drivers/net/can/dev/calc_bittiming.c

// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
 * Copyright (C) 2006 Andrey Volkov, Varma Electronics
 * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
 * Copyright (C) 2021-2025 Vincent Mailhol <mailhol@kernel.org>
 */

#include <linux/units.h>
#include <linux/can/dev.h>

#define CAN_CALC_MAX_ERROR 500 /* max error 5% */

/* CiA recommended sample points for Non Return to Zero encoding. */
static int can_calc_sample_point_nrz(const struct can_bittiming *bt)
{
	if (bt->bitrate > 800 * KILO /* BPS */)
		return 750;

	if (bt->bitrate > 500 * KILO /* BPS */)
		return 800;

	return 875;
}

/* Sample points for Pulse-Width Modulation encoding. */
static int can_calc_sample_point_pwm(const struct can_bittiming *bt)
{
	if (bt->bitrate > 15 * MEGA /* BPS */)
		return 625;

	if (bt->bitrate > 9 * MEGA /* BPS */)
		return 600;

	if (bt->bitrate > 4 * MEGA /* BPS */)
		return 560;

	return 520;
}

/* Bit-timing calculation derived from:
 *
 * Code based on LinCAN sources and H8S2638 project
 * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz
 * Copyright 2005      Stanislav Marek
 * email: pisa@cmp.felk.cvut.cz
 *
 * Calculates proper bit-timing parameters for a specified bit-rate
 * and sample-point, which can then be used to set the bit-timing
 * registers of the CAN controller. You can find more information
 * in the header file linux/can/netlink.h.
 */
static int
can_update_sample_point(const struct can_bittiming_const *btc,
			const unsigned int sample_point_reference, const unsigned int tseg,
			unsigned int *tseg1_ptr, unsigned int *tseg2_ptr,
			unsigned int *sample_point_error_ptr)
{
	unsigned int sample_point_error, best_sample_point_error = UINT_MAX;
	unsigned int sample_point, best_sample_point = 0;
	unsigned int tseg1, tseg2;
	int i;

	for (i = 0; i <= 1; i++) {
		tseg2 = tseg + CAN_SYNC_SEG -
			(sample_point_reference * (tseg + CAN_SYNC_SEG)) /
			1000 - i;
		tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max);
		tseg1 = tseg - tseg2;
		if (tseg1 > btc->tseg1_max) {
			tseg1 = btc->tseg1_max;
			tseg2 = tseg - tseg1;
		}

		sample_point = 1000 * (tseg + CAN_SYNC_SEG - tseg2) /
			(tseg + CAN_SYNC_SEG);
		sample_point_error = abs(sample_point_reference - sample_point);

		if (sample_point <= sample_point_reference &&
		    sample_point_error < best_sample_point_error) {
			best_sample_point = sample_point;
			best_sample_point_error = sample_point_error;
			*tseg1_ptr = tseg1;
			*tseg2_ptr = tseg2;
		}
	}

	if (sample_point_error_ptr)
		*sample_point_error_ptr = best_sample_point_error;

	return best_sample_point;
}

int can_calc_bittiming(const struct net_device *dev, struct can_bittiming *bt,
		       const struct can_bittiming_const *btc, struct netlink_ext_ack *extack)
{
	struct can_priv *priv = netdev_priv(dev);
	unsigned int bitrate;			/* current bitrate */
	unsigned int bitrate_error;		/* diff between calculated and reference value */
	unsigned int best_bitrate_error = UINT_MAX;
	unsigned int sample_point_error;	/* diff between calculated and reference value */
	unsigned int best_sample_point_error = UINT_MAX;
	unsigned int sample_point_reference;	/* reference sample point */
	unsigned int best_tseg = 0;		/* current best value for tseg */
	unsigned int best_brp = 0;		/* current best value for brp */
	unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0;
	u64 v64;
	int err;

	if (bt->sample_point)
		sample_point_reference = bt->sample_point;
	else if (btc == priv->xl.data_bittiming_const &&
		 (priv->ctrlmode & CAN_CTRLMODE_XL_TMS))
		sample_point_reference = can_calc_sample_point_pwm(bt);
	else
		sample_point_reference = can_calc_sample_point_nrz(bt);

	/* tseg even = round down, odd = round up */
	for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1;
	     tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) {
		tsegall = CAN_SYNC_SEG + tseg / 2;

		/* Compute all possible tseg choices (tseg=tseg1+tseg2) */
		brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2;

		/* choose brp step which is possible in system */
		brp = (brp / btc->brp_inc) * btc->brp_inc;
		if (brp < btc->brp_min || brp > btc->brp_max)
			continue;

		bitrate = priv->clock.freq / (brp * tsegall);
		bitrate_error = abs(bt->bitrate - bitrate);

		/* tseg brp biterror */
		if (bitrate_error > best_bitrate_error)
			continue;

		/* reset sample point error if we have a better bitrate */
		if (bitrate_error < best_bitrate_error)
			best_sample_point_error = UINT_MAX;

		can_update_sample_point(btc, sample_point_reference, tseg / 2,
					&tseg1, &tseg2, &sample_point_error);
		if (sample_point_error >= best_sample_point_error)
			continue;

		best_sample_point_error = sample_point_error;
		best_bitrate_error = bitrate_error;
		best_tseg = tseg / 2;
		best_brp = brp;

		if (bitrate_error == 0 && sample_point_error == 0)
			break;
	}

	if (best_bitrate_error) {
		/* Error in one-hundredth of a percent */
		v64 = (u64)best_bitrate_error * 10000;
		do_div(v64, bt->bitrate);
		bitrate_error = (u32)v64;
		/* print at least 0.01% if the error is smaller */
		bitrate_error = max(bitrate_error, 1U);
		if (bitrate_error > CAN_CALC_MAX_ERROR) {
			NL_SET_ERR_MSG_FMT(extack,
					   "bitrate error: %u.%02u%% too high",
					   bitrate_error / 100,
					   bitrate_error % 100);
			return -EINVAL;
		}
		NL_SET_ERR_MSG_FMT(extack,
				   "bitrate error: %u.%02u%%",
				   bitrate_error / 100, bitrate_error % 100);
	}

	/* real sample point */
	bt->sample_point = can_update_sample_point(btc, sample_point_reference,
						   best_tseg, &tseg1, &tseg2,
						   NULL);

	v64 = (u64)best_brp * 1000 * 1000 * 1000;
	do_div(v64, priv->clock.freq);
	bt->tq = (u32)v64;
	bt->prop_seg = tseg1 / 2;
	bt->phase_seg1 = tseg1 - bt->prop_seg;
	bt->phase_seg2 = tseg2;

	can_sjw_set_default(bt);

	err = can_sjw_check(dev, bt, btc, extack);
	if (err)
		return err;

	bt->brp = best_brp;

	/* real bitrate */
	bt->bitrate = priv->clock.freq /
		(bt->brp * can_bit_time(bt));

	return 0;
}

void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const,
		   const struct can_bittiming *dbt,
		   u32 tdc_mask, u32 *ctrlmode, u32 ctrlmode_supported)

{
	u32 tdc_auto = tdc_mask & CAN_CTRLMODE_TDC_AUTO_MASK;

	if (!tdc_const || !(ctrlmode_supported & tdc_auto))
		return;

	*ctrlmode &= ~tdc_mask;

	/* As specified in ISO 11898-1 section 11.3.3 "Transmitter
	 * delay compensation" (TDC) is only applicable if data BRP is
	 * one or two.
	 */
	if (dbt->brp == 1 || dbt->brp == 2) {
		/* Sample point in clock periods */
		u32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg +
					  dbt->phase_seg1) * dbt->brp;

		if (sample_point_in_tc < tdc_const->tdco_min)
			return;
		tdc->tdco = min(sample_point_in_tc, tdc_const->tdco_max);
		*ctrlmode |= tdc_auto;
	}
}

int can_calc_pwm(struct net_device *dev, struct netlink_ext_ack *extack)
{
	struct can_priv *priv = netdev_priv(dev);
	const struct can_pwm_const *pwm_const = priv->xl.pwm_const;
	struct can_pwm *pwm = &priv->xl.pwm;
	u32 xl_tqmin = can_bit_time_tqmin(&priv->xl.data_bittiming);
	u32 xl_ns = can_tqmin_to_ns(xl_tqmin, priv->clock.freq);
	u32 nom_tqmin = can_bit_time_tqmin(&priv->bittiming);
	int pwm_per_bit_max = xl_tqmin / (pwm_const->pwms_min + pwm_const->pwml_min);
	int pwm_per_bit;
	u32 pwm_tqmin;

	/* For 5 MB/s databitrate or greater, xl_ns < CAN_PWM_NS_MAX
	 * giving us a pwm_per_bit of 1 and the loop immediately breaks
	 */
	for (pwm_per_bit = DIV_ROUND_UP(xl_ns, CAN_PWM_NS_MAX);
	     pwm_per_bit <= pwm_per_bit_max; pwm_per_bit++)
		if (xl_tqmin % pwm_per_bit == 0)
			break;

	if (pwm_per_bit > pwm_per_bit_max) {
		NL_SET_ERR_MSG_FMT(extack,
				   "Can not divide the XL data phase's bit time: %u tqmin into multiple PWM symbols",
				   xl_tqmin);
		return -EINVAL;
	}

	pwm_tqmin = xl_tqmin / pwm_per_bit;
	pwm->pwms = DIV_ROUND_UP_POW2(pwm_tqmin, 4);
	pwm->pwml = pwm_tqmin - pwm->pwms;
	pwm->pwmo = nom_tqmin % pwm_tqmin;

	return 0;
}