| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips | |
| * Copyright (c) 2008-2009 Marvell Semiconductor | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/phy.h> | |
| #include <net/dsa.h> | |
| #include "mv88e6060.h" | |
| static int reg_read(struct mv88e6060_priv *priv, int addr, int reg) | |
| { | |
| return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg); | |
| } | |
| static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val) | |
| { | |
| return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val); | |
| } | |
| static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr) | |
| { | |
| int ret; | |
| ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID); | |
| if (ret >= 0) { | |
| if (ret == PORT_SWITCH_ID_6060) | |
| return "Marvell 88E6060 (A0)"; | |
| if (ret == PORT_SWITCH_ID_6060_R1 || | |
| ret == PORT_SWITCH_ID_6060_R2) | |
| return "Marvell 88E6060 (B0)"; | |
| if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060) | |
| return "Marvell 88E6060"; | |
| } | |
| return NULL; | |
| } | |
| static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds, | |
| int port, | |
| enum dsa_tag_protocol m) | |
| { | |
| return DSA_TAG_PROTO_TRAILER; | |
| } | |
| static int mv88e6060_switch_reset(struct mv88e6060_priv *priv) | |
| { | |
| int i; | |
| int ret; | |
| unsigned long timeout; | |
| /* Set all ports to the disabled state. */ | |
| for (i = 0; i < MV88E6060_PORTS; i++) { | |
| ret = reg_read(priv, REG_PORT(i), PORT_CONTROL); | |
| if (ret < 0) | |
| return ret; | |
| ret = reg_write(priv, REG_PORT(i), PORT_CONTROL, | |
| ret & ~PORT_CONTROL_STATE_MASK); | |
| if (ret) | |
| return ret; | |
| } | |
| /* Wait for transmit queues to drain. */ | |
| usleep_range(2000, 4000); | |
| /* Reset the switch. */ | |
| ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL, | |
| GLOBAL_ATU_CONTROL_SWRESET | | |
| GLOBAL_ATU_CONTROL_LEARNDIS); | |
| if (ret) | |
| return ret; | |
| /* Wait up to one second for reset to complete. */ | |
| timeout = jiffies + 1 * HZ; | |
| while (time_before(jiffies, timeout)) { | |
| ret = reg_read(priv, REG_GLOBAL, GLOBAL_STATUS); | |
| if (ret < 0) | |
| return ret; | |
| if (ret & GLOBAL_STATUS_INIT_READY) | |
| break; | |
| usleep_range(1000, 2000); | |
| } | |
| if (time_after(jiffies, timeout)) | |
| return -ETIMEDOUT; | |
| return 0; | |
| } | |
| static int mv88e6060_setup_global(struct mv88e6060_priv *priv) | |
| { | |
| int ret; | |
| /* Disable discarding of frames with excessive collisions, | |
| * set the maximum frame size to 1536 bytes, and mask all | |
| * interrupt sources. | |
| */ | |
| ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL, | |
| GLOBAL_CONTROL_MAX_FRAME_1536); | |
| if (ret) | |
| return ret; | |
| /* Disable automatic address learning. | |
| */ | |
| return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL, | |
| GLOBAL_ATU_CONTROL_LEARNDIS); | |
| } | |
| static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p) | |
| { | |
| int addr = REG_PORT(p); | |
| int ret; | |
| if (dsa_is_unused_port(priv->ds, p)) | |
| return 0; | |
| /* Do not force flow control, disable Ingress and Egress | |
| * Header tagging, disable VLAN tunneling, and set the port | |
| * state to Forwarding. Additionally, if this is the CPU | |
| * port, enable Ingress and Egress Trailer tagging mode. | |
| */ | |
| ret = reg_write(priv, addr, PORT_CONTROL, | |
| dsa_is_cpu_port(priv->ds, p) ? | |
| PORT_CONTROL_TRAILER | | |
| PORT_CONTROL_INGRESS_MODE | | |
| PORT_CONTROL_STATE_FORWARDING : | |
| PORT_CONTROL_STATE_FORWARDING); | |
| if (ret) | |
| return ret; | |
| /* Port based VLAN map: give each port its own address | |
| * database, allow the CPU port to talk to each of the 'real' | |
| * ports, and allow each of the 'real' ports to only talk to | |
| * the CPU port. | |
| */ | |
| ret = reg_write(priv, addr, PORT_VLAN_MAP, | |
| ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) | | |
| (dsa_is_cpu_port(priv->ds, p) ? | |
| dsa_user_ports(priv->ds) : | |
| BIT(dsa_to_port(priv->ds, p)->cpu_dp->index))); | |
| if (ret) | |
| return ret; | |
| /* Port Association Vector: when learning source addresses | |
| * of packets, add the address to the address database using | |
| * a port bitmap that has only the bit for this port set and | |
| * the other bits clear. | |
| */ | |
| return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p)); | |
| } | |
| static int mv88e6060_setup_addr(struct mv88e6060_priv *priv) | |
| { | |
| u8 addr[ETH_ALEN]; | |
| int ret; | |
| u16 val; | |
| eth_random_addr(addr); | |
| val = addr[0] << 8 | addr[1]; | |
| /* The multicast bit is always transmitted as a zero, so the switch uses | |
| * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA. | |
| */ | |
| val &= 0xfeff; | |
| ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val); | |
| if (ret) | |
| return ret; | |
| ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23, | |
| (addr[2] << 8) | addr[3]); | |
| if (ret) | |
| return ret; | |
| return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45, | |
| (addr[4] << 8) | addr[5]); | |
| } | |
| static int mv88e6060_setup(struct dsa_switch *ds) | |
| { | |
| struct mv88e6060_priv *priv = ds->priv; | |
| int ret; | |
| int i; | |
| priv->ds = ds; | |
| ret = mv88e6060_switch_reset(priv); | |
| if (ret < 0) | |
| return ret; | |
| /* @@@ initialise atu */ | |
| ret = mv88e6060_setup_global(priv); | |
| if (ret < 0) | |
| return ret; | |
| ret = mv88e6060_setup_addr(priv); | |
| if (ret < 0) | |
| return ret; | |
| for (i = 0; i < MV88E6060_PORTS; i++) { | |
| ret = mv88e6060_setup_port(priv, i); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int mv88e6060_port_to_phy_addr(int port) | |
| { | |
| if (port >= 0 && port < MV88E6060_PORTS) | |
| return port; | |
| return -1; | |
| } | |
| static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum) | |
| { | |
| struct mv88e6060_priv *priv = ds->priv; | |
| int addr; | |
| addr = mv88e6060_port_to_phy_addr(port); | |
| if (addr == -1) | |
| return 0xffff; | |
| return reg_read(priv, addr, regnum); | |
| } | |
| static int | |
| mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) | |
| { | |
| struct mv88e6060_priv *priv = ds->priv; | |
| int addr; | |
| addr = mv88e6060_port_to_phy_addr(port); | |
| if (addr == -1) | |
| return 0xffff; | |
| return reg_write(priv, addr, regnum, val); | |
| } | |
| static void mv88e6060_phylink_get_caps(struct dsa_switch *ds, int port, | |
| struct phylink_config *config) | |
| { | |
| unsigned long *interfaces = config->supported_interfaces; | |
| struct mv88e6060_priv *priv = ds->priv; | |
| int addr = REG_PORT(port); | |
| int ret; | |
| ret = reg_read(priv, addr, PORT_STATUS); | |
| if (ret < 0) { | |
| dev_err(ds->dev, | |
| "port %d: unable to read status register: %pe\n", | |
| port, ERR_PTR(ret)); | |
| return; | |
| } | |
| /* If the port is configured in SNI mode (acts as a 10Mbps PHY), | |
| * it should have phy-mode = "sni", but that doesn't yet exist, so | |
| * forcibly fail validation until the need arises to introduce it. | |
| */ | |
| if (!(ret & PORT_STATUS_PORTMODE)) { | |
| dev_warn(ds->dev, "port %d: SNI mode not supported\n", port); | |
| return; | |
| } | |
| config->mac_capabilities = MAC_100 | MAC_10 | MAC_SYM_PAUSE; | |
| if (port >= 4) { | |
| /* Ports 4 and 5 can support MII, REVMII and REVRMII modes */ | |
| __set_bit(PHY_INTERFACE_MODE_MII, interfaces); | |
| __set_bit(PHY_INTERFACE_MODE_REVMII, interfaces); | |
| __set_bit(PHY_INTERFACE_MODE_REVRMII, interfaces); | |
| } | |
| if (port <= 4) { | |
| /* Ports 0 to 3 have internal PHYs, and port 4 can optionally | |
| * use an internal PHY. | |
| */ | |
| /* Internal PHY */ | |
| __set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces); | |
| /* Default phylib interface mode */ | |
| __set_bit(PHY_INTERFACE_MODE_GMII, interfaces); | |
| } | |
| } | |
| static const struct dsa_switch_ops mv88e6060_switch_ops = { | |
| .get_tag_protocol = mv88e6060_get_tag_protocol, | |
| .setup = mv88e6060_setup, | |
| .phy_read = mv88e6060_phy_read, | |
| .phy_write = mv88e6060_phy_write, | |
| .phylink_get_caps = mv88e6060_phylink_get_caps, | |
| .port_hsr_join = dsa_port_simple_hsr_join, | |
| .port_hsr_leave = dsa_port_simple_hsr_leave, | |
| }; | |
| static int mv88e6060_probe(struct mdio_device *mdiodev) | |
| { | |
| struct device *dev = &mdiodev->dev; | |
| struct mv88e6060_priv *priv; | |
| struct dsa_switch *ds; | |
| const char *name; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->bus = mdiodev->bus; | |
| priv->sw_addr = mdiodev->addr; | |
| name = mv88e6060_get_name(priv->bus, priv->sw_addr); | |
| if (!name) | |
| return -ENODEV; | |
| dev_info(dev, "switch %s detected\n", name); | |
| ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL); | |
| if (!ds) | |
| return -ENOMEM; | |
| ds->dev = dev; | |
| ds->num_ports = MV88E6060_PORTS; | |
| ds->priv = priv; | |
| ds->dev = dev; | |
| ds->ops = &mv88e6060_switch_ops; | |
| dev_set_drvdata(dev, ds); | |
| return dsa_register_switch(ds); | |
| } | |
| static void mv88e6060_remove(struct mdio_device *mdiodev) | |
| { | |
| struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); | |
| if (!ds) | |
| return; | |
| dsa_unregister_switch(ds); | |
| } | |
| static void mv88e6060_shutdown(struct mdio_device *mdiodev) | |
| { | |
| struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); | |
| if (!ds) | |
| return; | |
| dsa_switch_shutdown(ds); | |
| dev_set_drvdata(&mdiodev->dev, NULL); | |
| } | |
| static const struct of_device_id mv88e6060_of_match[] = { | |
| { | |
| .compatible = "marvell,mv88e6060", | |
| }, | |
| { /* sentinel */ }, | |
| }; | |
| static struct mdio_driver mv88e6060_driver = { | |
| .probe = mv88e6060_probe, | |
| .remove = mv88e6060_remove, | |
| .shutdown = mv88e6060_shutdown, | |
| .mdiodrv.driver = { | |
| .name = "mv88e6060", | |
| .of_match_table = mv88e6060_of_match, | |
| }, | |
| }; | |
| mdio_module_driver(mv88e6060_driver); | |
| MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); | |
| MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:mv88e6060"); |