| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (c) 2013-2020, Intel Corporation. All rights reserved. | |
| * Intel Management Engine Interface (Intel MEI) Linux driver | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/device.h> | |
| #include <linux/errno.h> | |
| #include <linux/types.h> | |
| #include <linux/pci.h> | |
| #include <linux/init.h> | |
| #include <linux/sched.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/pm_domain.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/mei.h> | |
| #include "mei_dev.h" | |
| #include "hw-txe.h" | |
| static const struct pci_device_id mei_txe_pci_tbl[] = { | |
| { PCI_VDEVICE(INTEL, 0x0F18) }, /* Baytrail */ | |
| { PCI_VDEVICE(INTEL, 0x2298) }, /* Cherrytrail */ | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl); | |
| #ifdef CONFIG_PM | |
| static inline void mei_txe_set_pm_domain(struct mei_device *dev); | |
| static inline void mei_txe_unset_pm_domain(struct mei_device *dev); | |
| #else | |
| static inline void mei_txe_set_pm_domain(struct mei_device *dev) {} | |
| static inline void mei_txe_unset_pm_domain(struct mei_device *dev) {} | |
| #endif /* CONFIG_PM */ | |
| /** | |
| * mei_txe_probe - Device Initialization Routine | |
| * | |
| * @pdev: PCI device structure | |
| * @ent: entry in mei_txe_pci_tbl | |
| * | |
| * Return: 0 on success, <0 on failure. | |
| */ | |
| static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | |
| { | |
| struct mei_device *dev; | |
| struct mei_txe_hw *hw; | |
| const int mask = BIT(SEC_BAR) | BIT(BRIDGE_BAR); | |
| int err; | |
| /* enable pci dev */ | |
| err = pcim_enable_device(pdev); | |
| if (err) { | |
| dev_err(&pdev->dev, "failed to enable pci device.\n"); | |
| goto end; | |
| } | |
| /* set PCI host mastering */ | |
| pci_set_master(pdev); | |
| /* pci request regions and mapping IO device memory for mei driver */ | |
| err = pcim_iomap_regions(pdev, mask, KBUILD_MODNAME); | |
| if (err) { | |
| dev_err(&pdev->dev, "failed to get pci regions.\n"); | |
| goto end; | |
| } | |
| err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(36)); | |
| if (err) { | |
| err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); | |
| if (err) { | |
| dev_err(&pdev->dev, "No suitable DMA available.\n"); | |
| goto end; | |
| } | |
| } | |
| /* allocates and initializes the mei dev structure */ | |
| dev = mei_txe_dev_init(pdev); | |
| if (!dev) { | |
| err = -ENOMEM; | |
| goto end; | |
| } | |
| dev->kind = MEI_DEV_KIND_MEI; | |
| hw = to_txe_hw(dev); | |
| hw->mem_addr = pcim_iomap_table(pdev); | |
| err = mei_register(dev, &pdev->dev); | |
| if (err) | |
| goto end; | |
| pci_enable_msi(pdev); | |
| /* clear spurious interrupts */ | |
| mei_clear_interrupts(dev); | |
| /* request and enable interrupt */ | |
| if (pci_dev_msi_enabled(pdev)) | |
| err = request_threaded_irq(pdev->irq, | |
| NULL, | |
| mei_txe_irq_thread_handler, | |
| IRQF_ONESHOT, KBUILD_MODNAME, dev); | |
| else | |
| err = request_threaded_irq(pdev->irq, | |
| mei_txe_irq_quick_handler, | |
| mei_txe_irq_thread_handler, | |
| IRQF_SHARED, KBUILD_MODNAME, dev); | |
| if (err) { | |
| dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n", | |
| pdev->irq); | |
| goto deregister; | |
| } | |
| if (mei_start(dev)) { | |
| dev_err(&pdev->dev, "init hw failure.\n"); | |
| err = -ENODEV; | |
| goto deregister; | |
| } | |
| pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_TXI_RPM_TIMEOUT); | |
| pm_runtime_use_autosuspend(&pdev->dev); | |
| pci_set_drvdata(pdev, dev); | |
| /* | |
| * MEI requires to resume from runtime suspend mode | |
| * in order to perform link reset flow upon system suspend. | |
| */ | |
| dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE); | |
| /* | |
| * TXE maps runtime suspend/resume to own power gating states, | |
| * hence we need to go around native PCI runtime service which | |
| * eventually brings the device into D3cold/hot state. | |
| * But the TXE device cannot wake up from D3 unlike from own | |
| * power gating. To get around PCI device native runtime pm, | |
| * TXE uses runtime pm domain handlers which take precedence. | |
| */ | |
| mei_txe_set_pm_domain(dev); | |
| pm_runtime_put_noidle(&pdev->dev); | |
| return 0; | |
| deregister: | |
| mei_cancel_work(dev); | |
| mei_disable_interrupts(dev); | |
| free_irq(pdev->irq, dev); | |
| mei_deregister(dev); | |
| end: | |
| dev_err(&pdev->dev, "initialization failed.\n"); | |
| return err; | |
| } | |
| /** | |
| * mei_txe_shutdown- Device Shutdown Routine | |
| * | |
| * @pdev: PCI device structure | |
| * | |
| * mei_txe_shutdown is called from the reboot notifier | |
| * it's a simplified version of remove so we go down | |
| * faster. | |
| */ | |
| static void mei_txe_shutdown(struct pci_dev *pdev) | |
| { | |
| struct mei_device *dev = pci_get_drvdata(pdev); | |
| dev_dbg(&pdev->dev, "shutdown\n"); | |
| mei_stop(dev); | |
| mei_txe_unset_pm_domain(dev); | |
| mei_disable_interrupts(dev); | |
| free_irq(pdev->irq, dev); | |
| } | |
| /** | |
| * mei_txe_remove - Device Removal Routine | |
| * | |
| * @pdev: PCI device structure | |
| * | |
| * mei_remove is called by the PCI subsystem to alert the driver | |
| * that it should release a PCI device. | |
| */ | |
| static void mei_txe_remove(struct pci_dev *pdev) | |
| { | |
| struct mei_device *dev = pci_get_drvdata(pdev); | |
| pm_runtime_get_noresume(&pdev->dev); | |
| mei_stop(dev); | |
| mei_txe_unset_pm_domain(dev); | |
| mei_disable_interrupts(dev); | |
| free_irq(pdev->irq, dev); | |
| mei_deregister(dev); | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int mei_txe_pci_suspend(struct device *device) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(device); | |
| struct mei_device *dev = pci_get_drvdata(pdev); | |
| dev_dbg(&pdev->dev, "suspend\n"); | |
| mei_stop(dev); | |
| mei_disable_interrupts(dev); | |
| free_irq(pdev->irq, dev); | |
| pci_disable_msi(pdev); | |
| return 0; | |
| } | |
| static int mei_txe_pci_resume(struct device *device) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(device); | |
| struct mei_device *dev = pci_get_drvdata(pdev); | |
| int err; | |
| pci_enable_msi(pdev); | |
| mei_clear_interrupts(dev); | |
| /* request and enable interrupt */ | |
| if (pci_dev_msi_enabled(pdev)) | |
| err = request_threaded_irq(pdev->irq, | |
| NULL, | |
| mei_txe_irq_thread_handler, | |
| IRQF_ONESHOT, KBUILD_MODNAME, dev); | |
| else | |
| err = request_threaded_irq(pdev->irq, | |
| mei_txe_irq_quick_handler, | |
| mei_txe_irq_thread_handler, | |
| IRQF_SHARED, KBUILD_MODNAME, dev); | |
| if (err) { | |
| dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n", | |
| pdev->irq); | |
| return err; | |
| } | |
| err = mei_restart(dev); | |
| return err; | |
| } | |
| #endif /* CONFIG_PM_SLEEP */ | |
| #ifdef CONFIG_PM | |
| static int mei_txe_pm_runtime_idle(struct device *device) | |
| { | |
| struct mei_device *dev = dev_get_drvdata(device); | |
| dev_dbg(device, "rpm: txe: runtime_idle\n"); | |
| if (mei_write_is_idle(dev)) | |
| pm_runtime_autosuspend(device); | |
| return -EBUSY; | |
| } | |
| static int mei_txe_pm_runtime_suspend(struct device *device) | |
| { | |
| struct mei_device *dev = dev_get_drvdata(device); | |
| int ret; | |
| dev_dbg(device, "rpm: txe: runtime suspend\n"); | |
| mutex_lock(&dev->device_lock); | |
| if (mei_write_is_idle(dev)) | |
| ret = mei_txe_aliveness_set_sync(dev, 0); | |
| else | |
| ret = -EAGAIN; | |
| /* keep irq on we are staying in D0 */ | |
| dev_dbg(device, "rpm: txe: runtime suspend ret=%d\n", ret); | |
| mutex_unlock(&dev->device_lock); | |
| if (ret && ret != -EAGAIN) | |
| schedule_work(&dev->reset_work); | |
| return ret; | |
| } | |
| static int mei_txe_pm_runtime_resume(struct device *device) | |
| { | |
| struct mei_device *dev = dev_get_drvdata(device); | |
| int ret; | |
| dev_dbg(device, "rpm: txe: runtime resume\n"); | |
| mutex_lock(&dev->device_lock); | |
| mei_enable_interrupts(dev); | |
| ret = mei_txe_aliveness_set_sync(dev, 1); | |
| mutex_unlock(&dev->device_lock); | |
| dev_dbg(device, "rpm: txe: runtime resume ret = %d\n", ret); | |
| if (ret) | |
| schedule_work(&dev->reset_work); | |
| return ret; | |
| } | |
| /** | |
| * mei_txe_set_pm_domain - fill and set pm domain structure for device | |
| * | |
| * @dev: mei_device | |
| */ | |
| static inline void mei_txe_set_pm_domain(struct mei_device *dev) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev->parent); | |
| if (pdev->dev.bus && pdev->dev.bus->pm) { | |
| dev->pg_domain.ops = *pdev->dev.bus->pm; | |
| dev->pg_domain.ops.runtime_suspend = mei_txe_pm_runtime_suspend; | |
| dev->pg_domain.ops.runtime_resume = mei_txe_pm_runtime_resume; | |
| dev->pg_domain.ops.runtime_idle = mei_txe_pm_runtime_idle; | |
| dev_pm_domain_set(&pdev->dev, &dev->pg_domain); | |
| } | |
| } | |
| /** | |
| * mei_txe_unset_pm_domain - clean pm domain structure for device | |
| * | |
| * @dev: mei_device | |
| */ | |
| static inline void mei_txe_unset_pm_domain(struct mei_device *dev) | |
| { | |
| /* stop using pm callbacks if any */ | |
| dev_pm_domain_set(dev->parent, NULL); | |
| } | |
| static const struct dev_pm_ops mei_txe_pm_ops = { | |
| SET_SYSTEM_SLEEP_PM_OPS(mei_txe_pci_suspend, | |
| mei_txe_pci_resume) | |
| SET_RUNTIME_PM_OPS( | |
| mei_txe_pm_runtime_suspend, | |
| mei_txe_pm_runtime_resume, | |
| mei_txe_pm_runtime_idle) | |
| }; | |
| #define MEI_TXE_PM_OPS (&mei_txe_pm_ops) | |
| #else | |
| #define MEI_TXE_PM_OPS NULL | |
| #endif /* CONFIG_PM */ | |
| /* | |
| * PCI driver structure | |
| */ | |
| static struct pci_driver mei_txe_driver = { | |
| .name = KBUILD_MODNAME, | |
| .id_table = mei_txe_pci_tbl, | |
| .probe = mei_txe_probe, | |
| .remove = mei_txe_remove, | |
| .shutdown = mei_txe_shutdown, | |
| .driver.pm = MEI_TXE_PM_OPS, | |
| }; | |
| module_pci_driver(mei_txe_driver); | |
| MODULE_AUTHOR("Intel Corporation"); | |
| MODULE_DESCRIPTION("Intel(R) Trusted Execution Environment Interface"); | |
| MODULE_LICENSE("GPL v2"); |