| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * ISHTP firmware loader function | |
| * | |
| * Copyright (c) 2024, Intel Corporation. | |
| * | |
| * This module implements the functionality to load the main ISH firmware from the host, starting | |
| * with the Lunar Lake generation. It leverages a new method that enhances space optimization and | |
| * flexibility by dividing the ISH firmware into a bootloader and main firmware. | |
| * | |
| * Please refer to the [Documentation](Documentation/hid/intel-ish-hid.rst) for the details on | |
| * flows. | |
| * | |
| * Additionally, address potential error scenarios to ensure graceful failure handling. | |
| * - Firmware Image Not Found: | |
| * Occurs when `request_firmware()` cannot locate the firmware image. The ISH firmware will | |
| * remain in a state awaiting firmware loading from the host, with no further action from | |
| * the ISHTP driver. | |
| * Recovery: Re-insmod the ISH drivers allows for a retry of the firmware loading from the host. | |
| * | |
| * - DMA Buffer Allocation Failure: | |
| * This happens if allocating a DMA buffer during `prepare_dma_bufs()` fails. The ISH firmware | |
| * will stay in a waiting state, and the ISHTP driver will release any allocated DMA buffers and | |
| * firmware without further actions. | |
| * Recovery: Re-insmod the ISH drivers allows for a retry of the firmware loading from the host. | |
| * | |
| * - Incorrect Firmware Image: | |
| * Using an incorrect firmware image will initiate the firmware loading process but will | |
| * eventually be refused by the ISH firmware after three unsuccessful attempts, indicated by | |
| * returning an error code. The ISHTP driver will stop attempting after three tries. | |
| * Recovery: A platform reset is required to retry firmware loading from the host. | |
| */ | |
| #define dev_fmt(fmt) "ISH loader: " fmt | |
| #include <linux/cacheflush.h> | |
| #include <linux/container_of.h> | |
| #include <linux/crc32.h> | |
| #include <linux/dev_printk.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/dmi.h> | |
| #include <linux/errno.h> | |
| #include <linux/firmware.h> | |
| #include <linux/gfp_types.h> | |
| #include <linux/math.h> | |
| #include <linux/module.h> | |
| #include <linux/pfn.h> | |
| #include <linux/sprintf.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/wait.h> | |
| #include "hbm.h" | |
| #include "loader.h" | |
| /** | |
| * loader_write_message() - Write a message to the ISHTP device | |
| * @dev: The ISHTP device | |
| * @buf: The buffer containing the message | |
| * @len: The length of the message | |
| * | |
| * Return: 0 on success, negative error code on failure | |
| */ | |
| static int loader_write_message(struct ishtp_device *dev, void *buf, int len) | |
| { | |
| struct ishtp_msg_hdr ishtp_hdr = { | |
| .fw_addr = ISHTP_LOADER_CLIENT_ADDR, | |
| .length = len, | |
| .msg_complete = 1, | |
| }; | |
| dev->fw_loader_received = false; | |
| return ishtp_write_message(dev, &ishtp_hdr, buf); | |
| } | |
| /** | |
| * loader_xfer_cmd() - Transfer a command to the ISHTP device | |
| * @dev: The ISHTP device | |
| * @req: The request buffer | |
| * @req_len: The length of the request | |
| * @resp: The response buffer | |
| * @resp_len: The length of the response | |
| * | |
| * Return: 0 on success, negative error code on failure | |
| */ | |
| static int loader_xfer_cmd(struct ishtp_device *dev, void *req, int req_len, | |
| void *resp, int resp_len) | |
| { | |
| union loader_msg_header req_hdr; | |
| union loader_msg_header resp_hdr; | |
| struct device *devc = dev->devc; | |
| int rv; | |
| dev->fw_loader_rx_buf = resp; | |
| dev->fw_loader_rx_size = resp_len; | |
| rv = loader_write_message(dev, req, req_len); | |
| req_hdr.val32 = le32_to_cpup(req); | |
| if (rv < 0) { | |
| dev_err(devc, "write cmd %u failed:%d\n", req_hdr.command, rv); | |
| return rv; | |
| } | |
| /* Wait the ACK */ | |
| wait_event_interruptible_timeout(dev->wait_loader_recvd_msg, dev->fw_loader_received, | |
| ISHTP_LOADER_TIMEOUT); | |
| resp_hdr.val32 = le32_to_cpup(resp); | |
| dev->fw_loader_rx_size = 0; | |
| dev->fw_loader_rx_buf = NULL; | |
| if (!dev->fw_loader_received) { | |
| dev_err(devc, "wait response of cmd %u timeout\n", req_hdr.command); | |
| return -ETIMEDOUT; | |
| } | |
| if (!resp_hdr.is_response) { | |
| dev_err(devc, "not a response for %u\n", req_hdr.command); | |
| return -EBADMSG; | |
| } | |
| if (req_hdr.command != resp_hdr.command) { | |
| dev_err(devc, "unexpected cmd response %u:%u\n", req_hdr.command, | |
| resp_hdr.command); | |
| return -EBADMSG; | |
| } | |
| if (resp_hdr.status) { | |
| dev_err(devc, "cmd %u failed %u\n", req_hdr.command, resp_hdr.status); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * release_dma_bufs() - Release the DMA buffer for transferring firmware fragments | |
| * @dev: The ISHTP device | |
| * @fragment: The ISHTP firmware fragment descriptor | |
| * @dma_bufs: The array of DMA fragment buffers | |
| * @fragment_size: The size of a single DMA fragment | |
| */ | |
| static void release_dma_bufs(struct ishtp_device *dev, | |
| struct loader_xfer_dma_fragment *fragment, | |
| void **dma_bufs, u32 fragment_size) | |
| { | |
| dma_addr_t dma_addr; | |
| int i; | |
| for (i = 0; i < FRAGMENT_MAX_NUM; i++) { | |
| if (dma_bufs[i]) { | |
| dma_addr = le64_to_cpu(fragment->fragment_tbl[i].ddr_adrs); | |
| dma_free_coherent(dev->devc, fragment_size, dma_bufs[i], dma_addr); | |
| dma_bufs[i] = NULL; | |
| } | |
| } | |
| } | |
| /** | |
| * prepare_dma_bufs() - Prepare the DMA buffer for transferring firmware fragments | |
| * @dev: The ISHTP device | |
| * @ish_fw: The ISH firmware | |
| * @fragment: The ISHTP firmware fragment descriptor | |
| * @dma_bufs: The array of DMA fragment buffers | |
| * @fragment_size: The size of a single DMA fragment | |
| * @fragment_count: Number of fragments | |
| * | |
| * Return: 0 on success, negative error code on failure | |
| */ | |
| static int prepare_dma_bufs(struct ishtp_device *dev, | |
| const struct firmware *ish_fw, | |
| struct loader_xfer_dma_fragment *fragment, | |
| void **dma_bufs, u32 fragment_size, u32 fragment_count) | |
| { | |
| dma_addr_t dma_addr; | |
| u32 offset = 0; | |
| u32 length; | |
| int i; | |
| for (i = 0; i < fragment_count && offset < ish_fw->size; i++) { | |
| dma_bufs[i] = dma_alloc_coherent(dev->devc, fragment_size, &dma_addr, GFP_KERNEL); | |
| if (!dma_bufs[i]) | |
| return -ENOMEM; | |
| fragment->fragment_tbl[i].ddr_adrs = cpu_to_le64(dma_addr); | |
| length = clamp(ish_fw->size - offset, 0, fragment_size); | |
| fragment->fragment_tbl[i].length = cpu_to_le32(length); | |
| fragment->fragment_tbl[i].fw_off = cpu_to_le32(offset); | |
| memcpy(dma_bufs[i], ish_fw->data + offset, length); | |
| clflush_cache_range(dma_bufs[i], fragment_size); | |
| offset += length; | |
| } | |
| return 0; | |
| } | |
| /* Patterns with PRODUCT_FAMILY */ | |
| #define ISH_FW_FILE_VENDOR_FAMILY_NAME_SKU_FMT "intel/ish/ish_%s_%08x_%08x_%08x_%08x.bin" | |
| #define ISH_FW_FILE_VENDOR_FAMILY_SKU_FMT "intel/ish/ish_%s_%08x_%08x_%08x.bin" | |
| #define ISH_FW_FILE_VENDOR_FAMILY_NAME_FMT "intel/ish/ish_%s_%08x_%08x_%08x.bin" | |
| #define ISH_FW_FILE_VENDOR_FAMILY_FMT "intel/ish/ish_%s_%08x_%08x.bin" | |
| #define ISH_FW_FILE_VENDOR_NAME_SKU_FMT "intel/ish/ish_%s_%08x_%08x_%08x.bin" | |
| #define ISH_FW_FILE_VENDOR_SKU_FMT "intel/ish/ish_%s_%08x_%08x.bin" | |
| #define ISH_FW_FILE_VENDOR_NAME_FMT "intel/ish/ish_%s_%08x_%08x.bin" | |
| #define ISH_FW_FILE_VENDOR_FMT "intel/ish/ish_%s_%08x.bin" | |
| #define ISH_FW_FILE_DEFAULT_FMT "intel/ish/ish_%s.bin" | |
| #define ISH_FW_FILENAME_LEN_MAX 72 | |
| #define ISH_CRC_INIT (~0u) | |
| #define ISH_CRC_XOROUT (~0u) | |
| static int _request_ish_firmware(const struct firmware **firmware_p, | |
| const char *name, struct device *dev) | |
| { | |
| int ret; | |
| dev_dbg(dev, "Try to load firmware: %s\n", name); | |
| ret = firmware_request_nowarn(firmware_p, name, dev); | |
| if (!ret) | |
| dev_info(dev, "load firmware: %s\n", name); | |
| return ret; | |
| } | |
| /** | |
| * request_ish_firmware() - Request and load the ISH firmware. | |
| * @firmware_p: Pointer to the firmware image. | |
| * @dev: Device for which firmware is being requested. | |
| * | |
| * This function attempts to load the Integrated Sensor Hub (ISH) firmware | |
| * for the given device in the following order, prioritizing custom firmware | |
| * with more precise matching patterns: | |
| * | |
| * ish_${fw_generation}_${SYS_VENDOR_CRC32}_$(PRODUCT_FAMILY_CRC32) | |
| * _$(PRODUCT_NAME_CRC32)_${PRODUCT_SKU_CRC32}.bin | |
| * | |
| * ish_${fw_generation}_${SYS_VENDOR_CRC32}_$(PRODUCT_FAMILY_CRC32)_${PRODUCT_SKU_CRC32}.bin | |
| * ish_${fw_generation}_${SYS_VENDOR_CRC32}_$(PRODUCT_FAMILY_CRC32)_$(PRODUCT_NAME_CRC32).bin | |
| * ish_${fw_generation}_${SYS_VENDOR_CRC32}_$(PRODUCT_FAMILY_CRC32).bin | |
| * ish_${fw_generation}_${SYS_VENDOR_CRC32}_$(PRODUCT_NAME_CRC32)_${PRODUCT_SKU_CRC32}.bin | |
| * ish_${fw_generation}_${SYS_VENDOR_CRC32}_${PRODUCT_SKU_CRC32}.bin | |
| * ish_${fw_generation}_${SYS_VENDOR_CRC32}_$(PRODUCT_NAME_CRC32).bin | |
| * ish_${fw_generation}_${SYS_VENDOR_CRC32}.bin | |
| * ish_${fw_generation}.bin | |
| * | |
| * The driver will load the first matching firmware and skip the rest. If no | |
| * matching firmware is found, it will proceed to the next pattern in the | |
| * specified order. If all searches fail, the default Intel firmware, listed | |
| * last in the order above, will be loaded. | |
| * | |
| * The firmware file name is constructed using CRC32 checksums of strings. | |
| * This is done to create a valid file name that does not contain spaces | |
| * or special characters which may be present in the original strings. | |
| * | |
| * The CRC-32 algorithm uses the following parameters: | |
| * Poly: 0x04C11DB7 | |
| * Init: 0xFFFFFFFF | |
| * RefIn: true | |
| * RefOut: true | |
| * XorOut: 0xFFFFFFFF | |
| * | |
| * Return: 0 on success, negative error code on failure. | |
| */ | |
| static int request_ish_firmware(const struct firmware **firmware_p, | |
| struct device *dev) | |
| { | |
| const char *gen, *sys_vendor, *product_name, *product_sku; | |
| const char *product_family; | |
| struct ishtp_device *ishtp = dev_get_drvdata(dev); | |
| u32 vendor_crc, name_crc, sku_crc, family_crc; | |
| char filename[ISH_FW_FILENAME_LEN_MAX]; | |
| int ret; | |
| gen = ishtp->driver_data->fw_generation; | |
| sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); | |
| product_name = dmi_get_system_info(DMI_PRODUCT_NAME); | |
| product_sku = dmi_get_system_info(DMI_PRODUCT_SKU); | |
| product_family = dmi_get_system_info(DMI_PRODUCT_FAMILY); | |
| if (sys_vendor) | |
| vendor_crc = crc32(ISH_CRC_INIT, sys_vendor, strlen(sys_vendor)) ^ ISH_CRC_XOROUT; | |
| if (product_family) | |
| family_crc = crc32(ISH_CRC_INIT, product_family, | |
| strlen(product_family)) ^ ISH_CRC_XOROUT; | |
| if (product_name) | |
| name_crc = crc32(ISH_CRC_INIT, product_name, strlen(product_name)) ^ ISH_CRC_XOROUT; | |
| if (product_sku) | |
| sku_crc = crc32(ISH_CRC_INIT, product_sku, strlen(product_sku)) ^ ISH_CRC_XOROUT; | |
| /* PRODUCT_FAMILY-extended matching */ | |
| if (sys_vendor && product_family && product_name && product_sku) { | |
| snprintf(filename, sizeof(filename), | |
| ISH_FW_FILE_VENDOR_FAMILY_NAME_SKU_FMT, | |
| gen, vendor_crc, family_crc, name_crc, sku_crc); | |
| ret = _request_ish_firmware(firmware_p, filename, dev); | |
| if (!ret) | |
| return 0; | |
| } | |
| if (sys_vendor && product_family && product_sku) { | |
| snprintf(filename, sizeof(filename), | |
| ISH_FW_FILE_VENDOR_FAMILY_SKU_FMT, | |
| gen, vendor_crc, family_crc, sku_crc); | |
| ret = _request_ish_firmware(firmware_p, filename, dev); | |
| if (!ret) | |
| return 0; | |
| } | |
| if (sys_vendor && product_family && product_name) { | |
| snprintf(filename, sizeof(filename), | |
| ISH_FW_FILE_VENDOR_FAMILY_NAME_FMT, | |
| gen, vendor_crc, family_crc, name_crc); | |
| ret = _request_ish_firmware(firmware_p, filename, dev); | |
| if (!ret) | |
| return 0; | |
| } | |
| if (sys_vendor && product_family) { | |
| snprintf(filename, sizeof(filename), | |
| ISH_FW_FILE_VENDOR_FAMILY_FMT, | |
| gen, vendor_crc, family_crc); | |
| ret = _request_ish_firmware(firmware_p, filename, dev); | |
| if (!ret) | |
| return 0; | |
| } | |
| if (sys_vendor && product_name && product_sku) { | |
| snprintf(filename, sizeof(filename), ISH_FW_FILE_VENDOR_NAME_SKU_FMT, gen, | |
| vendor_crc, name_crc, sku_crc); | |
| ret = _request_ish_firmware(firmware_p, filename, dev); | |
| if (!ret) | |
| return 0; | |
| } | |
| if (sys_vendor && product_sku) { | |
| snprintf(filename, sizeof(filename), ISH_FW_FILE_VENDOR_SKU_FMT, gen, vendor_crc, | |
| sku_crc); | |
| ret = _request_ish_firmware(firmware_p, filename, dev); | |
| if (!ret) | |
| return 0; | |
| } | |
| if (sys_vendor && product_name) { | |
| snprintf(filename, sizeof(filename), ISH_FW_FILE_VENDOR_NAME_FMT, gen, vendor_crc, | |
| name_crc); | |
| ret = _request_ish_firmware(firmware_p, filename, dev); | |
| if (!ret) | |
| return 0; | |
| } | |
| if (sys_vendor) { | |
| snprintf(filename, sizeof(filename), ISH_FW_FILE_VENDOR_FMT, gen, vendor_crc); | |
| ret = _request_ish_firmware(firmware_p, filename, dev); | |
| if (!ret) | |
| return 0; | |
| } | |
| snprintf(filename, sizeof(filename), ISH_FW_FILE_DEFAULT_FMT, gen); | |
| return _request_ish_firmware(firmware_p, filename, dev); | |
| } | |
| static int copy_manifest(const struct firmware *fw, struct ish_global_manifest *manifest) | |
| { | |
| u32 offset; | |
| for (offset = 0; offset + sizeof(*manifest) < fw->size; offset += ISH_MANIFEST_ALIGNMENT) { | |
| memcpy(manifest, fw->data + offset, sizeof(*manifest)); | |
| if (le32_to_cpu(manifest->sig_fourcc) == ISH_GLOBAL_SIG) | |
| return 0; | |
| } | |
| return -1; | |
| } | |
| static void copy_ish_version(struct version_in_manifest *src, struct ish_version *dst) | |
| { | |
| dst->major = le16_to_cpu(src->major); | |
| dst->minor = le16_to_cpu(src->minor); | |
| dst->hotfix = le16_to_cpu(src->hotfix); | |
| dst->build = le16_to_cpu(src->build); | |
| } | |
| /** | |
| * ishtp_loader_work() - Load the ISHTP firmware | |
| * @work: The work structure | |
| * | |
| * The ISH Loader attempts to load firmware by sending a series of commands | |
| * to the ISH device. If a command fails to be acknowledged by the ISH device, | |
| * the loader will retry sending the command, up to a maximum of | |
| * ISHTP_LOADER_RETRY_TIMES. | |
| * | |
| * After the maximum number of retries has been reached without success, the | |
| * ISH bootloader will return an error status code and will no longer respond | |
| * to the driver's commands. This behavior indicates that the ISH Loader has | |
| * encountered a critical error during the firmware loading process. | |
| * | |
| * In such a case, where the ISH bootloader is unresponsive after all retries | |
| * have been exhausted, a platform reset is required to restore communication | |
| * with the ISH device and to recover from this error state. | |
| */ | |
| void ishtp_loader_work(struct work_struct *work) | |
| { | |
| DEFINE_RAW_FLEX(struct loader_xfer_dma_fragment, fragment, fragment_tbl, FRAGMENT_MAX_NUM); | |
| struct ishtp_device *dev = container_of(work, struct ishtp_device, work_fw_loader); | |
| union loader_msg_header query_hdr = { .command = LOADER_CMD_XFER_QUERY, }; | |
| union loader_msg_header start_hdr = { .command = LOADER_CMD_START, }; | |
| union loader_msg_header fragment_hdr = { .command = LOADER_CMD_XFER_FRAGMENT, }; | |
| struct loader_xfer_query query = { .header = cpu_to_le32(query_hdr.val32), }; | |
| struct loader_start start = { .header = cpu_to_le32(start_hdr.val32), }; | |
| union loader_recv_message recv_msg; | |
| struct ish_global_manifest manifest; | |
| const struct firmware *ish_fw; | |
| void *dma_bufs[FRAGMENT_MAX_NUM] = {}; | |
| u32 fragment_size; | |
| u32 fragment_count; | |
| int retry = ISHTP_LOADER_RETRY_TIMES; | |
| int rv; | |
| rv = request_ish_firmware(&ish_fw, dev->devc); | |
| if (rv < 0) { | |
| dev_err(dev->devc, "request ISH firmware failed:%d\n", rv); | |
| return; | |
| } | |
| fragment->fragment.header = cpu_to_le32(fragment_hdr.val32); | |
| fragment->fragment.xfer_mode = cpu_to_le32(LOADER_XFER_MODE_DMA); | |
| fragment->fragment.is_last = cpu_to_le32(1); | |
| fragment->fragment.size = cpu_to_le32(ish_fw->size); | |
| /* Calculate the size of a single DMA fragment */ | |
| fragment_size = PFN_ALIGN(DIV_ROUND_UP(ish_fw->size, FRAGMENT_MAX_NUM)); | |
| /* Calculate the count of DMA fragments */ | |
| fragment_count = DIV_ROUND_UP(ish_fw->size, fragment_size); | |
| fragment->fragment_cnt = cpu_to_le32(fragment_count); | |
| rv = prepare_dma_bufs(dev, ish_fw, fragment, dma_bufs, fragment_size, fragment_count); | |
| if (rv) { | |
| dev_err(dev->devc, "prepare DMA buffer failed.\n"); | |
| goto out; | |
| } | |
| do { | |
| query.image_size = cpu_to_le32(ish_fw->size); | |
| rv = loader_xfer_cmd(dev, &query, sizeof(query), recv_msg.raw_data, | |
| sizeof(struct loader_xfer_query_ack)); | |
| if (rv) | |
| continue; /* try again if failed */ | |
| dev_dbg(dev->devc, "ISH Bootloader Version %u.%u.%u.%u\n", | |
| recv_msg.query_ack.version_major, | |
| recv_msg.query_ack.version_minor, | |
| recv_msg.query_ack.version_hotfix, | |
| recv_msg.query_ack.version_build); | |
| rv = loader_xfer_cmd(dev, fragment, | |
| struct_size(fragment, fragment_tbl, fragment_count), | |
| recv_msg.raw_data, sizeof(struct loader_xfer_fragment_ack)); | |
| if (rv) | |
| continue; /* try again if failed */ | |
| rv = loader_xfer_cmd(dev, &start, sizeof(start), recv_msg.raw_data, | |
| sizeof(struct loader_start_ack)); | |
| if (rv) | |
| continue; /* try again if failed */ | |
| dev_info(dev->devc, "firmware loaded. size:%zu\n", ish_fw->size); | |
| if (!copy_manifest(ish_fw, &manifest)) { | |
| copy_ish_version(&manifest.base_ver, &dev->base_ver); | |
| copy_ish_version(&manifest.prj_ver, &dev->prj_ver); | |
| dev_info(dev->devc, "FW base version: %u.%u.%u.%u\n", | |
| dev->base_ver.major, dev->base_ver.minor, | |
| dev->base_ver.hotfix, dev->base_ver.build); | |
| dev_info(dev->devc, "FW project version: %u.%u.%u.%u\n", | |
| dev->prj_ver.major, dev->prj_ver.minor, | |
| dev->prj_ver.hotfix, dev->prj_ver.build); | |
| } | |
| break; | |
| } while (--retry); | |
| out: | |
| release_dma_bufs(dev, fragment, dma_bufs, fragment_size); | |
| release_firmware(ish_fw); | |
| } |