| /* | |
| * Copyright (c) 2006 Damien Bergamini <damien.bergamini@free.fr> | |
| * Copyright (c) 2006 Sam Leffler, Errno Consulting | |
| * Copyright (c) 2007 Christoph Hellwig <hch@lst.de> | |
| * Copyright (c) 2008-2009 Weongyo Jeong <weongyo@freebsd.org> | |
| * Copyright (c) 2012 Pontus Fuchs <pontus.fuchs@gmail.com> | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| */ | |
| /* | |
| * This driver is based on the uath driver written by Damien Bergamini for | |
| * OpenBSD, who did black-box analysis of the Windows binary driver to find | |
| * out how the hardware works. It contains a lot magic numbers because of | |
| * that and only has minimal functionality. | |
| */ | |
| #include <linux/compiler.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/list.h> | |
| #include <linux/completion.h> | |
| #include <linux/firmware.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/usb.h> | |
| #include <net/mac80211.h> | |
| #include "ar5523.h" | |
| #include "ar5523_hw.h" | |
| /* | |
| * Various supported device vendors/products. | |
| * UB51: AR5005UG 802.11b/g, UB52: AR5005UX 802.11a/b/g | |
| */ | |
| static int ar5523_submit_rx_cmd(struct ar5523 *ar); | |
| static void ar5523_data_tx_pkt_put(struct ar5523 *ar); | |
| static void ar5523_read_reply(struct ar5523 *ar, struct ar5523_cmd_hdr *hdr, | |
| struct ar5523_tx_cmd *cmd) | |
| { | |
| int dlen, olen; | |
| __be32 *rp; | |
| dlen = be32_to_cpu(hdr->len) - sizeof(*hdr); | |
| if (dlen < 0) { | |
| WARN_ON(1); | |
| goto out; | |
| } | |
| ar5523_dbg(ar, "Code = %d len = %d\n", be32_to_cpu(hdr->code) & 0xff, | |
| dlen); | |
| rp = (__be32 *)(hdr + 1); | |
| if (dlen >= sizeof(u32)) { | |
| olen = be32_to_cpu(rp[0]); | |
| dlen -= sizeof(u32); | |
| if (olen == 0) { | |
| /* convention is 0 =>'s one word */ | |
| olen = sizeof(u32); | |
| } | |
| } else | |
| olen = 0; | |
| if (cmd->odata) { | |
| if (cmd->olen < olen) { | |
| ar5523_err(ar, "olen too small %d < %d\n", | |
| cmd->olen, olen); | |
| cmd->olen = 0; | |
| cmd->res = -EOVERFLOW; | |
| } else { | |
| cmd->olen = olen; | |
| memcpy(cmd->odata, &rp[1], olen); | |
| cmd->res = 0; | |
| } | |
| } | |
| out: | |
| complete(&cmd->done); | |
| } | |
| static void ar5523_cmd_rx_cb(struct urb *urb) | |
| { | |
| struct ar5523 *ar = urb->context; | |
| struct ar5523_tx_cmd *cmd = &ar->tx_cmd; | |
| struct ar5523_cmd_hdr *hdr = ar->rx_cmd_buf; | |
| int dlen; | |
| u32 code, hdrlen; | |
| if (urb->status) { | |
| if (urb->status != -ESHUTDOWN) | |
| ar5523_err(ar, "RX USB error %d.\n", urb->status); | |
| goto skip; | |
| } | |
| if (urb->actual_length < sizeof(struct ar5523_cmd_hdr)) { | |
| ar5523_err(ar, "RX USB too short.\n"); | |
| goto skip; | |
| } | |
| ar5523_dbg(ar, "%s code %02x priv %d\n", __func__, | |
| be32_to_cpu(hdr->code) & 0xff, hdr->priv); | |
| code = be32_to_cpu(hdr->code); | |
| hdrlen = be32_to_cpu(hdr->len); | |
| switch (code & 0xff) { | |
| default: | |
| /* reply to a read command */ | |
| if (hdr->priv != AR5523_CMD_ID) { | |
| ar5523_err(ar, "Unexpected command id: %02x\n", | |
| code & 0xff); | |
| goto skip; | |
| } | |
| ar5523_read_reply(ar, hdr, cmd); | |
| break; | |
| case WDCMSG_DEVICE_AVAIL: | |
| ar5523_dbg(ar, "WDCMSG_DEVICE_AVAIL\n"); | |
| cmd->res = 0; | |
| cmd->olen = 0; | |
| complete(&cmd->done); | |
| break; | |
| case WDCMSG_SEND_COMPLETE: | |
| ar5523_dbg(ar, "WDCMSG_SEND_COMPLETE: %d pending\n", | |
| atomic_read(&ar->tx_nr_pending)); | |
| if (!test_bit(AR5523_HW_UP, &ar->flags)) | |
| ar5523_dbg(ar, "Unexpected WDCMSG_SEND_COMPLETE\n"); | |
| else { | |
| mod_timer(&ar->tx_wd_timer, | |
| jiffies + AR5523_TX_WD_TIMEOUT); | |
| ar5523_data_tx_pkt_put(ar); | |
| } | |
| break; | |
| case WDCMSG_TARGET_START: | |
| /* This command returns a bogus id so it needs special | |
| handling */ | |
| dlen = hdrlen - sizeof(*hdr); | |
| if (dlen != (int)sizeof(u32)) { | |
| ar5523_err(ar, "Invalid reply to WDCMSG_TARGET_START"); | |
| return; | |
| } | |
| if (!cmd->odata) { | |
| ar5523_err(ar, "Unexpected WDCMSG_TARGET_START reply"); | |
| return; | |
| } | |
| memcpy(cmd->odata, hdr + 1, sizeof(u32)); | |
| cmd->olen = sizeof(u32); | |
| cmd->res = 0; | |
| complete(&cmd->done); | |
| break; | |
| case WDCMSG_STATS_UPDATE: | |
| ar5523_dbg(ar, "WDCMSG_STATS_UPDATE\n"); | |
| break; | |
| } | |
| skip: | |
| ar5523_submit_rx_cmd(ar); | |
| } | |
| static int ar5523_alloc_rx_cmd(struct ar5523 *ar) | |
| { | |
| ar->rx_cmd_urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!ar->rx_cmd_urb) | |
| return -ENOMEM; | |
| ar->rx_cmd_buf = usb_alloc_coherent(ar->dev, AR5523_MAX_RXCMDSZ, | |
| GFP_KERNEL, | |
| &ar->rx_cmd_urb->transfer_dma); | |
| if (!ar->rx_cmd_buf) { | |
| usb_free_urb(ar->rx_cmd_urb); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| static void ar5523_cancel_rx_cmd(struct ar5523 *ar) | |
| { | |
| usb_kill_urb(ar->rx_cmd_urb); | |
| } | |
| static void ar5523_free_rx_cmd(struct ar5523 *ar) | |
| { | |
| usb_free_coherent(ar->dev, AR5523_MAX_RXCMDSZ, | |
| ar->rx_cmd_buf, ar->rx_cmd_urb->transfer_dma); | |
| usb_free_urb(ar->rx_cmd_urb); | |
| } | |
| static int ar5523_submit_rx_cmd(struct ar5523 *ar) | |
| { | |
| int error; | |
| usb_fill_bulk_urb(ar->rx_cmd_urb, ar->dev, | |
| ar5523_cmd_rx_pipe(ar->dev), ar->rx_cmd_buf, | |
| AR5523_MAX_RXCMDSZ, ar5523_cmd_rx_cb, ar); | |
| ar->rx_cmd_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| error = usb_submit_urb(ar->rx_cmd_urb, GFP_ATOMIC); | |
| if (error) { | |
| if (error != -ENODEV) | |
| ar5523_err(ar, "error %d when submitting rx urb\n", | |
| error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Command submitted cb | |
| */ | |
| static void ar5523_cmd_tx_cb(struct urb *urb) | |
| { | |
| struct ar5523_tx_cmd *cmd = urb->context; | |
| struct ar5523 *ar = cmd->ar; | |
| if (urb->status) { | |
| ar5523_err(ar, "Failed to TX command. Status = %d\n", | |
| urb->status); | |
| cmd->res = urb->status; | |
| complete(&cmd->done); | |
| return; | |
| } | |
| if (!(cmd->flags & AR5523_CMD_FLAG_READ)) { | |
| cmd->res = 0; | |
| complete(&cmd->done); | |
| } | |
| } | |
| static void ar5523_cancel_tx_cmd(struct ar5523 *ar) | |
| { | |
| usb_kill_urb(ar->tx_cmd.urb_tx); | |
| } | |
| static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata, | |
| int ilen, void *odata, int olen, int flags) | |
| { | |
| struct ar5523_cmd_hdr *hdr; | |
| struct ar5523_tx_cmd *cmd = &ar->tx_cmd; | |
| int xferlen, error; | |
| /* always bulk-out a multiple of 4 bytes */ | |
| xferlen = (sizeof(struct ar5523_cmd_hdr) + ilen + 3) & ~3; | |
| hdr = cmd->buf_tx; | |
| memset(hdr, 0, sizeof(struct ar5523_cmd_hdr)); | |
| hdr->len = cpu_to_be32(xferlen); | |
| hdr->code = cpu_to_be32(code); | |
| hdr->priv = AR5523_CMD_ID; | |
| if (flags & AR5523_CMD_FLAG_MAGIC) | |
| hdr->magic = cpu_to_be32(1 << 24); | |
| if (ilen) | |
| memcpy(hdr + 1, idata, ilen); | |
| cmd->odata = odata; | |
| cmd->olen = olen; | |
| cmd->flags = flags; | |
| ar5523_dbg(ar, "do cmd %02x\n", code); | |
| usb_fill_bulk_urb(cmd->urb_tx, ar->dev, ar5523_cmd_tx_pipe(ar->dev), | |
| cmd->buf_tx, xferlen, ar5523_cmd_tx_cb, cmd); | |
| cmd->urb_tx->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| error = usb_submit_urb(cmd->urb_tx, GFP_KERNEL); | |
| if (error) { | |
| ar5523_err(ar, "could not send command 0x%x, error=%d\n", | |
| code, error); | |
| return error; | |
| } | |
| if (!wait_for_completion_timeout(&cmd->done, 2 * HZ)) { | |
| ar5523_cancel_tx_cmd(ar); | |
| cmd->odata = NULL; | |
| ar5523_err(ar, "timeout waiting for command %02x reply\n", | |
| code); | |
| cmd->res = -ETIMEDOUT; | |
| } | |
| return cmd->res; | |
| } | |
| static int ar5523_cmd_write(struct ar5523 *ar, u32 code, const void *data, | |
| int len, int flags) | |
| { | |
| flags &= ~AR5523_CMD_FLAG_READ; | |
| return ar5523_cmd(ar, code, data, len, NULL, 0, flags); | |
| } | |
| static int ar5523_cmd_read(struct ar5523 *ar, u32 code, const void *idata, | |
| int ilen, void *odata, int olen, int flags) | |
| { | |
| flags |= AR5523_CMD_FLAG_READ; | |
| return ar5523_cmd(ar, code, idata, ilen, odata, olen, flags); | |
| } | |
| static int ar5523_config(struct ar5523 *ar, u32 reg, u32 val) | |
| { | |
| struct ar5523_write_mac write; | |
| int error; | |
| write.reg = cpu_to_be32(reg); | |
| write.len = cpu_to_be32(0); /* 0 = single write */ | |
| *(__be32 *)write.data = cpu_to_be32(val); | |
| error = ar5523_cmd_write(ar, WDCMSG_TARGET_SET_CONFIG, &write, | |
| 3 * sizeof(u32), 0); | |
| if (error != 0) | |
| ar5523_err(ar, "could not write register 0x%02x\n", reg); | |
| return error; | |
| } | |
| static int ar5523_config_multi(struct ar5523 *ar, u32 reg, const void *data, | |
| int len) | |
| { | |
| struct ar5523_write_mac write; | |
| int error; | |
| write.reg = cpu_to_be32(reg); | |
| write.len = cpu_to_be32(len); | |
| memcpy(write.data, data, len); | |
| /* properly handle the case where len is zero (reset) */ | |
| error = ar5523_cmd_write(ar, WDCMSG_TARGET_SET_CONFIG, &write, | |
| (len == 0) ? sizeof(u32) : 2 * sizeof(u32) + len, 0); | |
| if (error != 0) | |
| ar5523_err(ar, "could not write %d bytes to register 0x%02x\n", | |
| len, reg); | |
| return error; | |
| } | |
| static int ar5523_get_status(struct ar5523 *ar, u32 which, void *odata, | |
| int olen) | |
| { | |
| int error; | |
| __be32 which_be; | |
| which_be = cpu_to_be32(which); | |
| error = ar5523_cmd_read(ar, WDCMSG_TARGET_GET_STATUS, | |
| &which_be, sizeof(which_be), odata, olen, AR5523_CMD_FLAG_MAGIC); | |
| if (error != 0) | |
| ar5523_err(ar, "could not read EEPROM offset 0x%02x\n", which); | |
| return error; | |
| } | |
| static int ar5523_get_capability(struct ar5523 *ar, u32 cap, u32 *val) | |
| { | |
| int error; | |
| __be32 cap_be, val_be; | |
| cap_be = cpu_to_be32(cap); | |
| error = ar5523_cmd_read(ar, WDCMSG_TARGET_GET_CAPABILITY, &cap_be, | |
| sizeof(cap_be), &val_be, sizeof(__be32), | |
| AR5523_CMD_FLAG_MAGIC); | |
| if (error != 0) { | |
| ar5523_err(ar, "could not read capability %u\n", cap); | |
| return error; | |
| } | |
| *val = be32_to_cpu(val_be); | |
| return error; | |
| } | |
| static int ar5523_get_devcap(struct ar5523 *ar) | |
| { | |
| #define GETCAP(x) do { \ | |
| error = ar5523_get_capability(ar, x, &cap); \ | |
| if (error != 0) \ | |
| return error; \ | |
| ar5523_info(ar, "Cap: " \ | |
| "%s=0x%08x\n", #x, cap); \ | |
| } while (0) | |
| int error; | |
| u32 cap; | |
| /* collect device capabilities */ | |
| GETCAP(CAP_TARGET_VERSION); | |
| GETCAP(CAP_TARGET_REVISION); | |
| GETCAP(CAP_MAC_VERSION); | |
| GETCAP(CAP_MAC_REVISION); | |
| GETCAP(CAP_PHY_REVISION); | |
| GETCAP(CAP_ANALOG_5GHz_REVISION); | |
| GETCAP(CAP_ANALOG_2GHz_REVISION); | |
| GETCAP(CAP_REG_DOMAIN); | |
| GETCAP(CAP_REG_CAP_BITS); | |
| GETCAP(CAP_WIRELESS_MODES); | |
| GETCAP(CAP_CHAN_SPREAD_SUPPORT); | |
| GETCAP(CAP_COMPRESS_SUPPORT); | |
| GETCAP(CAP_BURST_SUPPORT); | |
| GETCAP(CAP_FAST_FRAMES_SUPPORT); | |
| GETCAP(CAP_CHAP_TUNING_SUPPORT); | |
| GETCAP(CAP_TURBOG_SUPPORT); | |
| GETCAP(CAP_TURBO_PRIME_SUPPORT); | |
| GETCAP(CAP_DEVICE_TYPE); | |
| GETCAP(CAP_WME_SUPPORT); | |
| GETCAP(CAP_TOTAL_QUEUES); | |
| GETCAP(CAP_CONNECTION_ID_MAX); | |
| GETCAP(CAP_LOW_5GHZ_CHAN); | |
| GETCAP(CAP_HIGH_5GHZ_CHAN); | |
| GETCAP(CAP_LOW_2GHZ_CHAN); | |
| GETCAP(CAP_HIGH_2GHZ_CHAN); | |
| GETCAP(CAP_TWICE_ANTENNAGAIN_5G); | |
| GETCAP(CAP_TWICE_ANTENNAGAIN_2G); | |
| GETCAP(CAP_CIPHER_AES_CCM); | |
| GETCAP(CAP_CIPHER_TKIP); | |
| GETCAP(CAP_MIC_TKIP); | |
| return 0; | |
| } | |
| static int ar5523_set_ledsteady(struct ar5523 *ar, int lednum, int ledmode) | |
| { | |
| struct ar5523_cmd_ledsteady led; | |
| led.lednum = cpu_to_be32(lednum); | |
| led.ledmode = cpu_to_be32(ledmode); | |
| ar5523_dbg(ar, "set %s led %s (steady)\n", | |
| (lednum == UATH_LED_LINK) ? "link" : "activity", | |
| ledmode ? "on" : "off"); | |
| return ar5523_cmd_write(ar, WDCMSG_SET_LED_STEADY, &led, sizeof(led), | |
| 0); | |
| } | |
| static int ar5523_set_rxfilter(struct ar5523 *ar, u32 bits, u32 op) | |
| { | |
| struct ar5523_cmd_rx_filter rxfilter; | |
| rxfilter.bits = cpu_to_be32(bits); | |
| rxfilter.op = cpu_to_be32(op); | |
| ar5523_dbg(ar, "setting Rx filter=0x%x flags=0x%x\n", bits, op); | |
| return ar5523_cmd_write(ar, WDCMSG_RX_FILTER, &rxfilter, | |
| sizeof(rxfilter), 0); | |
| } | |
| static int ar5523_reset_tx_queues(struct ar5523 *ar) | |
| { | |
| __be32 qid = cpu_to_be32(0); | |
| ar5523_dbg(ar, "resetting Tx queue\n"); | |
| return ar5523_cmd_write(ar, WDCMSG_RELEASE_TX_QUEUE, | |
| &qid, sizeof(qid), 0); | |
| } | |
| static int ar5523_set_chan(struct ar5523 *ar) | |
| { | |
| struct ieee80211_conf *conf = &ar->hw->conf; | |
| struct ar5523_cmd_reset reset; | |
| memset(&reset, 0, sizeof(reset)); | |
| reset.flags |= cpu_to_be32(UATH_CHAN_2GHZ); | |
| reset.flags |= cpu_to_be32(UATH_CHAN_OFDM); | |
| reset.freq = cpu_to_be32(conf->chandef.chan->center_freq); | |
| reset.maxrdpower = cpu_to_be32(50); /* XXX */ | |
| reset.channelchange = cpu_to_be32(1); | |
| reset.keeprccontent = cpu_to_be32(0); | |
| ar5523_dbg(ar, "set chan flags 0x%x freq %d\n", | |
| be32_to_cpu(reset.flags), | |
| conf->chandef.chan->center_freq); | |
| return ar5523_cmd_write(ar, WDCMSG_RESET, &reset, sizeof(reset), 0); | |
| } | |
| static int ar5523_queue_init(struct ar5523 *ar) | |
| { | |
| struct ar5523_cmd_txq_setup qinfo; | |
| ar5523_dbg(ar, "setting up Tx queue\n"); | |
| qinfo.qid = cpu_to_be32(0); | |
| qinfo.len = cpu_to_be32(sizeof(qinfo.attr)); | |
| qinfo.attr.priority = cpu_to_be32(0); /* XXX */ | |
| qinfo.attr.aifs = cpu_to_be32(3); | |
| qinfo.attr.logcwmin = cpu_to_be32(4); | |
| qinfo.attr.logcwmax = cpu_to_be32(10); | |
| qinfo.attr.bursttime = cpu_to_be32(0); | |
| qinfo.attr.mode = cpu_to_be32(0); | |
| qinfo.attr.qflags = cpu_to_be32(1); /* XXX? */ | |
| return ar5523_cmd_write(ar, WDCMSG_SETUP_TX_QUEUE, &qinfo, | |
| sizeof(qinfo), 0); | |
| } | |
| static int ar5523_switch_chan(struct ar5523 *ar) | |
| { | |
| int error; | |
| error = ar5523_set_chan(ar); | |
| if (error) { | |
| ar5523_err(ar, "could not set chan, error %d\n", error); | |
| goto out_err; | |
| } | |
| /* reset Tx rings */ | |
| error = ar5523_reset_tx_queues(ar); | |
| if (error) { | |
| ar5523_err(ar, "could not reset Tx queues, error %d\n", | |
| error); | |
| goto out_err; | |
| } | |
| /* set Tx rings WME properties */ | |
| error = ar5523_queue_init(ar); | |
| if (error) | |
| ar5523_err(ar, "could not init wme, error %d\n", error); | |
| out_err: | |
| return error; | |
| } | |
| static void ar5523_rx_data_put(struct ar5523 *ar, | |
| struct ar5523_rx_data *data) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&ar->rx_data_list_lock, flags); | |
| list_move(&data->list, &ar->rx_data_free); | |
| spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); | |
| } | |
| static void ar5523_data_rx_cb(struct urb *urb) | |
| { | |
| struct ar5523_rx_data *data = urb->context; | |
| struct ar5523 *ar = data->ar; | |
| struct ar5523_rx_desc *desc; | |
| struct ar5523_chunk *chunk; | |
| struct ieee80211_hw *hw = ar->hw; | |
| struct ieee80211_rx_status *rx_status; | |
| u32 rxlen; | |
| int usblen = urb->actual_length; | |
| int hdrlen, pad; | |
| ar5523_dbg(ar, "%s\n", __func__); | |
| /* sync/async unlink faults aren't errors */ | |
| if (urb->status) { | |
| if (urb->status != -ESHUTDOWN) | |
| ar5523_err(ar, "%s: USB err: %d\n", __func__, | |
| urb->status); | |
| goto skip; | |
| } | |
| if (usblen < AR5523_MIN_RXBUFSZ) { | |
| ar5523_err(ar, "RX: wrong xfer size (usblen=%d)\n", usblen); | |
| goto skip; | |
| } | |
| chunk = (struct ar5523_chunk *) data->skb->data; | |
| if (((chunk->flags & UATH_CFLAGS_FINAL) == 0) || | |
| chunk->seqnum != 0) { | |
| ar5523_dbg(ar, "RX: No final flag. s: %d f: %02x l: %d\n", | |
| chunk->seqnum, chunk->flags, | |
| be16_to_cpu(chunk->length)); | |
| goto skip; | |
| } | |
| /* Rx descriptor is located at the end, 32-bit aligned */ | |
| desc = (struct ar5523_rx_desc *) | |
| (data->skb->data + usblen - sizeof(struct ar5523_rx_desc)); | |
| rxlen = be32_to_cpu(desc->len); | |
| if (rxlen > ar->rxbufsz) { | |
| ar5523_dbg(ar, "RX: Bad descriptor (len=%d)\n", | |
| be32_to_cpu(desc->len)); | |
| goto skip; | |
| } | |
| if (!rxlen) { | |
| ar5523_dbg(ar, "RX: rxlen is 0\n"); | |
| goto skip; | |
| } | |
| if (be32_to_cpu(desc->status) != 0) { | |
| ar5523_dbg(ar, "Bad RX status (0x%x len = %d). Skip\n", | |
| be32_to_cpu(desc->status), be32_to_cpu(desc->len)); | |
| goto skip; | |
| } | |
| skb_reserve(data->skb, sizeof(*chunk)); | |
| skb_put(data->skb, rxlen - sizeof(struct ar5523_rx_desc)); | |
| hdrlen = ieee80211_get_hdrlen_from_skb(data->skb); | |
| if (!IS_ALIGNED(hdrlen, 4)) { | |
| ar5523_dbg(ar, "eek, alignment workaround activated\n"); | |
| pad = ALIGN(hdrlen, 4) - hdrlen; | |
| memmove(data->skb->data + pad, data->skb->data, hdrlen); | |
| skb_pull(data->skb, pad); | |
| skb_put(data->skb, pad); | |
| } | |
| rx_status = IEEE80211_SKB_RXCB(data->skb); | |
| memset(rx_status, 0, sizeof(*rx_status)); | |
| rx_status->freq = be32_to_cpu(desc->channel); | |
| rx_status->band = hw->conf.chandef.chan->band; | |
| rx_status->signal = -95 + be32_to_cpu(desc->rssi); | |
| ieee80211_rx_irqsafe(hw, data->skb); | |
| data->skb = NULL; | |
| skip: | |
| if (data->skb) { | |
| dev_kfree_skb_irq(data->skb); | |
| data->skb = NULL; | |
| } | |
| ar5523_rx_data_put(ar, data); | |
| if (atomic_inc_return(&ar->rx_data_free_cnt) >= | |
| AR5523_RX_DATA_REFILL_COUNT && | |
| test_bit(AR5523_HW_UP, &ar->flags)) | |
| queue_work(ar->wq, &ar->rx_refill_work); | |
| } | |
| static void ar5523_rx_refill_work(struct work_struct *work) | |
| { | |
| struct ar5523 *ar = container_of(work, struct ar5523, rx_refill_work); | |
| struct ar5523_rx_data *data; | |
| unsigned long flags; | |
| int error; | |
| ar5523_dbg(ar, "%s\n", __func__); | |
| do { | |
| spin_lock_irqsave(&ar->rx_data_list_lock, flags); | |
| if (!list_empty(&ar->rx_data_free)) | |
| data = (struct ar5523_rx_data *) ar->rx_data_free.next; | |
| else | |
| data = NULL; | |
| spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); | |
| if (!data) | |
| goto done; | |
| data->skb = alloc_skb(ar->rxbufsz, GFP_KERNEL); | |
| if (!data->skb) { | |
| ar5523_err(ar, "could not allocate rx skbuff\n"); | |
| return; | |
| } | |
| usb_fill_bulk_urb(data->urb, ar->dev, | |
| ar5523_data_rx_pipe(ar->dev), data->skb->data, | |
| ar->rxbufsz, ar5523_data_rx_cb, data); | |
| spin_lock_irqsave(&ar->rx_data_list_lock, flags); | |
| list_move(&data->list, &ar->rx_data_used); | |
| spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); | |
| atomic_dec(&ar->rx_data_free_cnt); | |
| error = usb_submit_urb(data->urb, GFP_KERNEL); | |
| if (error) { | |
| kfree_skb(data->skb); | |
| if (error != -ENODEV) | |
| ar5523_err(ar, "Err sending rx data urb %d\n", | |
| error); | |
| ar5523_rx_data_put(ar, data); | |
| atomic_inc(&ar->rx_data_free_cnt); | |
| return; | |
| } | |
| } while (true); | |
| done: | |
| return; | |
| } | |
| static void ar5523_cancel_rx_bufs(struct ar5523 *ar) | |
| { | |
| struct ar5523_rx_data *data; | |
| unsigned long flags; | |
| do { | |
| spin_lock_irqsave(&ar->rx_data_list_lock, flags); | |
| if (!list_empty(&ar->rx_data_used)) | |
| data = (struct ar5523_rx_data *) ar->rx_data_used.next; | |
| else | |
| data = NULL; | |
| spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); | |
| if (!data) | |
| break; | |
| usb_kill_urb(data->urb); | |
| list_move(&data->list, &ar->rx_data_free); | |
| atomic_inc(&ar->rx_data_free_cnt); | |
| } while (data); | |
| } | |
| static void ar5523_free_rx_bufs(struct ar5523 *ar) | |
| { | |
| struct ar5523_rx_data *data; | |
| ar5523_cancel_rx_bufs(ar); | |
| while (!list_empty(&ar->rx_data_free)) { | |
| data = (struct ar5523_rx_data *) ar->rx_data_free.next; | |
| list_del(&data->list); | |
| usb_free_urb(data->urb); | |
| } | |
| } | |
| static int ar5523_alloc_rx_bufs(struct ar5523 *ar) | |
| { | |
| int i; | |
| for (i = 0; i < AR5523_RX_DATA_COUNT; i++) { | |
| struct ar5523_rx_data *data = &ar->rx_data[i]; | |
| data->ar = ar; | |
| data->urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!data->urb) | |
| goto err; | |
| list_add_tail(&data->list, &ar->rx_data_free); | |
| atomic_inc(&ar->rx_data_free_cnt); | |
| } | |
| return 0; | |
| err: | |
| ar5523_free_rx_bufs(ar); | |
| return -ENOMEM; | |
| } | |
| static void ar5523_data_tx_pkt_put(struct ar5523 *ar) | |
| { | |
| atomic_dec(&ar->tx_nr_total); | |
| if (!atomic_dec_return(&ar->tx_nr_pending)) { | |
| timer_delete(&ar->tx_wd_timer); | |
| wake_up(&ar->tx_flush_waitq); | |
| } | |
| if (atomic_read(&ar->tx_nr_total) < AR5523_TX_DATA_RESTART_COUNT) { | |
| ar5523_dbg(ar, "restart tx queue\n"); | |
| ieee80211_wake_queues(ar->hw); | |
| } | |
| } | |
| static void ar5523_data_tx_cb(struct urb *urb) | |
| { | |
| struct sk_buff *skb = urb->context; | |
| struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(skb); | |
| struct ar5523_tx_data *data = (struct ar5523_tx_data *) | |
| txi->driver_data; | |
| struct ar5523 *ar = data->ar; | |
| unsigned long flags; | |
| ar5523_dbg(ar, "data tx urb completed: %d\n", urb->status); | |
| spin_lock_irqsave(&ar->tx_data_list_lock, flags); | |
| list_del(&data->list); | |
| spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); | |
| if (urb->status) { | |
| ar5523_dbg(ar, "%s: urb status: %d\n", __func__, urb->status); | |
| ar5523_data_tx_pkt_put(ar); | |
| ieee80211_free_txskb(ar->hw, skb); | |
| } else { | |
| skb_pull(skb, sizeof(struct ar5523_tx_desc) + sizeof(__be32)); | |
| ieee80211_tx_status_irqsafe(ar->hw, skb); | |
| } | |
| usb_free_urb(urb); | |
| } | |
| static void ar5523_tx(struct ieee80211_hw *hw, | |
| struct ieee80211_tx_control *control, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(skb); | |
| struct ar5523_tx_data *data = (struct ar5523_tx_data *) | |
| txi->driver_data; | |
| struct ar5523 *ar = hw->priv; | |
| unsigned long flags; | |
| ar5523_dbg(ar, "tx called\n"); | |
| if (atomic_inc_return(&ar->tx_nr_total) >= AR5523_TX_DATA_COUNT) { | |
| ar5523_dbg(ar, "tx queue full\n"); | |
| ar5523_dbg(ar, "stop queues (tot %d pend %d)\n", | |
| atomic_read(&ar->tx_nr_total), | |
| atomic_read(&ar->tx_nr_pending)); | |
| ieee80211_stop_queues(hw); | |
| } | |
| spin_lock_irqsave(&ar->tx_data_list_lock, flags); | |
| list_add_tail(&data->list, &ar->tx_queue_pending); | |
| spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); | |
| ieee80211_queue_work(ar->hw, &ar->tx_work); | |
| } | |
| static void ar5523_tx_work_locked(struct ar5523 *ar) | |
| { | |
| struct ar5523_tx_data *data; | |
| struct ar5523_tx_desc *desc; | |
| struct ar5523_chunk *chunk; | |
| struct ieee80211_tx_info *txi; | |
| struct urb *urb; | |
| struct sk_buff *skb; | |
| int error = 0, paylen; | |
| u32 txqid; | |
| unsigned long flags; | |
| BUILD_BUG_ON(sizeof(struct ar5523_tx_data) > | |
| IEEE80211_TX_INFO_DRIVER_DATA_SIZE); | |
| ar5523_dbg(ar, "%s\n", __func__); | |
| do { | |
| spin_lock_irqsave(&ar->tx_data_list_lock, flags); | |
| if (!list_empty(&ar->tx_queue_pending)) { | |
| data = (struct ar5523_tx_data *) | |
| ar->tx_queue_pending.next; | |
| list_del(&data->list); | |
| } else | |
| data = NULL; | |
| spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); | |
| if (!data) | |
| break; | |
| txi = container_of((void *)data, struct ieee80211_tx_info, | |
| driver_data); | |
| txqid = 0; | |
| skb = container_of((void *)txi, struct sk_buff, cb); | |
| paylen = skb->len; | |
| urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!urb) { | |
| ieee80211_free_txskb(ar->hw, skb); | |
| continue; | |
| } | |
| data->ar = ar; | |
| data->urb = urb; | |
| desc = skb_push(skb, sizeof(*desc)); | |
| chunk = skb_push(skb, sizeof(*chunk)); | |
| chunk->seqnum = 0; | |
| chunk->flags = UATH_CFLAGS_FINAL; | |
| chunk->length = cpu_to_be16(skb->len); | |
| desc->msglen = cpu_to_be32(skb->len); | |
| desc->msgid = AR5523_DATA_ID; | |
| desc->buflen = cpu_to_be32(paylen); | |
| desc->type = cpu_to_be32(WDCMSG_SEND); | |
| desc->flags = cpu_to_be32(UATH_TX_NOTIFY); | |
| if (test_bit(AR5523_CONNECTED, &ar->flags)) | |
| desc->connid = cpu_to_be32(AR5523_ID_BSS); | |
| else | |
| desc->connid = cpu_to_be32(AR5523_ID_BROADCAST); | |
| if (txi->flags & IEEE80211_TX_CTL_USE_MINRATE) | |
| txqid |= UATH_TXQID_MINRATE; | |
| desc->txqid = cpu_to_be32(txqid); | |
| urb->transfer_flags = URB_ZERO_PACKET; | |
| usb_fill_bulk_urb(urb, ar->dev, ar5523_data_tx_pipe(ar->dev), | |
| skb->data, skb->len, ar5523_data_tx_cb, skb); | |
| spin_lock_irqsave(&ar->tx_data_list_lock, flags); | |
| list_add_tail(&data->list, &ar->tx_queue_submitted); | |
| spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); | |
| mod_timer(&ar->tx_wd_timer, jiffies + AR5523_TX_WD_TIMEOUT); | |
| atomic_inc(&ar->tx_nr_pending); | |
| ar5523_dbg(ar, "TX Frame (%d pending)\n", | |
| atomic_read(&ar->tx_nr_pending)); | |
| error = usb_submit_urb(urb, GFP_KERNEL); | |
| if (error) { | |
| ar5523_err(ar, "error %d when submitting tx urb\n", | |
| error); | |
| spin_lock_irqsave(&ar->tx_data_list_lock, flags); | |
| list_del(&data->list); | |
| spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); | |
| atomic_dec(&ar->tx_nr_pending); | |
| ar5523_data_tx_pkt_put(ar); | |
| usb_free_urb(urb); | |
| ieee80211_free_txskb(ar->hw, skb); | |
| } | |
| } while (true); | |
| } | |
| static void ar5523_tx_work(struct work_struct *work) | |
| { | |
| struct ar5523 *ar = container_of(work, struct ar5523, tx_work); | |
| ar5523_dbg(ar, "%s\n", __func__); | |
| mutex_lock(&ar->mutex); | |
| ar5523_tx_work_locked(ar); | |
| mutex_unlock(&ar->mutex); | |
| } | |
| static void ar5523_tx_wd_timer(struct timer_list *t) | |
| { | |
| struct ar5523 *ar = timer_container_of(ar, t, tx_wd_timer); | |
| ar5523_dbg(ar, "TX watchdog timer triggered\n"); | |
| ieee80211_queue_work(ar->hw, &ar->tx_wd_work); | |
| } | |
| static void ar5523_tx_wd_work(struct work_struct *work) | |
| { | |
| struct ar5523 *ar = container_of(work, struct ar5523, tx_wd_work); | |
| /* Occasionally the TX queues stop responding. The only way to | |
| * recover seems to be to reset the dongle. | |
| */ | |
| mutex_lock(&ar->mutex); | |
| ar5523_err(ar, "TX queue stuck (tot %d pend %d)\n", | |
| atomic_read(&ar->tx_nr_total), | |
| atomic_read(&ar->tx_nr_pending)); | |
| ar5523_err(ar, "Will restart dongle.\n"); | |
| ar5523_cmd_write(ar, WDCMSG_TARGET_RESET, NULL, 0, 0); | |
| mutex_unlock(&ar->mutex); | |
| } | |
| static void ar5523_flush_tx(struct ar5523 *ar) | |
| { | |
| ar5523_tx_work_locked(ar); | |
| /* Don't waste time trying to flush if USB is disconnected */ | |
| if (test_bit(AR5523_USB_DISCONNECTED, &ar->flags)) | |
| return; | |
| if (!wait_event_timeout(ar->tx_flush_waitq, | |
| !atomic_read(&ar->tx_nr_pending), AR5523_FLUSH_TIMEOUT)) | |
| ar5523_err(ar, "flush timeout (tot %d pend %d)\n", | |
| atomic_read(&ar->tx_nr_total), | |
| atomic_read(&ar->tx_nr_pending)); | |
| } | |
| static void ar5523_free_tx_cmd(struct ar5523 *ar) | |
| { | |
| struct ar5523_tx_cmd *cmd = &ar->tx_cmd; | |
| usb_free_coherent(ar->dev, AR5523_MAX_RXCMDSZ, cmd->buf_tx, | |
| cmd->urb_tx->transfer_dma); | |
| usb_free_urb(cmd->urb_tx); | |
| } | |
| static int ar5523_alloc_tx_cmd(struct ar5523 *ar) | |
| { | |
| struct ar5523_tx_cmd *cmd = &ar->tx_cmd; | |
| cmd->ar = ar; | |
| init_completion(&cmd->done); | |
| cmd->urb_tx = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!cmd->urb_tx) | |
| return -ENOMEM; | |
| cmd->buf_tx = usb_alloc_coherent(ar->dev, AR5523_MAX_TXCMDSZ, | |
| GFP_KERNEL, | |
| &cmd->urb_tx->transfer_dma); | |
| if (!cmd->buf_tx) { | |
| usb_free_urb(cmd->urb_tx); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * This function is called periodically (every second) when associated to | |
| * query device statistics. | |
| */ | |
| static void ar5523_stat_work(struct work_struct *work) | |
| { | |
| struct ar5523 *ar = container_of(work, struct ar5523, stat_work.work); | |
| int error; | |
| ar5523_dbg(ar, "%s\n", __func__); | |
| mutex_lock(&ar->mutex); | |
| /* | |
| * Send request for statistics asynchronously once a second. This | |
| * seems to be important. Throughput is a lot better if this is done. | |
| */ | |
| error = ar5523_cmd_write(ar, WDCMSG_TARGET_GET_STATS, NULL, 0, 0); | |
| if (error) | |
| ar5523_err(ar, "could not query stats, error %d\n", error); | |
| mutex_unlock(&ar->mutex); | |
| ieee80211_queue_delayed_work(ar->hw, &ar->stat_work, HZ); | |
| } | |
| /* | |
| * Interface routines to the mac80211 stack. | |
| */ | |
| static int ar5523_start(struct ieee80211_hw *hw) | |
| { | |
| struct ar5523 *ar = hw->priv; | |
| int error; | |
| __be32 val; | |
| ar5523_dbg(ar, "start called\n"); | |
| mutex_lock(&ar->mutex); | |
| val = cpu_to_be32(0); | |
| ar5523_cmd_write(ar, WDCMSG_BIND, &val, sizeof(val), 0); | |
| /* set MAC address */ | |
| ar5523_config_multi(ar, CFG_MAC_ADDR, &ar->hw->wiphy->perm_addr, | |
| ETH_ALEN); | |
| /* XXX honor net80211 state */ | |
| ar5523_config(ar, CFG_RATE_CONTROL_ENABLE, 0x00000001); | |
| ar5523_config(ar, CFG_DIVERSITY_CTL, 0x00000001); | |
| ar5523_config(ar, CFG_ABOLT, 0x0000003f); | |
| ar5523_config(ar, CFG_WME_ENABLED, 0x00000000); | |
| ar5523_config(ar, CFG_SERVICE_TYPE, 1); | |
| ar5523_config(ar, CFG_TP_SCALE, 0x00000000); | |
| ar5523_config(ar, CFG_TPC_HALF_DBM5, 0x0000003c); | |
| ar5523_config(ar, CFG_TPC_HALF_DBM2, 0x0000003c); | |
| ar5523_config(ar, CFG_OVERRD_TX_POWER, 0x00000000); | |
| ar5523_config(ar, CFG_GMODE_PROTECTION, 0x00000000); | |
| ar5523_config(ar, CFG_GMODE_PROTECT_RATE_INDEX, 0x00000003); | |
| ar5523_config(ar, CFG_PROTECTION_TYPE, 0x00000000); | |
| ar5523_config(ar, CFG_MODE_CTS, 0x00000002); | |
| error = ar5523_cmd_read(ar, WDCMSG_TARGET_START, NULL, 0, | |
| &val, sizeof(val), AR5523_CMD_FLAG_MAGIC); | |
| if (error) { | |
| ar5523_dbg(ar, "could not start target, error %d\n", error); | |
| goto err; | |
| } | |
| ar5523_dbg(ar, "WDCMSG_TARGET_START returns handle: 0x%x\n", | |
| be32_to_cpu(val)); | |
| ar5523_switch_chan(ar); | |
| val = cpu_to_be32(TARGET_DEVICE_AWAKE); | |
| ar5523_cmd_write(ar, WDCMSG_SET_PWR_MODE, &val, sizeof(val), 0); | |
| /* XXX? check */ | |
| ar5523_cmd_write(ar, WDCMSG_RESET_KEY_CACHE, NULL, 0, 0); | |
| set_bit(AR5523_HW_UP, &ar->flags); | |
| queue_work(ar->wq, &ar->rx_refill_work); | |
| /* enable Rx */ | |
| ar5523_set_rxfilter(ar, 0, UATH_FILTER_OP_INIT); | |
| ar5523_set_rxfilter(ar, | |
| UATH_FILTER_RX_UCAST | UATH_FILTER_RX_MCAST | | |
| UATH_FILTER_RX_BCAST | UATH_FILTER_RX_BEACON, | |
| UATH_FILTER_OP_SET); | |
| ar5523_set_ledsteady(ar, UATH_LED_ACTIVITY, UATH_LED_ON); | |
| ar5523_dbg(ar, "start OK\n"); | |
| err: | |
| mutex_unlock(&ar->mutex); | |
| return error; | |
| } | |
| static void ar5523_stop(struct ieee80211_hw *hw, bool suspend) | |
| { | |
| struct ar5523 *ar = hw->priv; | |
| ar5523_dbg(ar, "stop called\n"); | |
| cancel_delayed_work_sync(&ar->stat_work); | |
| mutex_lock(&ar->mutex); | |
| clear_bit(AR5523_HW_UP, &ar->flags); | |
| ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_OFF); | |
| ar5523_set_ledsteady(ar, UATH_LED_ACTIVITY, UATH_LED_OFF); | |
| ar5523_cmd_write(ar, WDCMSG_TARGET_STOP, NULL, 0, 0); | |
| timer_delete_sync(&ar->tx_wd_timer); | |
| cancel_work_sync(&ar->tx_wd_work); | |
| cancel_work_sync(&ar->rx_refill_work); | |
| ar5523_cancel_rx_bufs(ar); | |
| mutex_unlock(&ar->mutex); | |
| } | |
| static int ar5523_set_rts_threshold(struct ieee80211_hw *hw, int radio_idx, | |
| u32 value) | |
| { | |
| struct ar5523 *ar = hw->priv; | |
| int ret; | |
| ar5523_dbg(ar, "set_rts_threshold called\n"); | |
| mutex_lock(&ar->mutex); | |
| ret = ar5523_config(ar, CFG_USER_RTS_THRESHOLD, value); | |
| mutex_unlock(&ar->mutex); | |
| return ret; | |
| } | |
| static void ar5523_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | |
| u32 queues, bool drop) | |
| { | |
| struct ar5523 *ar = hw->priv; | |
| ar5523_dbg(ar, "flush called\n"); | |
| ar5523_flush_tx(ar); | |
| } | |
| static int ar5523_add_interface(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ar5523 *ar = hw->priv; | |
| ar5523_dbg(ar, "add interface called\n"); | |
| if (ar->vif) { | |
| ar5523_dbg(ar, "invalid add_interface\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| switch (vif->type) { | |
| case NL80211_IFTYPE_STATION: | |
| ar->vif = vif; | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static void ar5523_remove_interface(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ar5523 *ar = hw->priv; | |
| ar5523_dbg(ar, "remove interface called\n"); | |
| ar->vif = NULL; | |
| } | |
| static int ar5523_hwconfig(struct ieee80211_hw *hw, int radio_idx, u32 changed) | |
| { | |
| struct ar5523 *ar = hw->priv; | |
| ar5523_dbg(ar, "config called\n"); | |
| mutex_lock(&ar->mutex); | |
| if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { | |
| ar5523_dbg(ar, "Do channel switch\n"); | |
| ar5523_flush_tx(ar); | |
| ar5523_switch_chan(ar); | |
| } | |
| mutex_unlock(&ar->mutex); | |
| return 0; | |
| } | |
| static int ar5523_get_wlan_mode(struct ar5523 *ar, | |
| struct ieee80211_bss_conf *bss_conf) | |
| { | |
| struct ieee80211_supported_band *band; | |
| int bit; | |
| struct ieee80211_sta *sta; | |
| u32 sta_rate_set; | |
| band = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band]; | |
| sta = ieee80211_find_sta(ar->vif, bss_conf->bssid); | |
| if (!sta) { | |
| ar5523_info(ar, "STA not found!\n"); | |
| return WLAN_MODE_11b; | |
| } | |
| sta_rate_set = sta->deflink.supp_rates[ar->hw->conf.chandef.chan->band]; | |
| for (bit = 0; bit < band->n_bitrates; bit++) { | |
| if (sta_rate_set & 1) { | |
| int rate = band->bitrates[bit].bitrate; | |
| switch (rate) { | |
| case 60: | |
| case 90: | |
| case 120: | |
| case 180: | |
| case 240: | |
| case 360: | |
| case 480: | |
| case 540: | |
| return WLAN_MODE_11g; | |
| } | |
| } | |
| sta_rate_set >>= 1; | |
| } | |
| return WLAN_MODE_11b; | |
| } | |
| static void ar5523_create_rateset(struct ar5523 *ar, | |
| struct ieee80211_bss_conf *bss_conf, | |
| struct ar5523_cmd_rateset *rs, | |
| bool basic) | |
| { | |
| struct ieee80211_supported_band *band; | |
| struct ieee80211_sta *sta; | |
| int bit, i = 0; | |
| u32 sta_rate_set, basic_rate_set; | |
| sta = ieee80211_find_sta(ar->vif, bss_conf->bssid); | |
| basic_rate_set = bss_conf->basic_rates; | |
| if (!sta) { | |
| ar5523_info(ar, "STA not found. Cannot set rates\n"); | |
| sta_rate_set = bss_conf->basic_rates; | |
| } else | |
| sta_rate_set = sta->deflink.supp_rates[ar->hw->conf.chandef.chan->band]; | |
| ar5523_dbg(ar, "sta rate_set = %08x\n", sta_rate_set); | |
| band = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band]; | |
| for (bit = 0; bit < band->n_bitrates; bit++) { | |
| BUG_ON(i >= AR5523_MAX_NRATES); | |
| ar5523_dbg(ar, "Considering rate %d : %d\n", | |
| band->bitrates[bit].hw_value, sta_rate_set & 1); | |
| if (sta_rate_set & 1) { | |
| rs->set[i] = band->bitrates[bit].hw_value; | |
| if (basic_rate_set & 1 && basic) | |
| rs->set[i] |= 0x80; | |
| i++; | |
| } | |
| sta_rate_set >>= 1; | |
| basic_rate_set >>= 1; | |
| } | |
| rs->length = i; | |
| } | |
| static int ar5523_set_basic_rates(struct ar5523 *ar, | |
| struct ieee80211_bss_conf *bss) | |
| { | |
| struct ar5523_cmd_rates rates; | |
| memset(&rates, 0, sizeof(rates)); | |
| rates.connid = cpu_to_be32(2); /* XXX */ | |
| rates.size = cpu_to_be32(sizeof(struct ar5523_cmd_rateset)); | |
| ar5523_create_rateset(ar, bss, &rates.rateset, true); | |
| return ar5523_cmd_write(ar, WDCMSG_SET_BASIC_RATE, &rates, | |
| sizeof(rates), 0); | |
| } | |
| static int ar5523_create_connection(struct ar5523 *ar, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_bss_conf *bss) | |
| { | |
| struct ar5523_cmd_create_connection create; | |
| int wlan_mode; | |
| memset(&create, 0, sizeof(create)); | |
| create.connid = cpu_to_be32(2); | |
| create.bssid = cpu_to_be32(0); | |
| /* XXX packed or not? */ | |
| create.size = cpu_to_be32(sizeof(struct ar5523_cmd_rateset)); | |
| ar5523_create_rateset(ar, bss, &create.connattr.rateset, false); | |
| wlan_mode = ar5523_get_wlan_mode(ar, bss); | |
| create.connattr.wlanmode = cpu_to_be32(wlan_mode); | |
| return ar5523_cmd_write(ar, WDCMSG_CREATE_CONNECTION, &create, | |
| sizeof(create), 0); | |
| } | |
| static int ar5523_write_associd(struct ar5523 *ar, struct ieee80211_vif *vif) | |
| { | |
| struct ieee80211_bss_conf *bss = &vif->bss_conf; | |
| struct ar5523_cmd_set_associd associd; | |
| memset(&associd, 0, sizeof(associd)); | |
| associd.defaultrateix = cpu_to_be32(0); /* XXX */ | |
| associd.associd = cpu_to_be32(vif->cfg.aid); | |
| associd.timoffset = cpu_to_be32(0x3b); /* XXX */ | |
| memcpy(associd.bssid, bss->bssid, ETH_ALEN); | |
| return ar5523_cmd_write(ar, WDCMSG_WRITE_ASSOCID, &associd, | |
| sizeof(associd), 0); | |
| } | |
| static void ar5523_bss_info_changed(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_bss_conf *bss, | |
| u64 changed) | |
| { | |
| struct ar5523 *ar = hw->priv; | |
| int error; | |
| ar5523_dbg(ar, "bss_info_changed called\n"); | |
| mutex_lock(&ar->mutex); | |
| if (!(changed & BSS_CHANGED_ASSOC)) | |
| goto out_unlock; | |
| if (vif->cfg.assoc) { | |
| error = ar5523_create_connection(ar, vif, bss); | |
| if (error) { | |
| ar5523_err(ar, "could not create connection\n"); | |
| goto out_unlock; | |
| } | |
| error = ar5523_set_basic_rates(ar, bss); | |
| if (error) { | |
| ar5523_err(ar, "could not set negotiated rate set\n"); | |
| goto out_unlock; | |
| } | |
| error = ar5523_write_associd(ar, vif); | |
| if (error) { | |
| ar5523_err(ar, "could not set association\n"); | |
| goto out_unlock; | |
| } | |
| /* turn link LED on */ | |
| ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_ON); | |
| set_bit(AR5523_CONNECTED, &ar->flags); | |
| ieee80211_queue_delayed_work(hw, &ar->stat_work, HZ); | |
| } else { | |
| cancel_delayed_work(&ar->stat_work); | |
| clear_bit(AR5523_CONNECTED, &ar->flags); | |
| ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_OFF); | |
| } | |
| out_unlock: | |
| mutex_unlock(&ar->mutex); | |
| } | |
| #define AR5523_SUPPORTED_FILTERS (FIF_ALLMULTI | \ | |
| FIF_FCSFAIL | \ | |
| FIF_OTHER_BSS) | |
| static void ar5523_configure_filter(struct ieee80211_hw *hw, | |
| unsigned int changed_flags, | |
| unsigned int *total_flags, | |
| u64 multicast) | |
| { | |
| struct ar5523 *ar = hw->priv; | |
| u32 filter = 0; | |
| ar5523_dbg(ar, "configure_filter called\n"); | |
| mutex_lock(&ar->mutex); | |
| ar5523_flush_tx(ar); | |
| *total_flags &= AR5523_SUPPORTED_FILTERS; | |
| /* The filters seems strange. UATH_FILTER_RX_BCAST and | |
| * UATH_FILTER_RX_MCAST does not result in those frames being RXed. | |
| * The only way I have found to get [mb]cast frames seems to be | |
| * to set UATH_FILTER_RX_PROM. */ | |
| filter |= UATH_FILTER_RX_UCAST | UATH_FILTER_RX_MCAST | | |
| UATH_FILTER_RX_BCAST | UATH_FILTER_RX_BEACON | | |
| UATH_FILTER_RX_PROM; | |
| ar5523_set_rxfilter(ar, 0, UATH_FILTER_OP_INIT); | |
| ar5523_set_rxfilter(ar, filter, UATH_FILTER_OP_SET); | |
| mutex_unlock(&ar->mutex); | |
| } | |
| static const struct ieee80211_ops ar5523_ops = { | |
| .add_chanctx = ieee80211_emulate_add_chanctx, | |
| .remove_chanctx = ieee80211_emulate_remove_chanctx, | |
| .change_chanctx = ieee80211_emulate_change_chanctx, | |
| .switch_vif_chanctx = ieee80211_emulate_switch_vif_chanctx, | |
| .start = ar5523_start, | |
| .stop = ar5523_stop, | |
| .tx = ar5523_tx, | |
| .wake_tx_queue = ieee80211_handle_wake_tx_queue, | |
| .set_rts_threshold = ar5523_set_rts_threshold, | |
| .add_interface = ar5523_add_interface, | |
| .remove_interface = ar5523_remove_interface, | |
| .config = ar5523_hwconfig, | |
| .bss_info_changed = ar5523_bss_info_changed, | |
| .configure_filter = ar5523_configure_filter, | |
| .flush = ar5523_flush, | |
| }; | |
| static int ar5523_host_available(struct ar5523 *ar) | |
| { | |
| struct ar5523_cmd_host_available setup; | |
| /* inform target the host is available */ | |
| setup.sw_ver_major = cpu_to_be32(ATH_SW_VER_MAJOR); | |
| setup.sw_ver_minor = cpu_to_be32(ATH_SW_VER_MINOR); | |
| setup.sw_ver_patch = cpu_to_be32(ATH_SW_VER_PATCH); | |
| setup.sw_ver_build = cpu_to_be32(ATH_SW_VER_BUILD); | |
| return ar5523_cmd_read(ar, WDCMSG_HOST_AVAILABLE, | |
| &setup, sizeof(setup), NULL, 0, 0); | |
| } | |
| static int ar5523_get_devstatus(struct ar5523 *ar) | |
| { | |
| u8 macaddr[ETH_ALEN]; | |
| int error; | |
| /* retrieve MAC address */ | |
| error = ar5523_get_status(ar, ST_MAC_ADDR, macaddr, ETH_ALEN); | |
| if (error) { | |
| ar5523_err(ar, "could not read MAC address\n"); | |
| return error; | |
| } | |
| SET_IEEE80211_PERM_ADDR(ar->hw, macaddr); | |
| error = ar5523_get_status(ar, ST_SERIAL_NUMBER, | |
| &ar->serial[0], sizeof(ar->serial)); | |
| if (error) { | |
| ar5523_err(ar, "could not read device serial number\n"); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| #define AR5523_SANE_RXBUFSZ 2000 | |
| static int ar5523_get_max_rxsz(struct ar5523 *ar) | |
| { | |
| int error; | |
| __be32 rxsize; | |
| /* Get max rx size */ | |
| error = ar5523_get_status(ar, ST_WDC_TRANSPORT_CHUNK_SIZE, &rxsize, | |
| sizeof(rxsize)); | |
| if (error != 0) { | |
| ar5523_err(ar, "could not read max RX size\n"); | |
| return error; | |
| } | |
| ar->rxbufsz = be32_to_cpu(rxsize); | |
| if (!ar->rxbufsz || ar->rxbufsz > AR5523_SANE_RXBUFSZ) { | |
| ar5523_err(ar, "Bad rxbufsz from device. Using %d instead\n", | |
| AR5523_SANE_RXBUFSZ); | |
| ar->rxbufsz = AR5523_SANE_RXBUFSZ; | |
| } | |
| ar5523_dbg(ar, "Max RX buf size: %d\n", ar->rxbufsz); | |
| return 0; | |
| } | |
| /* | |
| * This is copied from rtl818x, but we should probably move this | |
| * to common code as in OpenBSD. | |
| */ | |
| static const struct ieee80211_rate ar5523_rates[] = { | |
| { .bitrate = 10, .hw_value = 2, }, | |
| { .bitrate = 20, .hw_value = 4 }, | |
| { .bitrate = 55, .hw_value = 11, }, | |
| { .bitrate = 110, .hw_value = 22, }, | |
| { .bitrate = 60, .hw_value = 12, }, | |
| { .bitrate = 90, .hw_value = 18, }, | |
| { .bitrate = 120, .hw_value = 24, }, | |
| { .bitrate = 180, .hw_value = 36, }, | |
| { .bitrate = 240, .hw_value = 48, }, | |
| { .bitrate = 360, .hw_value = 72, }, | |
| { .bitrate = 480, .hw_value = 96, }, | |
| { .bitrate = 540, .hw_value = 108, }, | |
| }; | |
| static const struct ieee80211_channel ar5523_channels[] = { | |
| { .center_freq = 2412 }, | |
| { .center_freq = 2417 }, | |
| { .center_freq = 2422 }, | |
| { .center_freq = 2427 }, | |
| { .center_freq = 2432 }, | |
| { .center_freq = 2437 }, | |
| { .center_freq = 2442 }, | |
| { .center_freq = 2447 }, | |
| { .center_freq = 2452 }, | |
| { .center_freq = 2457 }, | |
| { .center_freq = 2462 }, | |
| { .center_freq = 2467 }, | |
| { .center_freq = 2472 }, | |
| { .center_freq = 2484 }, | |
| }; | |
| static int ar5523_init_modes(struct ar5523 *ar) | |
| { | |
| BUILD_BUG_ON(sizeof(ar->channels) != sizeof(ar5523_channels)); | |
| BUILD_BUG_ON(sizeof(ar->rates) != sizeof(ar5523_rates)); | |
| memcpy(ar->channels, ar5523_channels, sizeof(ar5523_channels)); | |
| memcpy(ar->rates, ar5523_rates, sizeof(ar5523_rates)); | |
| ar->band.band = NL80211_BAND_2GHZ; | |
| ar->band.channels = ar->channels; | |
| ar->band.n_channels = ARRAY_SIZE(ar5523_channels); | |
| ar->band.bitrates = ar->rates; | |
| ar->band.n_bitrates = ARRAY_SIZE(ar5523_rates); | |
| ar->hw->wiphy->bands[NL80211_BAND_2GHZ] = &ar->band; | |
| return 0; | |
| } | |
| /* | |
| * Load the MIPS R4000 microcode into the device. Once the image is loaded, | |
| * the device will detach itself from the bus and reattach later with a new | |
| * product Id (a la ezusb). | |
| */ | |
| static int ar5523_load_firmware(struct usb_device *dev) | |
| { | |
| struct ar5523_fwblock *txblock, *rxblock; | |
| const struct firmware *fw; | |
| void *fwbuf; | |
| int len, offset; | |
| int foolen; /* XXX(hch): handle short transfers */ | |
| int error = -ENXIO; | |
| if (request_firmware(&fw, AR5523_FIRMWARE_FILE, &dev->dev)) { | |
| dev_err(&dev->dev, "no firmware found: %s\n", | |
| AR5523_FIRMWARE_FILE); | |
| return -ENOENT; | |
| } | |
| txblock = kzalloc_obj(*txblock); | |
| if (!txblock) | |
| goto out; | |
| rxblock = kmalloc_obj(*rxblock); | |
| if (!rxblock) | |
| goto out_free_txblock; | |
| fwbuf = kmalloc(AR5523_MAX_FWBLOCK_SIZE, GFP_KERNEL); | |
| if (!fwbuf) | |
| goto out_free_rxblock; | |
| txblock->flags = cpu_to_be32(AR5523_WRITE_BLOCK); | |
| txblock->total = cpu_to_be32(fw->size); | |
| offset = 0; | |
| len = fw->size; | |
| while (len > 0) { | |
| int mlen = min(len, AR5523_MAX_FWBLOCK_SIZE); | |
| txblock->remain = cpu_to_be32(len - mlen); | |
| txblock->len = cpu_to_be32(mlen); | |
| /* send firmware block meta-data */ | |
| error = usb_bulk_msg(dev, ar5523_cmd_tx_pipe(dev), | |
| txblock, sizeof(*txblock), &foolen, | |
| AR5523_CMD_TIMEOUT); | |
| if (error) { | |
| dev_err(&dev->dev, | |
| "could not send firmware block info\n"); | |
| goto out_free_fwbuf; | |
| } | |
| /* send firmware block data */ | |
| memcpy(fwbuf, fw->data + offset, mlen); | |
| error = usb_bulk_msg(dev, ar5523_data_tx_pipe(dev), | |
| fwbuf, mlen, &foolen, | |
| AR5523_DATA_TIMEOUT); | |
| if (error) { | |
| dev_err(&dev->dev, | |
| "could not send firmware block data\n"); | |
| goto out_free_fwbuf; | |
| } | |
| /* wait for ack from firmware */ | |
| error = usb_bulk_msg(dev, ar5523_cmd_rx_pipe(dev), | |
| rxblock, sizeof(*rxblock), &foolen, | |
| AR5523_CMD_TIMEOUT); | |
| if (error) { | |
| dev_err(&dev->dev, | |
| "could not read firmware answer\n"); | |
| goto out_free_fwbuf; | |
| } | |
| len -= mlen; | |
| offset += mlen; | |
| } | |
| /* | |
| * Set the error to -ENXIO to make sure we continue probing for | |
| * a driver. | |
| */ | |
| error = -ENXIO; | |
| out_free_fwbuf: | |
| kfree(fwbuf); | |
| out_free_rxblock: | |
| kfree(rxblock); | |
| out_free_txblock: | |
| kfree(txblock); | |
| out: | |
| release_firmware(fw); | |
| return error; | |
| } | |
| static int ar5523_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| struct usb_device *dev = interface_to_usbdev(intf); | |
| struct ieee80211_hw *hw; | |
| struct ar5523 *ar; | |
| int error = -ENOMEM; | |
| static const u8 bulk_ep_addr[] = { | |
| AR5523_CMD_TX_PIPE | USB_DIR_OUT, | |
| AR5523_DATA_TX_PIPE | USB_DIR_OUT, | |
| AR5523_CMD_RX_PIPE | USB_DIR_IN, | |
| AR5523_DATA_RX_PIPE | USB_DIR_IN, | |
| 0}; | |
| if (!usb_check_bulk_endpoints(intf, bulk_ep_addr)) { | |
| dev_err(&dev->dev, | |
| "Could not find all expected endpoints\n"); | |
| error = -ENODEV; | |
| goto out; | |
| } | |
| /* | |
| * Load firmware if the device requires it. This will return | |
| * -ENXIO on success and we'll get called back afer the usb | |
| * id changes to indicate that the firmware is present. | |
| */ | |
| if (id->driver_info & AR5523_FLAG_PRE_FIRMWARE) | |
| return ar5523_load_firmware(dev); | |
| hw = ieee80211_alloc_hw(sizeof(*ar), &ar5523_ops); | |
| if (!hw) | |
| goto out; | |
| SET_IEEE80211_DEV(hw, &intf->dev); | |
| ar = hw->priv; | |
| ar->hw = hw; | |
| ar->dev = dev; | |
| mutex_init(&ar->mutex); | |
| INIT_DELAYED_WORK(&ar->stat_work, ar5523_stat_work); | |
| timer_setup(&ar->tx_wd_timer, ar5523_tx_wd_timer, 0); | |
| INIT_WORK(&ar->tx_wd_work, ar5523_tx_wd_work); | |
| INIT_WORK(&ar->tx_work, ar5523_tx_work); | |
| INIT_LIST_HEAD(&ar->tx_queue_pending); | |
| INIT_LIST_HEAD(&ar->tx_queue_submitted); | |
| spin_lock_init(&ar->tx_data_list_lock); | |
| atomic_set(&ar->tx_nr_total, 0); | |
| atomic_set(&ar->tx_nr_pending, 0); | |
| init_waitqueue_head(&ar->tx_flush_waitq); | |
| atomic_set(&ar->rx_data_free_cnt, 0); | |
| INIT_WORK(&ar->rx_refill_work, ar5523_rx_refill_work); | |
| INIT_LIST_HEAD(&ar->rx_data_free); | |
| INIT_LIST_HEAD(&ar->rx_data_used); | |
| spin_lock_init(&ar->rx_data_list_lock); | |
| ar->wq = create_singlethread_workqueue("ar5523"); | |
| if (!ar->wq) { | |
| ar5523_err(ar, "Could not create wq\n"); | |
| goto out_free_ar; | |
| } | |
| error = ar5523_alloc_rx_bufs(ar); | |
| if (error) { | |
| ar5523_err(ar, "Could not allocate rx buffers\n"); | |
| goto out_free_wq; | |
| } | |
| error = ar5523_alloc_rx_cmd(ar); | |
| if (error) { | |
| ar5523_err(ar, "Could not allocate rx command buffers\n"); | |
| goto out_free_rx_bufs; | |
| } | |
| error = ar5523_alloc_tx_cmd(ar); | |
| if (error) { | |
| ar5523_err(ar, "Could not allocate tx command buffers\n"); | |
| goto out_free_rx_cmd; | |
| } | |
| error = ar5523_submit_rx_cmd(ar); | |
| if (error) { | |
| ar5523_err(ar, "Failed to submit rx cmd\n"); | |
| goto out_free_tx_cmd; | |
| } | |
| /* | |
| * We're now ready to send/receive firmware commands. | |
| */ | |
| error = ar5523_host_available(ar); | |
| if (error) { | |
| ar5523_err(ar, "could not initialize adapter\n"); | |
| goto out_cancel_rx_cmd; | |
| } | |
| error = ar5523_get_max_rxsz(ar); | |
| if (error) { | |
| ar5523_err(ar, "could not get caps from adapter\n"); | |
| goto out_cancel_rx_cmd; | |
| } | |
| error = ar5523_get_devcap(ar); | |
| if (error) { | |
| ar5523_err(ar, "could not get caps from adapter\n"); | |
| goto out_cancel_rx_cmd; | |
| } | |
| error = ar5523_get_devstatus(ar); | |
| if (error != 0) { | |
| ar5523_err(ar, "could not get device status\n"); | |
| goto out_cancel_rx_cmd; | |
| } | |
| ar5523_info(ar, "MAC/BBP AR5523, RF AR%c112\n", | |
| (id->driver_info & AR5523_FLAG_ABG) ? '5' : '2'); | |
| ar->vif = NULL; | |
| ieee80211_hw_set(hw, HAS_RATE_CONTROL); | |
| ieee80211_hw_set(hw, RX_INCLUDES_FCS); | |
| ieee80211_hw_set(hw, SIGNAL_DBM); | |
| hw->extra_tx_headroom = sizeof(struct ar5523_tx_desc) + | |
| sizeof(struct ar5523_chunk); | |
| hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); | |
| hw->queues = 1; | |
| error = ar5523_init_modes(ar); | |
| if (error) | |
| goto out_cancel_rx_cmd; | |
| wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); | |
| usb_set_intfdata(intf, hw); | |
| error = ieee80211_register_hw(hw); | |
| if (error) { | |
| ar5523_err(ar, "could not register device\n"); | |
| goto out_cancel_rx_cmd; | |
| } | |
| ar5523_info(ar, "Found and initialized AR5523 device\n"); | |
| return 0; | |
| out_cancel_rx_cmd: | |
| ar5523_cancel_rx_cmd(ar); | |
| out_free_tx_cmd: | |
| ar5523_free_tx_cmd(ar); | |
| out_free_rx_cmd: | |
| ar5523_free_rx_cmd(ar); | |
| out_free_rx_bufs: | |
| ar5523_free_rx_bufs(ar); | |
| out_free_wq: | |
| destroy_workqueue(ar->wq); | |
| out_free_ar: | |
| ieee80211_free_hw(hw); | |
| out: | |
| return error; | |
| } | |
| static void ar5523_disconnect(struct usb_interface *intf) | |
| { | |
| struct ieee80211_hw *hw = usb_get_intfdata(intf); | |
| struct ar5523 *ar = hw->priv; | |
| ar5523_dbg(ar, "detaching\n"); | |
| set_bit(AR5523_USB_DISCONNECTED, &ar->flags); | |
| ieee80211_unregister_hw(hw); | |
| ar5523_cancel_rx_cmd(ar); | |
| ar5523_free_tx_cmd(ar); | |
| ar5523_free_rx_cmd(ar); | |
| ar5523_free_rx_bufs(ar); | |
| destroy_workqueue(ar->wq); | |
| ieee80211_free_hw(hw); | |
| usb_set_intfdata(intf, NULL); | |
| } | |
| #define AR5523_DEVICE_UG(vendor, device) \ | |
| { USB_DEVICE((vendor), (device)) }, \ | |
| { USB_DEVICE((vendor), (device) + 1), \ | |
| .driver_info = AR5523_FLAG_PRE_FIRMWARE } | |
| #define AR5523_DEVICE_UX(vendor, device) \ | |
| { USB_DEVICE((vendor), (device)), \ | |
| .driver_info = AR5523_FLAG_ABG }, \ | |
| { USB_DEVICE((vendor), (device) + 1), \ | |
| .driver_info = AR5523_FLAG_ABG|AR5523_FLAG_PRE_FIRMWARE } | |
| static const struct usb_device_id ar5523_id_table[] = { | |
| AR5523_DEVICE_UG(0x168c, 0x0001), /* Atheros / AR5523 */ | |
| AR5523_DEVICE_UG(0x0cf3, 0x0001), /* Atheros2 / AR5523_1 */ | |
| AR5523_DEVICE_UG(0x0cf3, 0x0003), /* Atheros2 / AR5523_2 */ | |
| AR5523_DEVICE_UX(0x0cf3, 0x0005), /* Atheros2 / AR5523_3 */ | |
| AR5523_DEVICE_UG(0x0d8e, 0x7801), /* Conceptronic / AR5523_1 */ | |
| AR5523_DEVICE_UX(0x0d8e, 0x7811), /* Conceptronic / AR5523_2 */ | |
| AR5523_DEVICE_UX(0x2001, 0x3a00), /* Dlink / DWLAG132 */ | |
| AR5523_DEVICE_UG(0x2001, 0x3a02), /* Dlink / DWLG132 */ | |
| AR5523_DEVICE_UX(0x2001, 0x3a04), /* Dlink / DWLAG122 */ | |
| AR5523_DEVICE_UG(0x07d1, 0x3a07), /* D-Link / WUA-2340 rev A1 */ | |
| AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */ | |
| AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */ | |
| AR5523_DEVICE_UG(0x129b, 0x160b), /* Gigaset / USB stick 108 | |
| (CyberTAN Technology) */ | |
| AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */ | |
| AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */ | |
| AR5523_DEVICE_UG(0x0d8e, 0x7802), /* Globalsun / AR5523_3 */ | |
| AR5523_DEVICE_UX(0x0846, 0x4300), /* Netgear / WG111U */ | |
| AR5523_DEVICE_UG(0x0846, 0x4250), /* Netgear / WG111T */ | |
| AR5523_DEVICE_UG(0x0846, 0x5f00), /* Netgear / WPN111 */ | |
| AR5523_DEVICE_UG(0x083a, 0x4506), /* SMC / EZ Connect | |
| SMCWUSBT-G2 */ | |
| AR5523_DEVICE_UG(0x157e, 0x3006), /* Umedia / AR5523_1, TEW444UBEU*/ | |
| AR5523_DEVICE_UX(0x157e, 0x3205), /* Umedia / AR5523_2 */ | |
| AR5523_DEVICE_UG(0x1435, 0x0826), /* Wistronneweb / AR5523_1 */ | |
| AR5523_DEVICE_UX(0x1435, 0x0828), /* Wistronneweb / AR5523_2 */ | |
| AR5523_DEVICE_UG(0x0cde, 0x0012), /* Zcom / AR5523 */ | |
| AR5523_DEVICE_UG(0x1385, 0x4250), /* Netgear3 / WG111T (2) */ | |
| AR5523_DEVICE_UG(0x1385, 0x5f00), /* Netgear / WPN111 */ | |
| AR5523_DEVICE_UG(0x1385, 0x5f02), /* Netgear / WPN111 */ | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, ar5523_id_table); | |
| static struct usb_driver ar5523_driver = { | |
| .name = "ar5523", | |
| .id_table = ar5523_id_table, | |
| .probe = ar5523_probe, | |
| .disconnect = ar5523_disconnect, | |
| }; | |
| module_usb_driver(ar5523_driver); | |
| MODULE_DESCRIPTION("Atheros AR5523 wireless driver"); | |
| MODULE_LICENSE("Dual BSD/GPL"); | |
| MODULE_FIRMWARE(AR5523_FIRMWARE_FILE); |