| // SPDX-License-Identifier: GPL-2.0 | |
| /* Copyright(c) 1999 - 2018 Intel Corporation. */ | |
| #include "e1000.h" | |
| /** | |
| * e1000_calculate_checksum - Calculate checksum for buffer | |
| * @buffer: pointer to EEPROM | |
| * @length: size of EEPROM to calculate a checksum for | |
| * | |
| * Calculates the checksum for some buffer on a specified length. The | |
| * checksum calculated is returned. | |
| **/ | |
| static u8 e1000_calculate_checksum(u8 *buffer, u32 length) | |
| { | |
| u32 i; | |
| u8 sum = 0; | |
| if (!buffer) | |
| return 0; | |
| for (i = 0; i < length; i++) | |
| sum += buffer[i]; | |
| return (u8)(0 - sum); | |
| } | |
| /** | |
| * e1000_mng_enable_host_if - Checks host interface is enabled | |
| * @hw: pointer to the HW structure | |
| * | |
| * Returns 0 upon success, else -E1000_ERR_HOST_INTERFACE_COMMAND | |
| * | |
| * This function checks whether the HOST IF is enabled for command operation | |
| * and also checks whether the previous command is completed. It busy waits | |
| * in case of previous command is not completed. | |
| **/ | |
| static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) | |
| { | |
| u32 hicr; | |
| u8 i; | |
| if (!hw->mac.arc_subsystem_valid) { | |
| e_dbg("ARC subsystem not valid.\n"); | |
| return -E1000_ERR_HOST_INTERFACE_COMMAND; | |
| } | |
| /* Check that the host interface is enabled. */ | |
| hicr = er32(HICR); | |
| if (!(hicr & E1000_HICR_EN)) { | |
| e_dbg("E1000_HOST_EN bit disabled.\n"); | |
| return -E1000_ERR_HOST_INTERFACE_COMMAND; | |
| } | |
| /* check the previous command is completed */ | |
| for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { | |
| hicr = er32(HICR); | |
| if (!(hicr & E1000_HICR_C)) | |
| break; | |
| mdelay(1); | |
| } | |
| if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { | |
| e_dbg("Previous command timeout failed.\n"); | |
| return -E1000_ERR_HOST_INTERFACE_COMMAND; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * e1000e_check_mng_mode_generic - Generic check management mode | |
| * @hw: pointer to the HW structure | |
| * | |
| * Reads the firmware semaphore register and returns true (>0) if | |
| * manageability is enabled, else false (0). | |
| **/ | |
| bool e1000e_check_mng_mode_generic(struct e1000_hw *hw) | |
| { | |
| u32 fwsm = er32(FWSM); | |
| return (fwsm & E1000_FWSM_MODE_MASK) == | |
| (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); | |
| } | |
| /** | |
| * e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx | |
| * @hw: pointer to the HW structure | |
| * | |
| * Enables packet filtering on transmit packets if manageability is enabled | |
| * and host interface is enabled. | |
| **/ | |
| bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) | |
| { | |
| struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; | |
| u32 *buffer = (u32 *)&hw->mng_cookie; | |
| u32 offset; | |
| s32 ret_val, hdr_csum, csum; | |
| u8 i, len; | |
| hw->mac.tx_pkt_filtering = true; | |
| /* No manageability, no filtering */ | |
| if (!hw->mac.ops.check_mng_mode(hw)) { | |
| hw->mac.tx_pkt_filtering = false; | |
| return hw->mac.tx_pkt_filtering; | |
| } | |
| /* If we can't read from the host interface for whatever | |
| * reason, disable filtering. | |
| */ | |
| ret_val = e1000_mng_enable_host_if(hw); | |
| if (ret_val) { | |
| hw->mac.tx_pkt_filtering = false; | |
| return hw->mac.tx_pkt_filtering; | |
| } | |
| /* Read in the header. Length and offset are in dwords. */ | |
| len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; | |
| offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; | |
| for (i = 0; i < len; i++) | |
| *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, | |
| offset + i); | |
| hdr_csum = hdr->checksum; | |
| hdr->checksum = 0; | |
| csum = e1000_calculate_checksum((u8 *)hdr, | |
| E1000_MNG_DHCP_COOKIE_LENGTH); | |
| /* If either the checksums or signature don't match, then | |
| * the cookie area isn't considered valid, in which case we | |
| * take the safe route of assuming Tx filtering is enabled. | |
| */ | |
| if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { | |
| hw->mac.tx_pkt_filtering = true; | |
| return hw->mac.tx_pkt_filtering; | |
| } | |
| /* Cookie area is valid, make the final check for filtering. */ | |
| if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) | |
| hw->mac.tx_pkt_filtering = false; | |
| return hw->mac.tx_pkt_filtering; | |
| } | |
| /** | |
| * e1000_mng_write_cmd_header - Writes manageability command header | |
| * @hw: pointer to the HW structure | |
| * @hdr: pointer to the host interface command header | |
| * | |
| * Writes the command header after does the checksum calculation. | |
| **/ | |
| static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, | |
| struct e1000_host_mng_command_header *hdr) | |
| { | |
| u16 i, length = sizeof(struct e1000_host_mng_command_header); | |
| /* Write the whole command header structure with new checksum. */ | |
| hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); | |
| length >>= 2; | |
| /* Write the relevant command block into the ram area. */ | |
| for (i = 0; i < length; i++) { | |
| E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i, *((u32 *)hdr + i)); | |
| e1e_flush(); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * e1000_mng_host_if_write - Write to the manageability host interface | |
| * @hw: pointer to the HW structure | |
| * @buffer: pointer to the host interface buffer | |
| * @length: size of the buffer | |
| * @offset: location in the buffer to write to | |
| * @sum: sum of the data (not checksum) | |
| * | |
| * This function writes the buffer content at the offset given on the host if. | |
| * It also does alignment considerations to do the writes in most efficient | |
| * way. Also fills up the sum of the buffer in *buffer parameter. | |
| **/ | |
| static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, | |
| u16 length, u16 offset, u8 *sum) | |
| { | |
| u8 *tmp; | |
| u8 *bufptr = buffer; | |
| u32 data = 0; | |
| u16 remaining, i, j, prev_bytes; | |
| /* sum = only sum of the data and it is not checksum */ | |
| if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) | |
| return -E1000_ERR_PARAM; | |
| tmp = (u8 *)&data; | |
| prev_bytes = offset & 0x3; | |
| offset >>= 2; | |
| if (prev_bytes) { | |
| data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset); | |
| for (j = prev_bytes; j < sizeof(u32); j++) { | |
| *(tmp + j) = *bufptr++; | |
| *sum += *(tmp + j); | |
| } | |
| E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data); | |
| length -= j - prev_bytes; | |
| offset++; | |
| } | |
| remaining = length & 0x3; | |
| length -= remaining; | |
| /* Calculate length in DWORDs */ | |
| length >>= 2; | |
| /* The device driver writes the relevant command block into the | |
| * ram area. | |
| */ | |
| for (i = 0; i < length; i++) { | |
| for (j = 0; j < sizeof(u32); j++) { | |
| *(tmp + j) = *bufptr++; | |
| *sum += *(tmp + j); | |
| } | |
| E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); | |
| } | |
| if (remaining) { | |
| for (j = 0; j < sizeof(u32); j++) { | |
| if (j < remaining) | |
| *(tmp + j) = *bufptr++; | |
| else | |
| *(tmp + j) = 0; | |
| *sum += *(tmp + j); | |
| } | |
| E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface | |
| * @hw: pointer to the HW structure | |
| * @buffer: pointer to the host interface | |
| * @length: size of the buffer | |
| * | |
| * Writes the DHCP information to the host interface. | |
| **/ | |
| s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) | |
| { | |
| struct e1000_host_mng_command_header hdr; | |
| s32 ret_val; | |
| u32 hicr; | |
| hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; | |
| hdr.command_length = length; | |
| hdr.reserved1 = 0; | |
| hdr.reserved2 = 0; | |
| hdr.checksum = 0; | |
| /* Enable the host interface */ | |
| ret_val = e1000_mng_enable_host_if(hw); | |
| if (ret_val) | |
| return ret_val; | |
| /* Populate the host interface with the contents of "buffer". */ | |
| ret_val = e1000_mng_host_if_write(hw, buffer, length, | |
| sizeof(hdr), &(hdr.checksum)); | |
| if (ret_val) | |
| return ret_val; | |
| /* Write the manageability command header */ | |
| ret_val = e1000_mng_write_cmd_header(hw, &hdr); | |
| if (ret_val) | |
| return ret_val; | |
| /* Tell the ARC a new command is pending. */ | |
| hicr = er32(HICR); | |
| ew32(HICR, hicr | E1000_HICR_C); | |
| return 0; | |
| } | |
| /** | |
| * e1000e_enable_mng_pass_thru - Check if management passthrough is needed | |
| * @hw: pointer to the HW structure | |
| * | |
| * Verifies the hardware needs to leave interface enabled so that frames can | |
| * be directed to and from the management interface. | |
| **/ | |
| bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw) | |
| { | |
| u32 manc; | |
| u32 fwsm, factps; | |
| manc = er32(MANC); | |
| if (!(manc & E1000_MANC_RCV_TCO_EN)) | |
| return false; | |
| if (hw->mac.has_fwsm) { | |
| fwsm = er32(FWSM); | |
| factps = er32(FACTPS); | |
| if (!(factps & E1000_FACTPS_MNGCG) && | |
| ((fwsm & E1000_FWSM_MODE_MASK) == | |
| (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) | |
| return true; | |
| } else if ((hw->mac.type == e1000_82574) || | |
| (hw->mac.type == e1000_82583)) { | |
| u16 data; | |
| s32 ret_val; | |
| factps = er32(FACTPS); | |
| ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data); | |
| if (ret_val) | |
| return false; | |
| if (!(factps & E1000_FACTPS_MNGCG) && | |
| ((data & E1000_NVM_INIT_CTRL2_MNGM) == | |
| (e1000_mng_mode_pt << 13))) | |
| return true; | |
| } else if ((manc & E1000_MANC_SMBUS_EN) && | |
| !(manc & E1000_MANC_ASF_EN)) { | |
| return true; | |
| } | |
| return false; | |
| } |