| // SPDX-License-Identifier: GPL-2.0-or-later | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/mii.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/cdc.h> | |
| #include <linux/usb/usbnet.h> | |
| #include <linux/usb/r8152.h> | |
| #define OCP_BASE 0xe86c | |
| static int pla_read_word(struct usbnet *dev, u16 index) | |
| { | |
| u16 byen = BYTE_EN_WORD; | |
| u8 shift = index & 2; | |
| __le32 tmp; | |
| int ret; | |
| if (shift) | |
| byen <<= shift; | |
| index &= ~3; | |
| ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index, | |
| MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); | |
| if (ret < 0) | |
| goto out; | |
| ret = __le32_to_cpu(tmp); | |
| ret >>= (shift * 8); | |
| ret &= 0xffff; | |
| out: | |
| return ret; | |
| } | |
| static int pla_write_word(struct usbnet *dev, u16 index, u32 data) | |
| { | |
| u32 mask = 0xffff; | |
| u16 byen = BYTE_EN_WORD; | |
| u8 shift = index & 2; | |
| __le32 tmp; | |
| int ret; | |
| data &= mask; | |
| if (shift) { | |
| byen <<= shift; | |
| mask <<= (shift * 8); | |
| data <<= (shift * 8); | |
| } | |
| index &= ~3; | |
| ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index, | |
| MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); | |
| if (ret < 0) | |
| goto out; | |
| data |= __le32_to_cpu(tmp) & ~mask; | |
| tmp = __cpu_to_le32(data); | |
| ret = usbnet_write_cmd(dev, RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, index, | |
| MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); | |
| out: | |
| return ret; | |
| } | |
| static int r8153_ecm_mdio_read(struct net_device *netdev, int phy_id, int reg) | |
| { | |
| struct usbnet *dev = netdev_priv(netdev); | |
| int ret; | |
| ret = pla_write_word(dev, OCP_BASE, 0xa000); | |
| if (ret < 0) | |
| goto out; | |
| ret = pla_read_word(dev, 0xb400 + reg * 2); | |
| out: | |
| return ret; | |
| } | |
| static void r8153_ecm_mdio_write(struct net_device *netdev, int phy_id, int reg, int val) | |
| { | |
| struct usbnet *dev = netdev_priv(netdev); | |
| int ret; | |
| ret = pla_write_word(dev, OCP_BASE, 0xa000); | |
| if (ret < 0) | |
| return; | |
| ret = pla_write_word(dev, 0xb400 + reg * 2, val); | |
| } | |
| static int r8153_bind(struct usbnet *dev, struct usb_interface *intf) | |
| { | |
| int status; | |
| status = usbnet_cdc_bind(dev, intf); | |
| if (status < 0) | |
| return status; | |
| dev->mii.dev = dev->net; | |
| dev->mii.mdio_read = r8153_ecm_mdio_read; | |
| dev->mii.mdio_write = r8153_ecm_mdio_write; | |
| dev->mii.reg_num_mask = 0x1f; | |
| dev->mii.supports_gmii = 1; | |
| return status; | |
| } | |
| static const struct driver_info r8153_info = { | |
| .description = "RTL8153 ECM Device", | |
| .flags = FLAG_ETHER, | |
| .bind = r8153_bind, | |
| .unbind = usbnet_cdc_unbind, | |
| .status = usbnet_cdc_status, | |
| .manage_power = usbnet_manage_power, | |
| }; | |
| static const struct usb_device_id products[] = { | |
| /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */ | |
| { | |
| USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM, | |
| USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), | |
| .driver_info = (unsigned long)&r8153_info, | |
| }, | |
| /* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */ | |
| { | |
| USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_LENOVO, 0x721e, USB_CLASS_COMM, | |
| USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), | |
| .driver_info = (unsigned long)&r8153_info, | |
| }, | |
| /* Lenovo ThinkPad Hybrid USB-C with USB-A Dock (40af0135eu, based on Realtek RTL8153) */ | |
| { | |
| USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_LENOVO, 0xa359, USB_CLASS_COMM, | |
| USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), | |
| .driver_info = (unsigned long)&r8153_info, | |
| }, | |
| { }, /* END */ | |
| }; | |
| MODULE_DEVICE_TABLE(usb, products); | |
| static int rtl8153_ecm_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| #if IS_REACHABLE(CONFIG_USB_RTL8152) | |
| if (rtl8152_get_version(intf)) | |
| return -ENODEV; | |
| #endif | |
| return usbnet_probe(intf, id); | |
| } | |
| static struct usb_driver r8153_ecm_driver = { | |
| .name = "r8153_ecm", | |
| .id_table = products, | |
| .probe = rtl8153_ecm_probe, | |
| .disconnect = usbnet_disconnect, | |
| .suspend = usbnet_suspend, | |
| .resume = usbnet_resume, | |
| .reset_resume = usbnet_resume, | |
| .supports_autosuspend = 1, | |
| .disable_hub_initiated_lpm = 1, | |
| }; | |
| module_usb_driver(r8153_ecm_driver); | |
| MODULE_AUTHOR("Hayes Wang"); | |
| MODULE_DESCRIPTION("Realtek USB ECM device"); | |
| MODULE_LICENSE("GPL"); |