| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) 2025 Intel Corporation | |
| */ | |
| #include <linux/component.h> | |
| #include <linux/mei_cl_bus.h> | |
| #include <linux/module.h> | |
| #include <linux/overflow.h> | |
| #include <linux/pci.h> | |
| #include <linux/slab.h> | |
| #include <linux/uuid.h> | |
| #include <drm/intel/i915_component.h> | |
| #include <drm/intel/intel_lb_mei_interface.h> | |
| #include "mkhi.h" | |
| /** | |
| * DOC: Late Binding Firmware Update/Upload | |
| * | |
| * Late Binding is a firmware update/upload mechanism that allows configuration | |
| * payloads to be securely delivered and applied at runtime, rather than | |
| * being embedded in the system firmware image (e.g., IFWI or SPI flash). | |
| * | |
| * This mechanism is used to update device-level configuration such as: | |
| * - Fan controller | |
| * - Voltage regulator (VR) | |
| * | |
| * Key Characteristics: | |
| * --------------------- | |
| * - Runtime Delivery: | |
| * Firmware blobs are loaded by the host driver (e.g., Xe KMD) | |
| * after the GPU or SoC has booted. | |
| * | |
| * - Secure and Authenticated: | |
| * All payloads are signed and verified by the authentication firmware. | |
| * | |
| * - No Firmware Flashing Required: | |
| * Updates are applied in volatile memory and do not require SPI flash | |
| * modification or system reboot. | |
| * | |
| * - Re-entrant: | |
| * Multiple updates of the same or different types can be applied | |
| * sequentially within a single boot session. | |
| * | |
| * - Version Controlled: | |
| * Each payload includes version and security version number (SVN) | |
| * metadata to support anti-rollback enforcement. | |
| * | |
| * Upload Flow: | |
| * ------------ | |
| * 1. Host driver (KMD or user-space tool) loads the late binding firmware. | |
| * 2. Firmware is passed to the MEI interface and forwarded to | |
| * authentication firmware. | |
| * 3. Authentication firmware authenticates the payload and extracts | |
| * command and data arrays. | |
| * 4. Authentication firmware delivers the configuration to PUnit/PCODE. | |
| * 5. Status is returned back to the host via MEI. | |
| */ | |
| /* Late Binding version 1 */ | |
| #define INTEL_LB_CMD 0x12 | |
| #define INTEL_LB_RSP (INTEL_LB_CMD | 0x80) | |
| #define INTEL_LB_SEND_TIMEOUT_MSEC 3000 | |
| #define INTEL_LB_RECV_TIMEOUT_MSEC 3000 | |
| #define MEI_GUID_MKHI UUID_LE(0xe2c2afa2, 0x3817, 0x4d19, \ | |
| 0x9d, 0x95, 0x6, 0xb1, 0x6b, 0x58, 0x8a, 0x5d) | |
| /** | |
| * struct mei_lb_req - Late Binding request structure | |
| * @header: MKHI message header (see struct mkhi_msg_hdr) | |
| * @type: Type of the Late Binding payload | |
| * @flags: Flags to be passed to the authentication firmware (e.g. %INTEL_LB_FLAGS_IS_PERSISTENT) | |
| * @reserved: Reserved for future use by authentication firmware, must be set to 0 | |
| * @payload_size: Size of the payload data in bytes | |
| * @payload: Payload data to be sent to the authentication firmware | |
| */ | |
| struct mei_lb_req { | |
| struct mkhi_msg_hdr header; | |
| __le32 type; | |
| __le32 flags; | |
| __le32 reserved[2]; | |
| __le32 payload_size; | |
| u8 payload[] __counted_by(payload_size); | |
| } __packed; | |
| /** | |
| * struct mei_lb_rsp - Late Binding response structure | |
| * @header: MKHI message header (see struct mkhi_msg_hdr) | |
| * @type: Type of the Late Binding payload | |
| * @reserved: Reserved for future use by authentication firmware, must be set to 0 | |
| * @status: Status returned by authentication firmware (see &enum intel_lb_status) | |
| */ | |
| struct mei_lb_rsp { | |
| struct mkhi_msg_hdr header; | |
| __le32 type; | |
| __le32 reserved[2]; | |
| __le32 status; | |
| } __packed; | |
| /* Late Binding version 2 */ | |
| #define MEI_LB2_CMD 0x01 | |
| #define MEI_LB2_HDR_FLAG_RSP 0x01 | |
| #define MEI_GUID_LB UUID_LE(0x4ed87243, 0x3980, 0x4d8e, \ | |
| 0xb1, 0xf9, 0x6f, 0xb7, 0xc0, 0x14, 0x8c, 0x4d) | |
| /** | |
| * struct mei_lb2_header - Late Binding2 header | |
| * @command_id: | |
| * @flags: Flags for transport layer (e.g. MEI_LB2_HDR_FLAG_RSP) | |
| * @reserved: Reserved for future use by authentication firmware, must be set to 0 | |
| */ | |
| struct mei_lb2_header { | |
| __le32 command_id; | |
| u8 flags; | |
| u8 reserved[3]; | |
| }; | |
| /** | |
| * struct mei_lb2_rsp_header - Late Binding2 response header | |
| * @header: Common command header | |
| * @status: Status returned by authentication firmware (see &enum intel_lb_status) | |
| */ | |
| struct mei_lb2_rsp_header { | |
| struct mei_lb2_header header; | |
| __le32 status; | |
| }; | |
| #define MEI_LB2_FLAG_FST_CHUNK 0x02 | |
| #define MEI_LB2_FLAG_LST_CHUNK 0x04 | |
| /** | |
| * struct mei_lb2_req - Late Binding2 request | |
| * @header: Common command header | |
| * @type: Type of the Late Binding payload (see &enum intel_lb_type) | |
| * @flags: Flags to be passed to the authentication firmware (MEI_LB2_FLAG_*) | |
| * @reserved: Reserved for future use by authentication firmware, must be set to 0 | |
| * @total_payload_size: Size of whole Late Binding package in bytes | |
| * @payload_size: Size of the payload chunk in bytes | |
| * @payload: Data chunk to be sent to the authentication firmware | |
| */ | |
| struct mei_lb2_req { | |
| struct mei_lb2_header header; | |
| __le32 type; | |
| __le32 flags; | |
| __le32 reserved; | |
| __le32 total_payload_size; | |
| __le32 payload_size; | |
| u8 payload[] __counted_by(payload_size); | |
| }; | |
| /** | |
| * struct mei_lb2_rsp - Late Binding2 response | |
| * @rheader: Common response header | |
| * @type: Type of the Late Binding payload (see &enum intel_lb_type) | |
| * @reserved: Reserved for future use by authentication firmware, must be set to 0 | |
| */ | |
| struct mei_lb2_rsp { | |
| struct mei_lb2_rsp_header rheader; | |
| __le32 type; | |
| __le32 reserved[2]; | |
| }; | |
| static bool mei_lb_check_response_v1(const struct device *dev, ssize_t bytes, | |
| struct mei_lb_rsp *rsp) | |
| { | |
| /* | |
| * Received message size may be smaller than the full message size when | |
| * reply contains only MKHI header with result field set to the error code. | |
| * Check the header size and content first to output exact error, if needed, | |
| * and then process to the whole message. | |
| */ | |
| if (bytes < sizeof(rsp->header)) { | |
| dev_err(dev, "Received less than header size from the firmware: %zd < %zu\n", | |
| bytes, sizeof(rsp->header)); | |
| return false; | |
| } | |
| if (rsp->header.group_id != MKHI_GROUP_ID_GFX) { | |
| dev_err(dev, "Mismatch group id: 0x%x instead of 0x%x\n", | |
| rsp->header.group_id, MKHI_GROUP_ID_GFX); | |
| return false; | |
| } | |
| if (rsp->header.command != INTEL_LB_RSP) { | |
| dev_err(dev, "Mismatch command: 0x%x instead of 0x%x\n", | |
| rsp->header.command, INTEL_LB_RSP); | |
| return false; | |
| } | |
| if (rsp->header.result) { | |
| dev_err(dev, "Error in result: 0x%x\n", rsp->header.result); | |
| return false; | |
| } | |
| if (bytes < sizeof(*rsp)) { | |
| dev_err(dev, "Received less than message size from the firmware: %zd < %zu\n", | |
| bytes, sizeof(*rsp)); | |
| return false; | |
| } | |
| return true; | |
| } | |
| static int mei_lb_push_payload_v1(struct device *dev, struct mei_cl_device *cldev, | |
| u32 type, u32 flags, const void *payload, size_t payload_size) | |
| { | |
| struct mei_lb_req *req = NULL; | |
| struct mei_lb_rsp rsp; | |
| size_t req_size; | |
| ssize_t bytes; | |
| int ret; | |
| req_size = struct_size(req, payload, payload_size); | |
| if (req_size > mei_cldev_mtu(cldev)) { | |
| dev_err(dev, "Payload is too big: %zu\n", payload_size); | |
| ret = -EMSGSIZE; | |
| goto end; | |
| } | |
| req = kmalloc(req_size, GFP_KERNEL); | |
| if (!req) { | |
| ret = -ENOMEM; | |
| goto end; | |
| } | |
| req->header.group_id = MKHI_GROUP_ID_GFX; | |
| req->header.command = INTEL_LB_CMD; | |
| req->type = cpu_to_le32(type); | |
| req->flags = cpu_to_le32(flags); | |
| req->reserved[0] = 0; | |
| req->reserved[1] = 0; | |
| req->payload_size = cpu_to_le32(payload_size); | |
| memcpy(req->payload, payload, payload_size); | |
| bytes = mei_cldev_send_timeout(cldev, (u8 *)req, req_size, | |
| INTEL_LB_SEND_TIMEOUT_MSEC); | |
| if (bytes < 0) { | |
| dev_err(dev, "Failed to send late binding request to firmware. %zd\n", bytes); | |
| ret = bytes; | |
| goto end; | |
| } | |
| bytes = mei_cldev_recv_timeout(cldev, (u8 *)&rsp, sizeof(rsp), | |
| INTEL_LB_RECV_TIMEOUT_MSEC); | |
| if (bytes < 0) { | |
| dev_err(dev, "Failed to receive late binding reply from MEI firmware. %zd\n", | |
| bytes); | |
| ret = bytes; | |
| goto end; | |
| } | |
| if (!mei_lb_check_response_v1(dev, bytes, &rsp)) { | |
| dev_err(dev, "Bad response from the firmware. header: %02x %02x %02x %02x\n", | |
| rsp.header.group_id, rsp.header.command, | |
| rsp.header.reserved, rsp.header.result); | |
| ret = -EPROTO; | |
| goto end; | |
| } | |
| dev_dbg(dev, "status = %u\n", le32_to_cpu(rsp.status)); | |
| ret = (int)le32_to_cpu(rsp.status); | |
| end: | |
| kfree(req); | |
| return ret; | |
| } | |
| static int mei_lb_check_response_v2(const struct device *dev, ssize_t bytes, | |
| struct mei_lb2_rsp *rsp) | |
| { | |
| /* | |
| * Received message size may be smaller than the full message size when | |
| * reply contains only header with status field set to the error code. | |
| * Check the header size and content first to output exact error, if needed, | |
| * and then process to the whole message. | |
| */ | |
| if (bytes < sizeof(rsp->rheader)) { | |
| dev_err(dev, "Received less than header size from the firmware: %zd < %zu\n", | |
| bytes, sizeof(rsp->rheader)); | |
| return -ENOMSG; | |
| } | |
| if (rsp->rheader.header.command_id != cpu_to_le32(MEI_LB2_CMD)) { | |
| dev_err(dev, "Mismatch command: 0x%x instead of 0x%x\n", | |
| rsp->rheader.header.command_id, MEI_LB2_CMD); | |
| return -EPROTO; | |
| } | |
| if (!(rsp->rheader.header.flags & MEI_LB2_HDR_FLAG_RSP)) { | |
| dev_err(dev, "Not a response: 0x%x\n", rsp->rheader.header.flags); | |
| return -EBADMSG; | |
| } | |
| if (rsp->rheader.status) { | |
| dev_err(dev, "Error in result: 0x%x\n", rsp->rheader.status); | |
| return (int)le32_to_cpu(rsp->rheader.status); | |
| } | |
| if (bytes < sizeof(*rsp)) { | |
| dev_err(dev, "Received less than message size from the firmware: %zd < %zu\n", | |
| bytes, sizeof(*rsp)); | |
| return -ENODATA; | |
| } | |
| return 0; | |
| } | |
| static int mei_lb_push_payload_v2(struct device *dev, struct mei_cl_device *cldev, | |
| u32 type, u32 flags, const void *payload, size_t payload_size) | |
| { | |
| u32 first_chunk, last_chunk; | |
| struct mei_lb2_rsp rsp; | |
| size_t sent_data = 0; | |
| size_t chunk_size; | |
| size_t req_size; | |
| ssize_t bytes; | |
| int ret; | |
| struct mei_lb2_req *req __free(kfree) = kzalloc(mei_cldev_mtu(cldev), GFP_KERNEL); | |
| if (!req) | |
| return -ENOMEM; | |
| first_chunk = MEI_LB2_FLAG_FST_CHUNK; | |
| last_chunk = 0; | |
| do { | |
| chunk_size = min(payload_size - sent_data, mei_cldev_mtu(cldev) - sizeof(*req)); | |
| req_size = struct_size(req, payload, chunk_size); | |
| if (sent_data + chunk_size == payload_size) | |
| last_chunk = MEI_LB2_FLAG_LST_CHUNK; | |
| req->header.command_id = cpu_to_le32(MEI_LB2_CMD); | |
| req->type = cpu_to_le32(type); | |
| req->flags = cpu_to_le32(flags | first_chunk | last_chunk); | |
| req->reserved = 0; | |
| req->total_payload_size = cpu_to_le32(payload_size); | |
| req->payload_size = cpu_to_le32(chunk_size); | |
| memcpy(req->payload, payload + sent_data, chunk_size); | |
| dev_dbg(dev, "Sending %zu bytes from offset %zu of %zu%s%s\n", | |
| chunk_size, sent_data, payload_size, | |
| first_chunk ? " first" : "", last_chunk ? " last" : ""); | |
| bytes = mei_cldev_send_timeout(cldev, (u8 *)req, req_size, | |
| INTEL_LB_SEND_TIMEOUT_MSEC); | |
| if (bytes < 0) { | |
| dev_err(dev, "Failed to send late binding request to firmware. %zd\n", | |
| bytes); | |
| return bytes; | |
| } | |
| bytes = mei_cldev_recv_timeout(cldev, (u8 *)&rsp, sizeof(rsp), | |
| INTEL_LB_RECV_TIMEOUT_MSEC); | |
| if (bytes < 0) { | |
| dev_err(dev, "Failed to receive late binding reply from firmware. %zd\n", | |
| bytes); | |
| return bytes; | |
| } | |
| ret = mei_lb_check_response_v2(dev, bytes, &rsp); | |
| if (ret) | |
| return ret; | |
| /* prepare for the next chunk */ | |
| sent_data += chunk_size; | |
| first_chunk = 0; | |
| } while (!last_chunk); | |
| return 0; | |
| } | |
| static int mei_lb_push_payload(struct device *dev, u32 type, u32 flags, | |
| const void *payload, size_t payload_size) | |
| { | |
| struct mei_cl_device *cldev = to_mei_cl_device(dev); | |
| int ret; | |
| ret = mei_cldev_enable(cldev); | |
| if (ret) { | |
| dev_dbg(dev, "Failed to enable firmware client. %d\n", ret); | |
| return ret; | |
| } | |
| if (memcmp(&MEI_GUID_LB, mei_cldev_uuid(cldev), sizeof(uuid_le)) == 0) | |
| ret = mei_lb_push_payload_v2(dev, cldev, type, flags, payload, payload_size); | |
| else | |
| ret = mei_lb_push_payload_v1(dev, cldev, type, flags, payload, payload_size); | |
| mei_cldev_disable(cldev); | |
| return ret; | |
| } | |
| static const struct intel_lb_component_ops mei_lb_ops = { | |
| .push_payload = mei_lb_push_payload, | |
| }; | |
| static int mei_lb_component_master_bind(struct device *dev) | |
| { | |
| return component_bind_all(dev, (void *)&mei_lb_ops); | |
| } | |
| static void mei_lb_component_master_unbind(struct device *dev) | |
| { | |
| component_unbind_all(dev, (void *)&mei_lb_ops); | |
| } | |
| static const struct component_master_ops mei_lb_component_master_ops = { | |
| .bind = mei_lb_component_master_bind, | |
| .unbind = mei_lb_component_master_unbind, | |
| }; | |
| static int mei_lb_component_match(struct device *dev, int subcomponent, | |
| void *data) | |
| { | |
| /* | |
| * This function checks if requester is Intel vendor, | |
| * determines if MEI is standalone PCI device or the auxiliary one | |
| * and checks the following: | |
| * 0) PCI parent: (e.g. /sys/class/mei/mei0/device -> ../../../0000:15:00.0) | |
| * the requester and MEI device has the same grand parent | |
| * 1) Auxiliary parent: (e.g. /sys/class/mei/mei1/device -> ../../../xe.mei-gscfi.768) | |
| * the requester is the parent of MEI device | |
| */ | |
| struct device *base = data; | |
| struct device *basep = dev; | |
| struct pci_dev *pdev; | |
| if (!dev) | |
| return 0; | |
| if (!dev_is_pci(dev)) | |
| return 0; | |
| pdev = to_pci_dev(dev); | |
| if (pdev->vendor != PCI_VENDOR_ID_INTEL) | |
| return 0; | |
| if (subcomponent != INTEL_COMPONENT_LB) | |
| return 0; | |
| base = base->parent; | |
| if (!base) /* MEI device */ | |
| return 0; | |
| if (dev_is_pci(base)) { | |
| /* case 0) PCI parent */ | |
| base = base->parent; /* bridge 1 */ | |
| if (!base) | |
| return 0; | |
| base = base->parent; /* bridge 2 */ | |
| basep = basep->parent; /* bridge 1 */ | |
| if (!basep) | |
| return 0; | |
| basep = basep->parent; /* bridge 2 */ | |
| } else { | |
| /* case 1) Auxiliary parent */ | |
| base = base->parent; /* PCI device */ | |
| } | |
| return !!base && !!basep && base == basep; | |
| } | |
| static int mei_lb_probe(struct mei_cl_device *cldev, | |
| const struct mei_cl_device_id *id) | |
| { | |
| struct component_match *master_match = NULL; | |
| int ret; | |
| component_match_add_typed(&cldev->dev, &master_match, | |
| mei_lb_component_match, &cldev->dev); | |
| if (IS_ERR_OR_NULL(master_match)) | |
| return -ENOMEM; | |
| ret = component_master_add_with_match(&cldev->dev, | |
| &mei_lb_component_master_ops, | |
| master_match); | |
| if (ret < 0) | |
| dev_err(&cldev->dev, "Failed to add late binding master component. %d\n", ret); | |
| return ret; | |
| } | |
| static void mei_lb_remove(struct mei_cl_device *cldev) | |
| { | |
| component_master_del(&cldev->dev, &mei_lb_component_master_ops); | |
| } | |
| static const struct mei_cl_device_id mei_lb_tbl[] = { | |
| { .uuid = MEI_GUID_MKHI, .version = 1 }, | |
| { .uuid = MEI_GUID_LB, .version = MEI_CL_VERSION_ANY }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(mei, mei_lb_tbl); | |
| static struct mei_cl_driver mei_lb_driver = { | |
| .id_table = mei_lb_tbl, | |
| .name = "mei_lb", | |
| .probe = mei_lb_probe, | |
| .remove = mei_lb_remove, | |
| }; | |
| module_mei_cl_driver(mei_lb_driver); | |
| MODULE_AUTHOR("Intel Corporation"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("MEI Late Binding Firmware Update/Upload"); |