| // SPDX-License-Identifier: GPL-2.0-only | |
| /**************************************************************************** | |
| * | |
| * Driver for AMD network controllers and boards | |
| * Copyright (C) 2025, Advanced Micro Devices, Inc. | |
| */ | |
| #include <linux/pci.h> | |
| #include <cxl/cxl.h> | |
| #include <cxl/pci.h> | |
| #include "net_driver.h" | |
| #include "efx_cxl.h" | |
| #define EFX_CTPIO_BUFFER_SIZE SZ_256M | |
| int efx_cxl_init(struct efx_probe_data *probe_data) | |
| { | |
| struct efx_nic *efx = &probe_data->efx; | |
| struct pci_dev *pci_dev = efx->pci_dev; | |
| struct range cxl_pio_range; | |
| struct efx_cxl *cxl; | |
| u16 dvsec; | |
| int rc; | |
| /* Is the device configured with and using CXL? */ | |
| if (!pcie_is_cxl(pci_dev)) | |
| return 0; | |
| dvsec = pci_find_dvsec_capability(pci_dev, PCI_VENDOR_ID_CXL, | |
| PCI_DVSEC_CXL_DEVICE); | |
| if (!dvsec) { | |
| pci_info(pci_dev, "CXL_DVSEC_PCIE_DEVICE capability not found\n"); | |
| return 0; | |
| } | |
| pci_dbg(pci_dev, "CXL_DVSEC_PCIE_DEVICE capability found\n"); | |
| /* Create a cxl_dev_state embedded in the cxl struct using cxl core api | |
| * specifying no mbox available. | |
| */ | |
| cxl = devm_cxl_dev_state_create(&pci_dev->dev, CXL_DEVTYPE_DEVMEM, | |
| pci_get_dsn(pci_dev), dvsec, | |
| struct efx_cxl, cxlds, false); | |
| if (!cxl) | |
| return -ENOMEM; | |
| rc = cxl_pci_setup_regs(pci_dev, CXL_REGLOC_RBI_COMPONENT, | |
| &cxl->cxlds.reg_map); | |
| if (rc) { | |
| pci_err(pci_dev, "No component registers\n"); | |
| return rc; | |
| } | |
| if (!cxl->cxlds.reg_map.component_map.hdm_decoder.valid) { | |
| pci_err(pci_dev, "Expected HDM component register not found\n"); | |
| return -ENODEV; | |
| } | |
| if (!cxl->cxlds.reg_map.component_map.ras.valid) { | |
| pci_err(pci_dev, "Expected RAS component register not found\n"); | |
| return -ENODEV; | |
| } | |
| /* Set media ready explicitly as there are neither mailbox for checking | |
| * this state nor the CXL register involved, both not mandatory for | |
| * type2. | |
| */ | |
| cxl->cxlds.media_ready = true; | |
| if (cxl_set_capacity(&cxl->cxlds, EFX_CTPIO_BUFFER_SIZE)) { | |
| pci_err(pci_dev, "dpa capacity setup failed\n"); | |
| return -ENODEV; | |
| } | |
| cxl->cxlmd = devm_cxl_probe_mem(&cxl->cxlds, &cxl_pio_range); | |
| if (IS_ERR(cxl->cxlmd)) { | |
| pci_err(pci_dev, "CXL accel memdev creation failed\n"); | |
| return PTR_ERR(cxl->cxlmd); | |
| } | |
| cxl->ctpio_cxl = ioremap_wc(cxl_pio_range.start, | |
| range_len(&cxl_pio_range)); | |
| if (!cxl->ctpio_cxl) { | |
| pci_err(pci_dev, "CXL ioremap region (%pra) failed\n", | |
| &cxl_pio_range); | |
| return -ENOMEM; | |
| } | |
| probe_data->cxl_pio_initialised = true; | |
| probe_data->cxl = cxl; | |
| return 0; | |
| } | |
| void efx_cxl_exit(struct efx_probe_data *probe_data) | |
| { | |
| if (!probe_data->cxl) | |
| return; | |
| iounmap(probe_data->cxl->ctpio_cxl); | |
| } | |
| MODULE_IMPORT_NS("CXL"); |