| // SPDX-License-Identifier: GPL-2.0-only | |
| /* ----------------------------------------------------------------------- | |
| * | |
| * Copyright 2011 Intel Corporation; author Matt Fleming | |
| * | |
| * ----------------------------------------------------------------------- */ | |
| #include <linux/efi.h> | |
| #include <linux/pci.h> | |
| #include <linux/stddef.h> | |
| #include <asm/efi.h> | |
| #include <asm/e820/types.h> | |
| #include <asm/setup.h> | |
| #include <asm/desc.h> | |
| #include <asm/boot.h> | |
| #include <asm/kaslr.h> | |
| #include <asm/sev.h> | |
| #include "efistub.h" | |
| #include "x86-stub.h" | |
| extern char _bss[], _ebss[]; | |
| const efi_system_table_t *efi_system_table; | |
| const efi_dxe_services_table_t *efi_dxe_table; | |
| static efi_loaded_image_t *image = NULL; | |
| static efi_memory_attribute_protocol_t *memattr; | |
| typedef union sev_memory_acceptance_protocol sev_memory_acceptance_protocol_t; | |
| union sev_memory_acceptance_protocol { | |
| struct { | |
| efi_status_t (__efiapi * allow_unaccepted_memory)( | |
| sev_memory_acceptance_protocol_t *); | |
| }; | |
| struct { | |
| u32 allow_unaccepted_memory; | |
| } mixed_mode; | |
| }; | |
| static efi_status_t | |
| preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom) | |
| { | |
| struct pci_setup_rom *rom __free(efi_pool) = NULL; | |
| efi_status_t status; | |
| unsigned long size; | |
| uint64_t romsize; | |
| void *romimage; | |
| /* | |
| * Some firmware images contain EFI function pointers at the place where | |
| * the romimage and romsize fields are supposed to be. Typically the EFI | |
| * code is mapped at high addresses, translating to an unrealistically | |
| * large romsize. The UEFI spec limits the size of option ROMs to 16 | |
| * MiB so we reject any ROMs over 16 MiB in size to catch this. | |
| */ | |
| romimage = efi_table_attr(pci, romimage); | |
| romsize = efi_table_attr(pci, romsize); | |
| if (!romimage || !romsize || romsize > SZ_16M) | |
| return EFI_INVALID_PARAMETER; | |
| size = romsize + sizeof(*rom); | |
| status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, size, | |
| (void **)&rom); | |
| if (status != EFI_SUCCESS) { | |
| efi_err("Failed to allocate memory for 'rom'\n"); | |
| return status; | |
| } | |
| memset(rom, 0, sizeof(*rom)); | |
| rom->data.type = SETUP_PCI; | |
| rom->data.len = size - sizeof(struct setup_data); | |
| rom->data.next = 0; | |
| rom->pcilen = romsize; | |
| status = efi_call_proto(pci, pci.read, EfiPciIoWidthUint16, | |
| PCI_VENDOR_ID, 1, &rom->vendor); | |
| if (status != EFI_SUCCESS) { | |
| efi_err("Failed to read rom->vendor\n"); | |
| return status; | |
| } | |
| status = efi_call_proto(pci, pci.read, EfiPciIoWidthUint16, | |
| PCI_DEVICE_ID, 1, &rom->devid); | |
| if (status != EFI_SUCCESS) { | |
| efi_err("Failed to read rom->devid\n"); | |
| return status; | |
| } | |
| status = efi_call_proto(pci, get_location, &rom->segment, &rom->bus, | |
| &rom->device, &rom->function); | |
| if (status != EFI_SUCCESS) | |
| return status; | |
| memcpy(rom->romdata, romimage, romsize); | |
| *__rom = no_free_ptr(rom); | |
| return EFI_SUCCESS; | |
| } | |
| /* | |
| * There's no way to return an informative status from this function, | |
| * because any analysis (and printing of error messages) needs to be | |
| * done directly at the EFI function call-site. | |
| * | |
| * For example, EFI_INVALID_PARAMETER could indicate a bug or maybe we | |
| * just didn't find any PCI devices, but there's no way to tell outside | |
| * the context of the call. | |
| */ | |
| static void setup_efi_pci(struct boot_params *params) | |
| { | |
| efi_status_t status; | |
| efi_handle_t *pci_handle __free(efi_pool) = NULL; | |
| efi_guid_t pci_proto = EFI_PCI_IO_PROTOCOL_GUID; | |
| struct setup_data *data; | |
| unsigned long num; | |
| efi_handle_t h; | |
| status = efi_bs_call(locate_handle_buffer, EFI_LOCATE_BY_PROTOCOL, | |
| &pci_proto, NULL, &num, &pci_handle); | |
| if (status != EFI_SUCCESS) | |
| return; | |
| data = (struct setup_data *)(unsigned long)params->hdr.setup_data; | |
| while (data && data->next) | |
| data = (struct setup_data *)(unsigned long)data->next; | |
| for_each_efi_handle(h, pci_handle, num) { | |
| efi_pci_io_protocol_t *pci = NULL; | |
| struct pci_setup_rom *rom; | |
| status = efi_bs_call(handle_protocol, h, &pci_proto, | |
| (void **)&pci); | |
| if (status != EFI_SUCCESS || !pci) | |
| continue; | |
| status = preserve_pci_rom_image(pci, &rom); | |
| if (status != EFI_SUCCESS) | |
| continue; | |
| if (data) | |
| data->next = (unsigned long)rom; | |
| else | |
| params->hdr.setup_data = (unsigned long)rom; | |
| data = (struct setup_data *)rom; | |
| } | |
| } | |
| static void retrieve_apple_device_properties(struct boot_params *boot_params) | |
| { | |
| efi_guid_t guid = APPLE_PROPERTIES_PROTOCOL_GUID; | |
| struct setup_data *data, *new; | |
| efi_status_t status; | |
| u32 size = 0; | |
| apple_properties_protocol_t *p; | |
| status = efi_bs_call(locate_protocol, &guid, NULL, (void **)&p); | |
| if (status != EFI_SUCCESS) | |
| return; | |
| if (efi_table_attr(p, version) != 0x10000) { | |
| efi_err("Unsupported properties proto version\n"); | |
| return; | |
| } | |
| efi_call_proto(p, get_all, NULL, &size); | |
| if (!size) | |
| return; | |
| do { | |
| status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, | |
| size + sizeof(struct setup_data), | |
| (void **)&new); | |
| if (status != EFI_SUCCESS) { | |
| efi_err("Failed to allocate memory for 'properties'\n"); | |
| return; | |
| } | |
| status = efi_call_proto(p, get_all, new->data, &size); | |
| if (status == EFI_BUFFER_TOO_SMALL) | |
| efi_bs_call(free_pool, new); | |
| } while (status == EFI_BUFFER_TOO_SMALL); | |
| new->type = SETUP_APPLE_PROPERTIES; | |
| new->len = size; | |
| new->next = 0; | |
| data = (struct setup_data *)(unsigned long)boot_params->hdr.setup_data; | |
| if (!data) { | |
| boot_params->hdr.setup_data = (unsigned long)new; | |
| } else { | |
| while (data->next) | |
| data = (struct setup_data *)(unsigned long)data->next; | |
| data->next = (unsigned long)new; | |
| } | |
| } | |
| struct smbios_entry_point { | |
| u8 anchor[4]; | |
| u8 ep_checksum; | |
| u8 ep_length; | |
| u8 major_version; | |
| u8 minor_version; | |
| u16 max_size_entry; | |
| u8 ep_rev; | |
| u8 reserved[5]; | |
| struct __packed { | |
| u8 anchor[5]; | |
| u8 checksum; | |
| u16 st_length; | |
| u32 st_address; | |
| u16 number_of_entries; | |
| u8 bcd_rev; | |
| } intm; | |
| }; | |
| static bool verify_ep_checksum(const void *ptr, int length) | |
| { | |
| u8 sum = 0; | |
| for (int i = 0; i < length; i++) | |
| sum += ((u8 *)ptr)[i]; | |
| return sum == 0; | |
| } | |
| static bool verify_ep_integrity(const struct smbios_entry_point *ep) | |
| { | |
| if (memcmp(ep->anchor, "_SM_", sizeof(ep->anchor)) != 0) | |
| return false; | |
| if (memcmp(ep->intm.anchor, "_DMI_", sizeof(ep->intm.anchor)) != 0) | |
| return false; | |
| if (!verify_ep_checksum(ep, ep->ep_length) || | |
| !verify_ep_checksum(&ep->intm, sizeof(ep->intm))) | |
| return false; | |
| return true; | |
| } | |
| static const struct efi_smbios_record *search_record(void *table, u32 length, | |
| u8 type) | |
| { | |
| const u8 *p, *end; | |
| p = (u8 *)table; | |
| end = p + length; | |
| while (p + sizeof(struct efi_smbios_record) < end) { | |
| const struct efi_smbios_record *hdr = | |
| (struct efi_smbios_record *)p; | |
| const u8 *next; | |
| if (hdr->type == type) | |
| return hdr; | |
| /* Type 127 = End-of-Table */ | |
| if (hdr->type == 0x7F) | |
| return NULL; | |
| /* Jumping to the unformed section */ | |
| next = p + hdr->length; | |
| /* Unformed section ends with 0000h */ | |
| while ((next[0] != 0 || next[1] != 0) && next + 1 < end) | |
| next++; | |
| next += 2; | |
| p = next; | |
| } | |
| return NULL; | |
| } | |
| static const struct efi_smbios_record *get_table_record(u8 type) | |
| { | |
| const struct smbios_entry_point *ep; | |
| /* | |
| * Locate the legacy 32-bit SMBIOS entrypoint in memory, and parse it | |
| * directly. Needed by some Macs that do not implement the EFI protocol. | |
| */ | |
| ep = get_efi_config_table(SMBIOS_TABLE_GUID); | |
| if (!ep) | |
| return NULL; | |
| if (!verify_ep_integrity(ep)) | |
| return NULL; | |
| return search_record((void *)(unsigned long)ep->intm.st_address, | |
| ep->intm.st_length, type); | |
| } | |
| static bool apple_match_product_name(void) | |
| { | |
| static const char type1_product_matches[][15] = { | |
| "MacBookPro11,3", | |
| "MacBookPro11,5", | |
| "MacBookPro13,3", | |
| "MacBookPro14,3", | |
| "MacBookPro15,1", | |
| "MacBookPro15,3", | |
| "MacBookPro16,1", | |
| "MacBookPro16,4", | |
| }; | |
| const struct efi_smbios_type1_record *record; | |
| const u8 *product; | |
| record = (struct efi_smbios_type1_record *) | |
| (efi_get_smbios_record(1) ?: get_table_record(1)); | |
| if (!record) | |
| return false; | |
| product = efi_get_smbios_string(record, product_name); | |
| if (!product) | |
| return false; | |
| for (int i = 0; i < ARRAY_SIZE(type1_product_matches); i++) { | |
| if (!strcmp(product, type1_product_matches[i])) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static void apple_set_os(void) | |
| { | |
| struct { | |
| unsigned long version; | |
| efi_status_t (__efiapi *set_os_version)(const char *); | |
| efi_status_t (__efiapi *set_os_vendor)(const char *); | |
| } *set_os; | |
| efi_status_t status; | |
| if (!efi_is_64bit() || !apple_match_product_name()) | |
| return; | |
| status = efi_bs_call(locate_protocol, &APPLE_SET_OS_PROTOCOL_GUID, NULL, | |
| (void **)&set_os); | |
| if (status != EFI_SUCCESS) | |
| return; | |
| if (set_os->version >= 2) { | |
| status = set_os->set_os_vendor("Apple Inc."); | |
| if (status != EFI_SUCCESS) | |
| efi_err("Failed to set OS vendor via apple_set_os\n"); | |
| } | |
| if (set_os->version > 0) { | |
| /* The version being set doesn't seem to matter */ | |
| status = set_os->set_os_version("Mac OS X 10.9"); | |
| if (status != EFI_SUCCESS) | |
| efi_err("Failed to set OS version via apple_set_os\n"); | |
| } | |
| } | |
| efi_status_t efi_adjust_memory_range_protection(unsigned long start, | |
| unsigned long size) | |
| { | |
| efi_status_t status; | |
| efi_gcd_memory_space_desc_t desc; | |
| unsigned long end, next; | |
| unsigned long rounded_start, rounded_end; | |
| unsigned long unprotect_start, unprotect_size; | |
| rounded_start = rounddown(start, EFI_PAGE_SIZE); | |
| rounded_end = roundup(start + size, EFI_PAGE_SIZE); | |
| if (memattr != NULL) { | |
| status = efi_call_proto(memattr, set_memory_attributes, | |
| rounded_start, | |
| rounded_end - rounded_start, | |
| EFI_MEMORY_RO); | |
| if (status != EFI_SUCCESS) { | |
| efi_warn("Failed to set EFI_MEMORY_RO attribute\n"); | |
| return status; | |
| } | |
| status = efi_call_proto(memattr, clear_memory_attributes, | |
| rounded_start, | |
| rounded_end - rounded_start, | |
| EFI_MEMORY_XP); | |
| if (status != EFI_SUCCESS) | |
| efi_warn("Failed to clear EFI_MEMORY_XP attribute\n"); | |
| return status; | |
| } | |
| if (efi_dxe_table == NULL) | |
| return EFI_SUCCESS; | |
| /* | |
| * Don't modify memory region attributes, if they are | |
| * already suitable, to lower the possibility to | |
| * encounter firmware bugs. | |
| */ | |
| for (end = start + size; start < end; start = next) { | |
| status = efi_dxe_call(get_memory_space_descriptor, start, &desc); | |
| if (status != EFI_SUCCESS) | |
| break; | |
| next = desc.base_address + desc.length; | |
| /* | |
| * Only system memory and more reliable memory are suitable for | |
| * trampoline/kernel image placement. So only those memory types | |
| * may need to have attributes modified. | |
| */ | |
| if ((desc.gcd_memory_type != EfiGcdMemoryTypeSystemMemory && | |
| desc.gcd_memory_type != EfiGcdMemoryTypeMoreReliable) || | |
| (desc.attributes & (EFI_MEMORY_RO | EFI_MEMORY_XP)) == 0) | |
| continue; | |
| unprotect_start = max(rounded_start, (unsigned long)desc.base_address); | |
| unprotect_size = min(rounded_end, next) - unprotect_start; | |
| status = efi_dxe_call(set_memory_space_attributes, | |
| unprotect_start, unprotect_size, | |
| EFI_MEMORY_WB); | |
| if (status != EFI_SUCCESS) { | |
| efi_warn("Unable to unprotect memory range [%08lx,%08lx]: %lx\n", | |
| unprotect_start, | |
| unprotect_start + unprotect_size, | |
| status); | |
| break; | |
| } | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| static void setup_unaccepted_memory(void) | |
| { | |
| efi_guid_t mem_acceptance_proto = OVMF_SEV_MEMORY_ACCEPTANCE_PROTOCOL_GUID; | |
| sev_memory_acceptance_protocol_t *proto; | |
| efi_status_t status; | |
| if (!IS_ENABLED(CONFIG_UNACCEPTED_MEMORY)) | |
| return; | |
| /* | |
| * Enable unaccepted memory before calling exit boot services in order | |
| * for the UEFI to not accept all memory on EBS. | |
| */ | |
| status = efi_bs_call(locate_protocol, &mem_acceptance_proto, NULL, | |
| (void **)&proto); | |
| if (status != EFI_SUCCESS) | |
| return; | |
| status = efi_call_proto(proto, allow_unaccepted_memory); | |
| if (status != EFI_SUCCESS) | |
| efi_err("Memory acceptance protocol failed\n"); | |
| } | |
| static efi_char16_t *efistub_fw_vendor(void) | |
| { | |
| unsigned long vendor = efi_table_attr(efi_system_table, fw_vendor); | |
| return (efi_char16_t *)vendor; | |
| } | |
| static const efi_char16_t apple[] = L"Apple"; | |
| static void setup_quirks(struct boot_params *boot_params) | |
| { | |
| if (!memcmp(efistub_fw_vendor(), apple, sizeof(apple))) { | |
| if (IS_ENABLED(CONFIG_APPLE_PROPERTIES)) | |
| retrieve_apple_device_properties(boot_params); | |
| apple_set_os(); | |
| } | |
| } | |
| static void setup_graphics(struct boot_params *boot_params) | |
| { | |
| struct screen_info *si = memset(&boot_params->screen_info, 0, sizeof(*si)); | |
| struct edid_info *edid = memset(&boot_params->edid_info, 0, sizeof(*edid)); | |
| efi_setup_graphics(si, edid); | |
| } | |
| static void __noreturn efi_exit(efi_handle_t handle, efi_status_t status) | |
| { | |
| efi_bs_call(exit, handle, status, 0, NULL); | |
| for(;;) | |
| asm("hlt"); | |
| } | |
| /* | |
| * Because the x86 boot code expects to be passed a boot_params we | |
| * need to create one ourselves (usually the bootloader would create | |
| * one for us). | |
| */ | |
| static efi_status_t efi_allocate_bootparams(efi_handle_t handle, | |
| struct boot_params **bp) | |
| { | |
| efi_guid_t proto = LOADED_IMAGE_PROTOCOL_GUID; | |
| struct boot_params *boot_params; | |
| struct setup_header *hdr; | |
| efi_status_t status; | |
| unsigned long alloc; | |
| char *cmdline_ptr; | |
| status = efi_bs_call(handle_protocol, handle, &proto, (void **)&image); | |
| if (status != EFI_SUCCESS) { | |
| efi_err("Failed to get handle for LOADED_IMAGE_PROTOCOL\n"); | |
| return status; | |
| } | |
| status = efi_allocate_pages(PARAM_SIZE, &alloc, ULONG_MAX); | |
| if (status != EFI_SUCCESS) | |
| return status; | |
| boot_params = memset((void *)alloc, 0x0, PARAM_SIZE); | |
| hdr = &boot_params->hdr; | |
| /* Assign the setup_header fields that the kernel actually cares about */ | |
| hdr->root_flags = 1; | |
| hdr->vid_mode = 0xffff; | |
| hdr->type_of_loader = 0x21; | |
| hdr->initrd_addr_max = INT_MAX; | |
| /* Convert unicode cmdline to ascii */ | |
| cmdline_ptr = efi_convert_cmdline(image); | |
| if (!cmdline_ptr) { | |
| efi_free(PARAM_SIZE, alloc); | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| efi_set_u64_split((unsigned long)cmdline_ptr, &hdr->cmd_line_ptr, | |
| &boot_params->ext_cmd_line_ptr); | |
| *bp = boot_params; | |
| return EFI_SUCCESS; | |
| } | |
| static void add_e820ext(struct boot_params *params, | |
| struct setup_data *e820ext, u32 nr_entries) | |
| { | |
| struct setup_data *data; | |
| e820ext->type = SETUP_E820_EXT; | |
| e820ext->len = nr_entries * sizeof(struct boot_e820_entry); | |
| e820ext->next = 0; | |
| data = (struct setup_data *)(unsigned long)params->hdr.setup_data; | |
| while (data && data->next) | |
| data = (struct setup_data *)(unsigned long)data->next; | |
| if (data) | |
| data->next = (unsigned long)e820ext; | |
| else | |
| params->hdr.setup_data = (unsigned long)e820ext; | |
| } | |
| static efi_status_t | |
| setup_e820(struct boot_params *params, struct setup_data *e820ext, u32 e820ext_size) | |
| { | |
| struct boot_e820_entry *entry = params->e820_table; | |
| struct efi_info *efi = ¶ms->efi_info; | |
| struct boot_e820_entry *prev = NULL; | |
| u32 nr_entries; | |
| u32 nr_desc; | |
| int i; | |
| nr_entries = 0; | |
| nr_desc = efi->efi_memmap_size / efi->efi_memdesc_size; | |
| for (i = 0; i < nr_desc; i++) { | |
| efi_memory_desc_t *d; | |
| unsigned int e820_type = 0; | |
| unsigned long m = efi->efi_memmap; | |
| #ifdef CONFIG_X86_64 | |
| m |= (u64)efi->efi_memmap_hi << 32; | |
| #endif | |
| d = efi_memdesc_ptr(m, efi->efi_memdesc_size, i); | |
| switch (d->type) { | |
| case EFI_RESERVED_TYPE: | |
| case EFI_RUNTIME_SERVICES_CODE: | |
| case EFI_RUNTIME_SERVICES_DATA: | |
| case EFI_MEMORY_MAPPED_IO: | |
| case EFI_MEMORY_MAPPED_IO_PORT_SPACE: | |
| case EFI_PAL_CODE: | |
| e820_type = E820_TYPE_RESERVED; | |
| break; | |
| case EFI_UNUSABLE_MEMORY: | |
| e820_type = E820_TYPE_UNUSABLE; | |
| break; | |
| case EFI_ACPI_RECLAIM_MEMORY: | |
| e820_type = E820_TYPE_ACPI; | |
| break; | |
| case EFI_LOADER_CODE: | |
| case EFI_LOADER_DATA: | |
| case EFI_BOOT_SERVICES_CODE: | |
| case EFI_BOOT_SERVICES_DATA: | |
| case EFI_CONVENTIONAL_MEMORY: | |
| if (efi_soft_reserve_enabled() && | |
| (d->attribute & EFI_MEMORY_SP)) | |
| e820_type = E820_TYPE_SOFT_RESERVED; | |
| else | |
| e820_type = E820_TYPE_RAM; | |
| break; | |
| case EFI_ACPI_MEMORY_NVS: | |
| e820_type = E820_TYPE_NVS; | |
| break; | |
| case EFI_PERSISTENT_MEMORY: | |
| e820_type = E820_TYPE_PMEM; | |
| break; | |
| case EFI_UNACCEPTED_MEMORY: | |
| if (!IS_ENABLED(CONFIG_UNACCEPTED_MEMORY)) | |
| continue; | |
| e820_type = E820_TYPE_RAM; | |
| process_unaccepted_memory(d->phys_addr, | |
| d->phys_addr + PAGE_SIZE * d->num_pages); | |
| break; | |
| default: | |
| continue; | |
| } | |
| /* Merge adjacent mappings */ | |
| if (prev && prev->type == e820_type && | |
| (prev->addr + prev->size) == d->phys_addr) { | |
| prev->size += d->num_pages << 12; | |
| continue; | |
| } | |
| if (nr_entries == ARRAY_SIZE(params->e820_table)) { | |
| u32 need = (nr_desc - i) * sizeof(struct e820_entry) + | |
| sizeof(struct setup_data); | |
| if (!e820ext || e820ext_size < need) | |
| return EFI_BUFFER_TOO_SMALL; | |
| /* boot_params map full, switch to e820 extended */ | |
| entry = (struct boot_e820_entry *)e820ext->data; | |
| } | |
| entry->addr = d->phys_addr; | |
| entry->size = d->num_pages << PAGE_SHIFT; | |
| entry->type = e820_type; | |
| prev = entry++; | |
| nr_entries++; | |
| } | |
| if (nr_entries > ARRAY_SIZE(params->e820_table)) { | |
| u32 nr_e820ext = nr_entries - ARRAY_SIZE(params->e820_table); | |
| add_e820ext(params, e820ext, nr_e820ext); | |
| nr_entries -= nr_e820ext; | |
| } | |
| params->e820_entries = (u8)nr_entries; | |
| return EFI_SUCCESS; | |
| } | |
| static efi_status_t alloc_e820ext(u32 nr_desc, struct setup_data **e820ext, | |
| u32 *e820ext_size) | |
| { | |
| efi_status_t status; | |
| unsigned long size; | |
| size = sizeof(struct setup_data) + | |
| sizeof(struct e820_entry) * nr_desc; | |
| if (*e820ext) { | |
| efi_bs_call(free_pool, *e820ext); | |
| *e820ext = NULL; | |
| *e820ext_size = 0; | |
| } | |
| status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, size, | |
| (void **)e820ext); | |
| if (status == EFI_SUCCESS) | |
| *e820ext_size = size; | |
| return status; | |
| } | |
| static efi_status_t allocate_e820(struct boot_params *params, | |
| struct setup_data **e820ext, | |
| u32 *e820ext_size) | |
| { | |
| struct efi_boot_memmap *map __free(efi_pool) = NULL; | |
| efi_status_t status; | |
| __u32 nr_desc; | |
| status = efi_get_memory_map(&map, false); | |
| if (status != EFI_SUCCESS) | |
| return status; | |
| nr_desc = map->map_size / map->desc_size; | |
| if (nr_desc > ARRAY_SIZE(params->e820_table) - EFI_MMAP_NR_SLACK_SLOTS) { | |
| u32 nr_e820ext = nr_desc - ARRAY_SIZE(params->e820_table) + | |
| EFI_MMAP_NR_SLACK_SLOTS; | |
| status = alloc_e820ext(nr_e820ext, e820ext, e820ext_size); | |
| if (status != EFI_SUCCESS) | |
| return status; | |
| } | |
| if (IS_ENABLED(CONFIG_UNACCEPTED_MEMORY)) | |
| return allocate_unaccepted_bitmap(nr_desc, map); | |
| return EFI_SUCCESS; | |
| } | |
| struct exit_boot_struct { | |
| struct boot_params *boot_params; | |
| struct efi_info *efi; | |
| }; | |
| static efi_status_t exit_boot_func(struct efi_boot_memmap *map, | |
| void *priv) | |
| { | |
| const char *signature; | |
| struct exit_boot_struct *p = priv; | |
| signature = efi_is_64bit() ? EFI64_LOADER_SIGNATURE | |
| : EFI32_LOADER_SIGNATURE; | |
| memcpy(&p->efi->efi_loader_signature, signature, sizeof(__u32)); | |
| efi_set_u64_split((unsigned long)efi_system_table, | |
| &p->efi->efi_systab, &p->efi->efi_systab_hi); | |
| p->efi->efi_memdesc_size = map->desc_size; | |
| p->efi->efi_memdesc_version = map->desc_ver; | |
| efi_set_u64_split((unsigned long)map->map, | |
| &p->efi->efi_memmap, &p->efi->efi_memmap_hi); | |
| p->efi->efi_memmap_size = map->map_size; | |
| return EFI_SUCCESS; | |
| } | |
| static efi_status_t exit_boot(struct boot_params *boot_params, void *handle) | |
| { | |
| struct setup_data *e820ext = NULL; | |
| __u32 e820ext_size = 0; | |
| efi_status_t status; | |
| struct exit_boot_struct priv; | |
| priv.boot_params = boot_params; | |
| priv.efi = &boot_params->efi_info; | |
| status = allocate_e820(boot_params, &e820ext, &e820ext_size); | |
| if (status != EFI_SUCCESS) | |
| return status; | |
| /* Might as well exit boot services now */ | |
| status = efi_exit_boot_services(handle, &priv, exit_boot_func); | |
| if (status != EFI_SUCCESS) | |
| return status; | |
| /* Historic? */ | |
| boot_params->alt_mem_k = 32 * 1024; | |
| status = setup_e820(boot_params, e820ext, e820ext_size); | |
| if (status != EFI_SUCCESS) | |
| return status; | |
| return EFI_SUCCESS; | |
| } | |
| static bool have_unsupported_snp_features(void) | |
| { | |
| u64 unsupported; | |
| unsupported = snp_get_unsupported_features(sev_get_status()); | |
| if (unsupported) { | |
| efi_err("Unsupported SEV-SNP features detected: 0x%llx\n", | |
| unsupported); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static void efi_get_seed(void *seed, int size) | |
| { | |
| efi_get_random_bytes(size, seed); | |
| /* | |
| * This only updates seed[0] when running on 32-bit, but in that case, | |
| * seed[1] is not used anyway, as there is no virtual KASLR on 32-bit. | |
| */ | |
| *(unsigned long *)seed ^= kaslr_get_random_long("EFI"); | |
| } | |
| static void error(char *str) | |
| { | |
| efi_warn("Decompression failed: %s\n", str); | |
| } | |
| static const char *cmdline_memmap_override; | |
| static efi_status_t parse_options(const char *cmdline) | |
| { | |
| static const char opts[][14] = { | |
| "mem=", "memmap=", "hugepages=" | |
| }; | |
| for (int i = 0; i < ARRAY_SIZE(opts); i++) { | |
| const char *p = strstr(cmdline, opts[i]); | |
| if (p == cmdline || (p > cmdline && isspace(p[-1]))) { | |
| cmdline_memmap_override = opts[i]; | |
| break; | |
| } | |
| } | |
| return efi_parse_options(cmdline); | |
| } | |
| static efi_status_t efi_decompress_kernel(unsigned long *kernel_entry, | |
| struct boot_params *boot_params) | |
| { | |
| unsigned long virt_addr = LOAD_PHYSICAL_ADDR; | |
| unsigned long addr, alloc_size, entry; | |
| efi_status_t status; | |
| u32 seed[2] = {}; | |
| boot_params_ptr = boot_params; | |
| /* determine the required size of the allocation */ | |
| alloc_size = ALIGN(max_t(unsigned long, output_len, kernel_total_size), | |
| MIN_KERNEL_ALIGN); | |
| if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && !efi_nokaslr) { | |
| u64 range = KERNEL_IMAGE_SIZE - LOAD_PHYSICAL_ADDR - kernel_total_size; | |
| static const efi_char16_t ami[] = L"American Megatrends"; | |
| efi_get_seed(seed, sizeof(seed)); | |
| virt_addr += (range * seed[1]) >> 32; | |
| virt_addr &= ~(CONFIG_PHYSICAL_ALIGN - 1); | |
| /* | |
| * Older Dell systems with AMI UEFI firmware v2.0 may hang | |
| * while decompressing the kernel if physical address | |
| * randomization is enabled. | |
| * | |
| * https://bugzilla.kernel.org/show_bug.cgi?id=218173 | |
| */ | |
| if (efi_system_table->hdr.revision <= EFI_2_00_SYSTEM_TABLE_REVISION && | |
| !memcmp(efistub_fw_vendor(), ami, sizeof(ami))) { | |
| efi_debug("AMI firmware v2.0 or older detected - disabling physical KASLR\n"); | |
| seed[0] = 0; | |
| } else if (cmdline_memmap_override) { | |
| efi_info("%s detected on the kernel command line - disabling physical KASLR\n", | |
| cmdline_memmap_override); | |
| seed[0] = 0; | |
| } | |
| boot_params->hdr.loadflags |= KASLR_FLAG; | |
| } | |
| status = efi_random_alloc(alloc_size, CONFIG_PHYSICAL_ALIGN, &addr, | |
| seed[0], EFI_LOADER_CODE, | |
| LOAD_PHYSICAL_ADDR, | |
| EFI_X86_KERNEL_ALLOC_LIMIT); | |
| if (status != EFI_SUCCESS) | |
| return status; | |
| entry = decompress_kernel((void *)addr, virt_addr, error); | |
| if (entry == ULONG_MAX) { | |
| efi_free(alloc_size, addr); | |
| return EFI_LOAD_ERROR; | |
| } | |
| *kernel_entry = addr + entry; | |
| return efi_adjust_memory_range_protection(addr, kernel_text_size) ?: | |
| efi_adjust_memory_range_protection(addr + kernel_inittext_offset, | |
| kernel_inittext_size); | |
| } | |
| static void __noreturn enter_kernel(unsigned long kernel_addr, | |
| struct boot_params *boot_params) | |
| { | |
| /* enter decompressed kernel with boot_params pointer in RSI/ESI */ | |
| asm("jmp *%0"::"r"(kernel_addr), "S"(boot_params)); | |
| unreachable(); | |
| } | |
| /* | |
| * On success, this routine will jump to the relocated image directly and never | |
| * return. On failure, it will exit to the firmware via efi_exit() instead of | |
| * returning. | |
| */ | |
| void __noreturn efi_stub_entry(efi_handle_t handle, | |
| efi_system_table_t *sys_table_arg, | |
| struct boot_params *boot_params) | |
| { | |
| efi_guid_t guid = EFI_MEMORY_ATTRIBUTE_PROTOCOL_GUID; | |
| const struct linux_efi_initrd *initrd = NULL; | |
| unsigned long kernel_entry; | |
| struct setup_header *hdr; | |
| efi_status_t status; | |
| efi_system_table = sys_table_arg; | |
| /* Check if we were booted by the EFI firmware */ | |
| if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) | |
| efi_exit(handle, EFI_INVALID_PARAMETER); | |
| if (!IS_ENABLED(CONFIG_EFI_HANDOVER_PROTOCOL) || !boot_params) { | |
| status = efi_allocate_bootparams(handle, &boot_params); | |
| if (status != EFI_SUCCESS) | |
| efi_exit(handle, status); | |
| } | |
| hdr = &boot_params->hdr; | |
| if (have_unsupported_snp_features()) | |
| efi_exit(handle, EFI_UNSUPPORTED); | |
| if (IS_ENABLED(CONFIG_EFI_DXE_MEM_ATTRIBUTES)) { | |
| efi_dxe_table = get_efi_config_table(EFI_DXE_SERVICES_TABLE_GUID); | |
| if (efi_dxe_table && | |
| efi_dxe_table->hdr.signature != EFI_DXE_SERVICES_TABLE_SIGNATURE) { | |
| efi_warn("Ignoring DXE services table: invalid signature\n"); | |
| efi_dxe_table = NULL; | |
| } | |
| } | |
| /* grab the memory attributes protocol if it exists */ | |
| efi_bs_call(locate_protocol, &guid, NULL, (void **)&memattr); | |
| status = efi_setup_5level_paging(); | |
| if (status != EFI_SUCCESS) { | |
| efi_err("efi_setup_5level_paging() failed!\n"); | |
| goto fail; | |
| } | |
| #ifdef CONFIG_CMDLINE_BOOL | |
| status = parse_options(CONFIG_CMDLINE); | |
| if (status != EFI_SUCCESS) { | |
| efi_err("Failed to parse options\n"); | |
| goto fail; | |
| } | |
| #endif | |
| if (!IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) { | |
| unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr | | |
| ((u64)boot_params->ext_cmd_line_ptr << 32)); | |
| status = parse_options((char *)cmdline_paddr); | |
| if (status != EFI_SUCCESS) { | |
| efi_err("Failed to parse options\n"); | |
| goto fail; | |
| } | |
| } | |
| if (efi_mem_encrypt > 0) | |
| hdr->xloadflags |= XLF_MEM_ENCRYPTION; | |
| status = efi_decompress_kernel(&kernel_entry, boot_params); | |
| if (status != EFI_SUCCESS) { | |
| efi_err("Failed to decompress kernel\n"); | |
| goto fail; | |
| } | |
| /* | |
| * At this point, an initrd may already have been loaded by the | |
| * bootloader and passed via bootparams. We permit an initrd loaded | |
| * from the LINUX_EFI_INITRD_MEDIA_GUID device path to supersede it. | |
| * | |
| * If the device path is not present, any command-line initrd= | |
| * arguments will be processed only if image is not NULL, which will be | |
| * the case only if we were loaded via the PE entry point. | |
| */ | |
| status = efi_load_initrd(image, hdr->initrd_addr_max, ULONG_MAX, | |
| &initrd); | |
| if (status != EFI_SUCCESS) | |
| goto fail; | |
| if (initrd && initrd->size > 0) { | |
| efi_set_u64_split(initrd->base, &hdr->ramdisk_image, | |
| &boot_params->ext_ramdisk_image); | |
| efi_set_u64_split(initrd->size, &hdr->ramdisk_size, | |
| &boot_params->ext_ramdisk_size); | |
| } | |
| /* | |
| * If the boot loader gave us a value for secure_boot then we use that, | |
| * otherwise we ask the BIOS. | |
| */ | |
| if (boot_params->secure_boot == efi_secureboot_mode_unset) | |
| boot_params->secure_boot = efi_get_secureboot(); | |
| /* Ask the firmware to clear memory on unclean shutdown */ | |
| efi_enable_reset_attack_mitigation(); | |
| efi_random_get_seed(); | |
| efi_retrieve_eventlog(); | |
| setup_graphics(boot_params); | |
| setup_efi_pci(boot_params); | |
| setup_quirks(boot_params); | |
| setup_unaccepted_memory(); | |
| status = exit_boot(boot_params, handle); | |
| if (status != EFI_SUCCESS) { | |
| efi_err("exit_boot() failed!\n"); | |
| goto fail; | |
| } | |
| /* | |
| * Call the SEV init code while still running with the firmware's | |
| * GDT/IDT, so #VC exceptions will be handled by EFI. | |
| */ | |
| sev_enable(boot_params); | |
| efi_5level_switch(); | |
| enter_kernel(kernel_entry, boot_params); | |
| fail: | |
| efi_err("efi_stub_entry() failed!\n"); | |
| efi_exit(handle, status); | |
| } | |
| efi_status_t __efiapi efi_pe_entry(efi_handle_t handle, | |
| efi_system_table_t *sys_table_arg) | |
| { | |
| efi_stub_entry(handle, sys_table_arg, NULL); | |
| } | |
| #ifdef CONFIG_EFI_HANDOVER_PROTOCOL | |
| void efi_handover_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg, | |
| struct boot_params *boot_params) | |
| { | |
| memset(_bss, 0, _ebss - _bss); | |
| efi_stub_entry(handle, sys_table_arg, boot_params); | |
| } | |
| #ifndef CONFIG_EFI_MIXED | |
| extern __alias(efi_handover_entry) | |
| void efi32_stub_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg, | |
| struct boot_params *boot_params); | |
| extern __alias(efi_handover_entry) | |
| void efi64_stub_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg, | |
| struct boot_params *boot_params); | |
| #endif | |
| #endif |