| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| Broadcom B43 wireless driver | |
| LED control | |
| Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, | |
| Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it> | |
| Copyright (c) 2005-2007 Michael Buesch <m@bues.ch> | |
| Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org> | |
| Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> | |
| */ | |
| #include "b43legacy.h" | |
| #include "leds.h" | |
| #include "rfkill.h" | |
| static void b43legacy_led_turn_on(struct b43legacy_wldev *dev, u8 led_index, | |
| bool activelow) | |
| { | |
| struct b43legacy_wl *wl = dev->wl; | |
| unsigned long flags; | |
| u16 ctl; | |
| spin_lock_irqsave(&wl->leds_lock, flags); | |
| ctl = b43legacy_read16(dev, B43legacy_MMIO_GPIO_CONTROL); | |
| if (activelow) | |
| ctl &= ~(1 << led_index); | |
| else | |
| ctl |= (1 << led_index); | |
| b43legacy_write16(dev, B43legacy_MMIO_GPIO_CONTROL, ctl); | |
| spin_unlock_irqrestore(&wl->leds_lock, flags); | |
| } | |
| static void b43legacy_led_turn_off(struct b43legacy_wldev *dev, u8 led_index, | |
| bool activelow) | |
| { | |
| struct b43legacy_wl *wl = dev->wl; | |
| unsigned long flags; | |
| u16 ctl; | |
| spin_lock_irqsave(&wl->leds_lock, flags); | |
| ctl = b43legacy_read16(dev, B43legacy_MMIO_GPIO_CONTROL); | |
| if (activelow) | |
| ctl |= (1 << led_index); | |
| else | |
| ctl &= ~(1 << led_index); | |
| b43legacy_write16(dev, B43legacy_MMIO_GPIO_CONTROL, ctl); | |
| spin_unlock_irqrestore(&wl->leds_lock, flags); | |
| } | |
| /* Callback from the LED subsystem. */ | |
| static void b43legacy_led_brightness_set(struct led_classdev *led_dev, | |
| enum led_brightness brightness) | |
| { | |
| struct b43legacy_led *led = container_of(led_dev, struct b43legacy_led, | |
| led_dev); | |
| struct b43legacy_wldev *dev = led->dev; | |
| bool radio_enabled; | |
| /* Checking the radio-enabled status here is slightly racy, | |
| * but we want to avoid the locking overhead and we don't care | |
| * whether the LED has the wrong state for a second. */ | |
| radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable); | |
| if (brightness == LED_OFF || !radio_enabled) | |
| b43legacy_led_turn_off(dev, led->index, led->activelow); | |
| else | |
| b43legacy_led_turn_on(dev, led->index, led->activelow); | |
| } | |
| static int b43legacy_register_led(struct b43legacy_wldev *dev, | |
| struct b43legacy_led *led, | |
| const char *name, | |
| const char *default_trigger, | |
| u8 led_index, bool activelow) | |
| { | |
| int err; | |
| b43legacy_led_turn_off(dev, led_index, activelow); | |
| if (led->dev) | |
| return -EEXIST; | |
| if (!default_trigger) | |
| return -EINVAL; | |
| led->dev = dev; | |
| led->index = led_index; | |
| led->activelow = activelow; | |
| strscpy(led->name, name, sizeof(led->name)); | |
| led->led_dev.name = led->name; | |
| led->led_dev.default_trigger = default_trigger; | |
| led->led_dev.brightness_set = b43legacy_led_brightness_set; | |
| err = led_classdev_register(dev->dev->dev, &led->led_dev); | |
| if (err) { | |
| b43legacywarn(dev->wl, "LEDs: Failed to register %s\n", name); | |
| led->dev = NULL; | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static void b43legacy_unregister_led(struct b43legacy_led *led) | |
| { | |
| if (!led->dev) | |
| return; | |
| led_classdev_unregister(&led->led_dev); | |
| b43legacy_led_turn_off(led->dev, led->index, led->activelow); | |
| led->dev = NULL; | |
| } | |
| static void b43legacy_map_led(struct b43legacy_wldev *dev, | |
| u8 led_index, | |
| enum b43legacy_led_behaviour behaviour, | |
| bool activelow) | |
| { | |
| struct ieee80211_hw *hw = dev->wl->hw; | |
| char name[B43legacy_LED_MAX_NAME_LEN + 1]; | |
| /* Map the b43 specific LED behaviour value to the | |
| * generic LED triggers. */ | |
| switch (behaviour) { | |
| case B43legacy_LED_INACTIVE: | |
| break; | |
| case B43legacy_LED_OFF: | |
| b43legacy_led_turn_off(dev, led_index, activelow); | |
| break; | |
| case B43legacy_LED_ON: | |
| b43legacy_led_turn_on(dev, led_index, activelow); | |
| break; | |
| case B43legacy_LED_ACTIVITY: | |
| case B43legacy_LED_TRANSFER: | |
| case B43legacy_LED_APTRANSFER: | |
| snprintf(name, sizeof(name), | |
| "b43legacy-%s::tx", wiphy_name(hw->wiphy)); | |
| b43legacy_register_led(dev, &dev->led_tx, name, | |
| ieee80211_get_tx_led_name(hw), | |
| led_index, activelow); | |
| snprintf(name, sizeof(name), | |
| "b43legacy-%s::rx", wiphy_name(hw->wiphy)); | |
| b43legacy_register_led(dev, &dev->led_rx, name, | |
| ieee80211_get_rx_led_name(hw), | |
| led_index, activelow); | |
| break; | |
| case B43legacy_LED_RADIO_ALL: | |
| case B43legacy_LED_RADIO_A: | |
| case B43legacy_LED_RADIO_B: | |
| case B43legacy_LED_MODE_BG: | |
| snprintf(name, sizeof(name), | |
| "b43legacy-%s::radio", wiphy_name(hw->wiphy)); | |
| b43legacy_register_led(dev, &dev->led_radio, name, | |
| ieee80211_get_radio_led_name(hw), | |
| led_index, activelow); | |
| /* Sync the RF-kill LED state with radio and switch states. */ | |
| if (dev->phy.radio_on && b43legacy_is_hw_radio_enabled(dev)) | |
| b43legacy_led_turn_on(dev, led_index, activelow); | |
| break; | |
| case B43legacy_LED_WEIRD: | |
| case B43legacy_LED_ASSOC: | |
| snprintf(name, sizeof(name), | |
| "b43legacy-%s::assoc", wiphy_name(hw->wiphy)); | |
| b43legacy_register_led(dev, &dev->led_assoc, name, | |
| ieee80211_get_assoc_led_name(hw), | |
| led_index, activelow); | |
| break; | |
| default: | |
| b43legacywarn(dev->wl, "LEDs: Unknown behaviour 0x%02X\n", | |
| behaviour); | |
| break; | |
| } | |
| } | |
| void b43legacy_leds_init(struct b43legacy_wldev *dev) | |
| { | |
| struct ssb_bus *bus = dev->dev->bus; | |
| u8 sprom[4]; | |
| int i; | |
| enum b43legacy_led_behaviour behaviour; | |
| bool activelow; | |
| sprom[0] = bus->sprom.gpio0; | |
| sprom[1] = bus->sprom.gpio1; | |
| sprom[2] = bus->sprom.gpio2; | |
| sprom[3] = bus->sprom.gpio3; | |
| for (i = 0; i < 4; i++) { | |
| if (sprom[i] == 0xFF) { | |
| /* There is no LED information in the SPROM | |
| * for this LED. Hardcode it here. */ | |
| activelow = false; | |
| switch (i) { | |
| case 0: | |
| behaviour = B43legacy_LED_ACTIVITY; | |
| activelow = true; | |
| if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ) | |
| behaviour = B43legacy_LED_RADIO_ALL; | |
| break; | |
| case 1: | |
| behaviour = B43legacy_LED_RADIO_B; | |
| if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK) | |
| behaviour = B43legacy_LED_ASSOC; | |
| break; | |
| case 2: | |
| behaviour = B43legacy_LED_RADIO_A; | |
| break; | |
| case 3: | |
| behaviour = B43legacy_LED_OFF; | |
| break; | |
| default: | |
| B43legacy_WARN_ON(1); | |
| return; | |
| } | |
| } else { | |
| behaviour = sprom[i] & B43legacy_LED_BEHAVIOUR; | |
| activelow = !!(sprom[i] & B43legacy_LED_ACTIVELOW); | |
| } | |
| b43legacy_map_led(dev, i, behaviour, activelow); | |
| } | |
| } | |
| void b43legacy_leds_exit(struct b43legacy_wldev *dev) | |
| { | |
| b43legacy_unregister_led(&dev->led_tx); | |
| b43legacy_unregister_led(&dev->led_rx); | |
| b43legacy_unregister_led(&dev->led_assoc); | |
| b43legacy_unregister_led(&dev->led_radio); | |
| } |