| // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) | |
| /* | |
| * Copyright (c) 2014-2025, Advanced Micro Devices, Inc. | |
| * Copyright (c) 2014, Synopsys, Inc. | |
| * All rights reserved | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kmod.h> | |
| #include <linux/delay.h> | |
| #include <linux/completion.h> | |
| #include <linux/mutex.h> | |
| #include "xgbe.h" | |
| #include "xgbe-common.h" | |
| #define XGBE_ABORT_COUNT 500 | |
| #define XGBE_DISABLE_COUNT 1000 | |
| #define XGBE_STD_SPEED 1 | |
| #define XGBE_INTR_RX_FULL BIT(IC_RAW_INTR_STAT_RX_FULL_INDEX) | |
| #define XGBE_INTR_TX_EMPTY BIT(IC_RAW_INTR_STAT_TX_EMPTY_INDEX) | |
| #define XGBE_INTR_TX_ABRT BIT(IC_RAW_INTR_STAT_TX_ABRT_INDEX) | |
| #define XGBE_INTR_STOP_DET BIT(IC_RAW_INTR_STAT_STOP_DET_INDEX) | |
| #define XGBE_DEFAULT_INT_MASK (XGBE_INTR_RX_FULL | \ | |
| XGBE_INTR_TX_EMPTY | \ | |
| XGBE_INTR_TX_ABRT | \ | |
| XGBE_INTR_STOP_DET) | |
| #define XGBE_I2C_READ BIT(8) | |
| #define XGBE_I2C_STOP BIT(9) | |
| static int xgbe_i2c_abort(struct xgbe_prv_data *pdata) | |
| { | |
| unsigned int wait = XGBE_ABORT_COUNT; | |
| /* Must be enabled to recognize the abort request */ | |
| XI2C_IOWRITE_BITS(pdata, IC_ENABLE, EN, 1); | |
| /* Issue the abort */ | |
| XI2C_IOWRITE_BITS(pdata, IC_ENABLE, ABORT, 1); | |
| while (wait--) { | |
| if (!XI2C_IOREAD_BITS(pdata, IC_ENABLE, ABORT)) | |
| return 0; | |
| usleep_range(500, 600); | |
| } | |
| return -EBUSY; | |
| } | |
| static int xgbe_i2c_set_enable(struct xgbe_prv_data *pdata, bool enable) | |
| { | |
| unsigned int wait = XGBE_DISABLE_COUNT; | |
| unsigned int mode = enable ? 1 : 0; | |
| while (wait--) { | |
| XI2C_IOWRITE_BITS(pdata, IC_ENABLE, EN, mode); | |
| if (XI2C_IOREAD_BITS(pdata, IC_ENABLE_STATUS, EN) == mode) | |
| return 0; | |
| usleep_range(100, 110); | |
| } | |
| return -EBUSY; | |
| } | |
| static int xgbe_i2c_disable(struct xgbe_prv_data *pdata) | |
| { | |
| int ret; | |
| ret = xgbe_i2c_set_enable(pdata, false); | |
| if (ret) { | |
| /* Disable failed, try an abort */ | |
| ret = xgbe_i2c_abort(pdata); | |
| if (ret) | |
| return ret; | |
| /* Abort succeeded, try to disable again */ | |
| ret = xgbe_i2c_set_enable(pdata, false); | |
| } | |
| return ret; | |
| } | |
| static int xgbe_i2c_enable(struct xgbe_prv_data *pdata) | |
| { | |
| return xgbe_i2c_set_enable(pdata, true); | |
| } | |
| static void xgbe_i2c_clear_all_interrupts(struct xgbe_prv_data *pdata) | |
| { | |
| XI2C_IOREAD(pdata, IC_CLR_INTR); | |
| } | |
| static void xgbe_i2c_disable_interrupts(struct xgbe_prv_data *pdata) | |
| { | |
| XI2C_IOWRITE(pdata, IC_INTR_MASK, 0); | |
| } | |
| static void xgbe_i2c_enable_interrupts(struct xgbe_prv_data *pdata) | |
| { | |
| XI2C_IOWRITE(pdata, IC_INTR_MASK, XGBE_DEFAULT_INT_MASK); | |
| } | |
| static void xgbe_i2c_write(struct xgbe_prv_data *pdata) | |
| { | |
| struct xgbe_i2c_op_state *state = &pdata->i2c.op_state; | |
| unsigned int tx_slots; | |
| unsigned int cmd; | |
| /* Configured to never receive Rx overflows, so fill up Tx fifo */ | |
| tx_slots = pdata->i2c.tx_fifo_size - XI2C_IOREAD(pdata, IC_TXFLR); | |
| while (tx_slots && state->tx_len) { | |
| if (state->op->cmd == XGBE_I2C_CMD_READ) | |
| cmd = XGBE_I2C_READ; | |
| else | |
| cmd = *state->tx_buf++; | |
| if (state->tx_len == 1) | |
| XI2C_SET_BITS(cmd, IC_DATA_CMD, STOP, 1); | |
| XI2C_IOWRITE(pdata, IC_DATA_CMD, cmd); | |
| tx_slots--; | |
| state->tx_len--; | |
| } | |
| /* No more Tx operations, so ignore TX_EMPTY and return */ | |
| if (!state->tx_len) | |
| XI2C_IOWRITE_BITS(pdata, IC_INTR_MASK, TX_EMPTY, 0); | |
| } | |
| static void xgbe_i2c_read(struct xgbe_prv_data *pdata) | |
| { | |
| struct xgbe_i2c_op_state *state = &pdata->i2c.op_state; | |
| unsigned int rx_slots; | |
| /* Anything to be read? */ | |
| if (state->op->cmd != XGBE_I2C_CMD_READ) | |
| return; | |
| rx_slots = XI2C_IOREAD(pdata, IC_RXFLR); | |
| while (rx_slots && state->rx_len) { | |
| *state->rx_buf++ = XI2C_IOREAD(pdata, IC_DATA_CMD); | |
| state->rx_len--; | |
| rx_slots--; | |
| } | |
| } | |
| static void xgbe_i2c_clear_isr_interrupts(struct xgbe_prv_data *pdata, | |
| unsigned int isr) | |
| { | |
| struct xgbe_i2c_op_state *state = &pdata->i2c.op_state; | |
| if (isr & XGBE_INTR_TX_ABRT) { | |
| state->tx_abort_source = XI2C_IOREAD(pdata, IC_TX_ABRT_SOURCE); | |
| XI2C_IOREAD(pdata, IC_CLR_TX_ABRT); | |
| } | |
| if (isr & XGBE_INTR_STOP_DET) | |
| XI2C_IOREAD(pdata, IC_CLR_STOP_DET); | |
| } | |
| static void xgbe_i2c_isr_bh_work(struct work_struct *work) | |
| { | |
| struct xgbe_prv_data *pdata = from_work(pdata, work, i2c_bh_work); | |
| struct xgbe_i2c_op_state *state = &pdata->i2c.op_state; | |
| unsigned int isr; | |
| isr = XI2C_IOREAD(pdata, IC_RAW_INTR_STAT); | |
| if (!isr) | |
| goto reissue_check; | |
| netif_dbg(pdata, intr, pdata->netdev, | |
| "I2C interrupt received: status=%#010x\n", isr); | |
| xgbe_i2c_clear_isr_interrupts(pdata, isr); | |
| if (isr & XGBE_INTR_TX_ABRT) { | |
| netif_dbg(pdata, link, pdata->netdev, | |
| "I2C TX_ABRT received (%#010x) for target %#04x\n", | |
| state->tx_abort_source, state->op->target); | |
| xgbe_i2c_disable_interrupts(pdata); | |
| state->ret = -EIO; | |
| goto out; | |
| } | |
| /* Check for data in the Rx fifo */ | |
| xgbe_i2c_read(pdata); | |
| /* Fill up the Tx fifo next */ | |
| xgbe_i2c_write(pdata); | |
| out: | |
| /* Complete on an error or STOP condition */ | |
| if (state->ret || XI2C_GET_BITS(isr, IC_RAW_INTR_STAT, STOP_DET)) | |
| complete(&pdata->i2c_complete); | |
| reissue_check: | |
| /* Reissue interrupt if status is not clear */ | |
| if (pdata->vdata->irq_reissue_support) | |
| XP_IOWRITE(pdata, XP_INT_REISSUE_EN, 1 << 2); | |
| } | |
| static irqreturn_t xgbe_i2c_isr(int irq, void *data) | |
| { | |
| struct xgbe_prv_data *pdata = (struct xgbe_prv_data *)data; | |
| if (pdata->isr_as_bh_work) | |
| queue_work(system_bh_wq, &pdata->i2c_bh_work); | |
| else | |
| xgbe_i2c_isr_bh_work(&pdata->i2c_bh_work); | |
| return IRQ_HANDLED; | |
| } | |
| static void xgbe_i2c_set_mode(struct xgbe_prv_data *pdata) | |
| { | |
| unsigned int reg; | |
| reg = XI2C_IOREAD(pdata, IC_CON); | |
| XI2C_SET_BITS(reg, IC_CON, MASTER_MODE, 1); | |
| XI2C_SET_BITS(reg, IC_CON, SLAVE_DISABLE, 1); | |
| XI2C_SET_BITS(reg, IC_CON, RESTART_EN, 1); | |
| XI2C_SET_BITS(reg, IC_CON, SPEED, XGBE_STD_SPEED); | |
| XI2C_SET_BITS(reg, IC_CON, RX_FIFO_FULL_HOLD, 1); | |
| XI2C_IOWRITE(pdata, IC_CON, reg); | |
| } | |
| static void xgbe_i2c_get_features(struct xgbe_prv_data *pdata) | |
| { | |
| struct xgbe_i2c *i2c = &pdata->i2c; | |
| unsigned int reg; | |
| reg = XI2C_IOREAD(pdata, IC_COMP_PARAM_1); | |
| i2c->max_speed_mode = XI2C_GET_BITS(reg, IC_COMP_PARAM_1, | |
| MAX_SPEED_MODE); | |
| i2c->rx_fifo_size = XI2C_GET_BITS(reg, IC_COMP_PARAM_1, | |
| RX_BUFFER_DEPTH); | |
| i2c->tx_fifo_size = XI2C_GET_BITS(reg, IC_COMP_PARAM_1, | |
| TX_BUFFER_DEPTH); | |
| if (netif_msg_probe(pdata)) | |
| dev_dbg(pdata->dev, "I2C features: %s=%u, %s=%u, %s=%u\n", | |
| "MAX_SPEED_MODE", i2c->max_speed_mode, | |
| "RX_BUFFER_DEPTH", i2c->rx_fifo_size, | |
| "TX_BUFFER_DEPTH", i2c->tx_fifo_size); | |
| } | |
| static void xgbe_i2c_set_target(struct xgbe_prv_data *pdata, unsigned int addr) | |
| { | |
| XI2C_IOWRITE(pdata, IC_TAR, addr); | |
| } | |
| static irqreturn_t xgbe_i2c_combined_isr(struct xgbe_prv_data *pdata) | |
| { | |
| xgbe_i2c_isr_bh_work(&pdata->i2c_bh_work); | |
| return IRQ_HANDLED; | |
| } | |
| static int xgbe_i2c_xfer(struct xgbe_prv_data *pdata, struct xgbe_i2c_op *op) | |
| { | |
| struct xgbe_i2c_op_state *state = &pdata->i2c.op_state; | |
| int ret; | |
| mutex_lock(&pdata->i2c_mutex); | |
| reinit_completion(&pdata->i2c_complete); | |
| ret = xgbe_i2c_disable(pdata); | |
| if (ret) { | |
| netdev_err(pdata->netdev, "failed to disable i2c master\n"); | |
| goto unlock; | |
| } | |
| xgbe_i2c_set_target(pdata, op->target); | |
| memset(state, 0, sizeof(*state)); | |
| state->op = op; | |
| state->tx_len = op->len; | |
| state->tx_buf = op->buf; | |
| state->rx_len = op->len; | |
| state->rx_buf = op->buf; | |
| xgbe_i2c_clear_all_interrupts(pdata); | |
| ret = xgbe_i2c_enable(pdata); | |
| if (ret) { | |
| netdev_err(pdata->netdev, "failed to enable i2c master\n"); | |
| goto unlock; | |
| } | |
| /* Enabling the interrupts will cause the TX FIFO empty interrupt to | |
| * fire and begin to process the command via the ISR. | |
| */ | |
| xgbe_i2c_enable_interrupts(pdata); | |
| if (!wait_for_completion_timeout(&pdata->i2c_complete, HZ)) { | |
| netdev_err(pdata->netdev, "i2c operation timed out\n"); | |
| ret = -ETIMEDOUT; | |
| goto disable; | |
| } | |
| ret = state->ret; | |
| if (ret) { | |
| if (state->tx_abort_source & IC_TX_ABRT_7B_ADDR_NOACK) | |
| ret = -ENOTCONN; | |
| else if (state->tx_abort_source & IC_TX_ABRT_ARB_LOST) | |
| ret = -EAGAIN; | |
| } | |
| disable: | |
| xgbe_i2c_disable_interrupts(pdata); | |
| xgbe_i2c_disable(pdata); | |
| unlock: | |
| mutex_unlock(&pdata->i2c_mutex); | |
| return ret; | |
| } | |
| static void xgbe_i2c_stop(struct xgbe_prv_data *pdata) | |
| { | |
| if (!pdata->i2c.started) | |
| return; | |
| netif_dbg(pdata, link, pdata->netdev, "stopping I2C\n"); | |
| pdata->i2c.started = 0; | |
| xgbe_i2c_disable_interrupts(pdata); | |
| xgbe_i2c_disable(pdata); | |
| xgbe_i2c_clear_all_interrupts(pdata); | |
| if (pdata->dev_irq != pdata->i2c_irq) { | |
| devm_free_irq(pdata->dev, pdata->i2c_irq, pdata); | |
| cancel_work_sync(&pdata->i2c_bh_work); | |
| } | |
| } | |
| static int xgbe_i2c_start(struct xgbe_prv_data *pdata) | |
| { | |
| int ret; | |
| if (pdata->i2c.started) | |
| return 0; | |
| netif_dbg(pdata, link, pdata->netdev, "starting I2C\n"); | |
| /* If we have a separate I2C irq, enable it */ | |
| if (pdata->dev_irq != pdata->i2c_irq) { | |
| INIT_WORK(&pdata->i2c_bh_work, xgbe_i2c_isr_bh_work); | |
| ret = devm_request_irq(pdata->dev, pdata->i2c_irq, | |
| xgbe_i2c_isr, 0, pdata->i2c_name, | |
| pdata); | |
| if (ret) { | |
| netdev_err(pdata->netdev, "i2c irq request failed\n"); | |
| return ret; | |
| } | |
| } | |
| pdata->i2c.started = 1; | |
| return 0; | |
| } | |
| static int xgbe_i2c_init(struct xgbe_prv_data *pdata) | |
| { | |
| int ret; | |
| xgbe_i2c_disable_interrupts(pdata); | |
| ret = xgbe_i2c_disable(pdata); | |
| if (ret) { | |
| dev_err(pdata->dev, "failed to disable i2c master\n"); | |
| return ret; | |
| } | |
| xgbe_i2c_get_features(pdata); | |
| xgbe_i2c_set_mode(pdata); | |
| xgbe_i2c_clear_all_interrupts(pdata); | |
| return 0; | |
| } | |
| void xgbe_init_function_ptrs_i2c(struct xgbe_i2c_if *i2c_if) | |
| { | |
| i2c_if->i2c_init = xgbe_i2c_init; | |
| i2c_if->i2c_start = xgbe_i2c_start; | |
| i2c_if->i2c_stop = xgbe_i2c_stop; | |
| i2c_if->i2c_xfer = xgbe_i2c_xfer; | |
| i2c_if->i2c_isr = xgbe_i2c_combined_isr; | |
| } |