| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2016 Cavium, Inc. | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/firmware.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/pci.h> | |
| #include <linux/printk.h> | |
| #include "cptpf.h" | |
| #define DRV_NAME "thunder-cpt" | |
| #define DRV_VERSION "1.0" | |
| static u32 num_vfs = 4; /* Default 4 VF enabled */ | |
| module_param(num_vfs, uint, 0444); | |
| MODULE_PARM_DESC(num_vfs, "Number of VFs to enable(1-16)"); | |
| /* | |
| * Disable cores specified by coremask | |
| */ | |
| static void cpt_disable_cores(struct cpt_device *cpt, u64 coremask, | |
| u8 type, u8 grp) | |
| { | |
| u64 pf_exe_ctl; | |
| u32 timeout = 100; | |
| u64 grpmask = 0; | |
| struct device *dev = &cpt->pdev->dev; | |
| if (type == AE_TYPES) | |
| coremask = (coremask << cpt->max_se_cores); | |
| /* Disengage the cores from groups */ | |
| grpmask = cpt_read_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp)); | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp), | |
| (grpmask & ~coremask)); | |
| udelay(CSR_DELAY); | |
| grp = cpt_read_csr64(cpt->reg_base, CPTX_PF_EXEC_BUSY(0)); | |
| while (grp & coremask) { | |
| dev_err(dev, "Cores still busy %llx", coremask); | |
| grp = cpt_read_csr64(cpt->reg_base, | |
| CPTX_PF_EXEC_BUSY(0)); | |
| if (!timeout--) | |
| break; | |
| udelay(CSR_DELAY); | |
| } | |
| /* Disable the cores */ | |
| pf_exe_ctl = cpt_read_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0)); | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0), | |
| (pf_exe_ctl & ~coremask)); | |
| udelay(CSR_DELAY); | |
| } | |
| /* | |
| * Enable cores specified by coremask | |
| */ | |
| static void cpt_enable_cores(struct cpt_device *cpt, u64 coremask, | |
| u8 type) | |
| { | |
| u64 pf_exe_ctl; | |
| if (type == AE_TYPES) | |
| coremask = (coremask << cpt->max_se_cores); | |
| pf_exe_ctl = cpt_read_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0)); | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0), | |
| (pf_exe_ctl | coremask)); | |
| udelay(CSR_DELAY); | |
| } | |
| static void cpt_configure_group(struct cpt_device *cpt, u8 grp, | |
| u64 coremask, u8 type) | |
| { | |
| u64 pf_gx_en = 0; | |
| if (type == AE_TYPES) | |
| coremask = (coremask << cpt->max_se_cores); | |
| pf_gx_en = cpt_read_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp)); | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp), | |
| (pf_gx_en | coremask)); | |
| udelay(CSR_DELAY); | |
| } | |
| static void cpt_disable_mbox_interrupts(struct cpt_device *cpt) | |
| { | |
| /* Clear mbox(0) interupts for all vfs */ | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_MBOX_ENA_W1CX(0, 0), ~0ull); | |
| } | |
| static void cpt_disable_ecc_interrupts(struct cpt_device *cpt) | |
| { | |
| /* Clear ecc(0) interupts for all vfs */ | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_ECC0_ENA_W1C(0), ~0ull); | |
| } | |
| static void cpt_disable_exec_interrupts(struct cpt_device *cpt) | |
| { | |
| /* Clear exec interupts for all vfs */ | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_EXEC_ENA_W1C(0), ~0ull); | |
| } | |
| static void cpt_disable_all_interrupts(struct cpt_device *cpt) | |
| { | |
| cpt_disable_mbox_interrupts(cpt); | |
| cpt_disable_ecc_interrupts(cpt); | |
| cpt_disable_exec_interrupts(cpt); | |
| } | |
| static void cpt_enable_mbox_interrupts(struct cpt_device *cpt) | |
| { | |
| /* Set mbox(0) interupts for all vfs */ | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_MBOX_ENA_W1SX(0, 0), ~0ull); | |
| } | |
| static int cpt_load_microcode(struct cpt_device *cpt, struct microcode *mcode) | |
| { | |
| int ret = 0, core = 0, shift = 0; | |
| u32 total_cores = 0; | |
| struct device *dev = &cpt->pdev->dev; | |
| if (!mcode || !mcode->code) { | |
| dev_err(dev, "Either the mcode is null or data is NULL\n"); | |
| return -EINVAL; | |
| } | |
| if (mcode->code_size == 0) { | |
| dev_err(dev, "microcode size is 0\n"); | |
| return -EINVAL; | |
| } | |
| /* Assumes 0-9 are SE cores for UCODE_BASE registers and | |
| * AE core bases follow | |
| */ | |
| if (mcode->is_ae) { | |
| core = CPT_MAX_SE_CORES; /* start couting from 10 */ | |
| total_cores = CPT_MAX_TOTAL_CORES; /* upto 15 */ | |
| } else { | |
| core = 0; /* start couting from 0 */ | |
| total_cores = CPT_MAX_SE_CORES; /* upto 9 */ | |
| } | |
| /* Point to microcode for each core of the group */ | |
| for (; core < total_cores ; core++, shift++) { | |
| if (mcode->core_mask & (1 << shift)) { | |
| cpt_write_csr64(cpt->reg_base, | |
| CPTX_PF_ENGX_UCODE_BASE(0, core), | |
| (u64)mcode->phys_base); | |
| } | |
| } | |
| return ret; | |
| } | |
| static int do_cpt_init(struct cpt_device *cpt, struct microcode *mcode) | |
| { | |
| int ret = 0; | |
| struct device *dev = &cpt->pdev->dev; | |
| /* Make device not ready */ | |
| cpt->flags &= ~CPT_FLAG_DEVICE_READY; | |
| /* Disable All PF interrupts */ | |
| cpt_disable_all_interrupts(cpt); | |
| /* Calculate mcode group and coremasks */ | |
| if (mcode->is_ae) { | |
| if (mcode->num_cores > cpt->max_ae_cores) { | |
| dev_err(dev, "Requested for more cores than available AE cores\n"); | |
| ret = -EINVAL; | |
| goto cpt_init_fail; | |
| } | |
| if (cpt->next_group >= CPT_MAX_CORE_GROUPS) { | |
| dev_err(dev, "Can't load, all eight microcode groups in use"); | |
| return -ENFILE; | |
| } | |
| mcode->group = cpt->next_group; | |
| /* Convert requested cores to mask */ | |
| mcode->core_mask = GENMASK(mcode->num_cores, 0); | |
| cpt_disable_cores(cpt, mcode->core_mask, AE_TYPES, | |
| mcode->group); | |
| /* Load microcode for AE engines */ | |
| ret = cpt_load_microcode(cpt, mcode); | |
| if (ret) { | |
| dev_err(dev, "Microcode load Failed for %s\n", | |
| mcode->version); | |
| goto cpt_init_fail; | |
| } | |
| cpt->next_group++; | |
| /* Configure group mask for the mcode */ | |
| cpt_configure_group(cpt, mcode->group, mcode->core_mask, | |
| AE_TYPES); | |
| /* Enable AE cores for the group mask */ | |
| cpt_enable_cores(cpt, mcode->core_mask, AE_TYPES); | |
| } else { | |
| if (mcode->num_cores > cpt->max_se_cores) { | |
| dev_err(dev, "Requested for more cores than available SE cores\n"); | |
| ret = -EINVAL; | |
| goto cpt_init_fail; | |
| } | |
| if (cpt->next_group >= CPT_MAX_CORE_GROUPS) { | |
| dev_err(dev, "Can't load, all eight microcode groups in use"); | |
| return -ENFILE; | |
| } | |
| mcode->group = cpt->next_group; | |
| /* Covert requested cores to mask */ | |
| mcode->core_mask = GENMASK(mcode->num_cores, 0); | |
| cpt_disable_cores(cpt, mcode->core_mask, SE_TYPES, | |
| mcode->group); | |
| /* Load microcode for SE engines */ | |
| ret = cpt_load_microcode(cpt, mcode); | |
| if (ret) { | |
| dev_err(dev, "Microcode load Failed for %s\n", | |
| mcode->version); | |
| goto cpt_init_fail; | |
| } | |
| cpt->next_group++; | |
| /* Configure group mask for the mcode */ | |
| cpt_configure_group(cpt, mcode->group, mcode->core_mask, | |
| SE_TYPES); | |
| /* Enable SE cores for the group mask */ | |
| cpt_enable_cores(cpt, mcode->core_mask, SE_TYPES); | |
| } | |
| /* Enabled PF mailbox interrupts */ | |
| cpt_enable_mbox_interrupts(cpt); | |
| cpt->flags |= CPT_FLAG_DEVICE_READY; | |
| return ret; | |
| cpt_init_fail: | |
| /* Enabled PF mailbox interrupts */ | |
| cpt_enable_mbox_interrupts(cpt); | |
| return ret; | |
| } | |
| struct ucode_header { | |
| u8 version[CPT_UCODE_VERSION_SZ]; | |
| __be32 code_length; | |
| u32 data_length; | |
| u64 sram_address; | |
| }; | |
| static int cpt_ucode_load_fw(struct cpt_device *cpt, const u8 *fw, bool is_ae) | |
| { | |
| const struct firmware *fw_entry; | |
| struct device *dev = &cpt->pdev->dev; | |
| struct ucode_header *ucode; | |
| unsigned int code_length; | |
| struct microcode *mcode; | |
| int j, ret = 0; | |
| ret = request_firmware(&fw_entry, fw, dev); | |
| if (ret) | |
| return ret; | |
| ucode = (struct ucode_header *)fw_entry->data; | |
| mcode = &cpt->mcode[cpt->next_mc_idx]; | |
| memcpy(mcode->version, (u8 *)fw_entry->data, CPT_UCODE_VERSION_SZ); | |
| code_length = ntohl(ucode->code_length); | |
| if (code_length == 0 || code_length >= INT_MAX / 2) { | |
| ret = -EINVAL; | |
| goto fw_release; | |
| } | |
| mcode->code_size = code_length * 2; | |
| mcode->is_ae = is_ae; | |
| mcode->core_mask = 0ULL; | |
| mcode->num_cores = is_ae ? 6 : 10; | |
| /* Allocate DMAable space */ | |
| mcode->code = dma_alloc_coherent(&cpt->pdev->dev, mcode->code_size, | |
| &mcode->phys_base, GFP_KERNEL); | |
| if (!mcode->code) { | |
| dev_err(dev, "Unable to allocate space for microcode"); | |
| ret = -ENOMEM; | |
| goto fw_release; | |
| } | |
| memcpy((void *)mcode->code, (void *)(fw_entry->data + sizeof(*ucode)), | |
| mcode->code_size); | |
| /* Byte swap 64-bit */ | |
| for (j = 0; j < (mcode->code_size / 8); j++) | |
| ((__be64 *)mcode->code)[j] = cpu_to_be64(((u64 *)mcode->code)[j]); | |
| /* MC needs 16-bit swap */ | |
| for (j = 0; j < (mcode->code_size / 2); j++) | |
| ((__be16 *)mcode->code)[j] = cpu_to_be16(((u16 *)mcode->code)[j]); | |
| dev_dbg(dev, "mcode->code_size = %u\n", mcode->code_size); | |
| dev_dbg(dev, "mcode->is_ae = %u\n", mcode->is_ae); | |
| dev_dbg(dev, "mcode->num_cores = %u\n", mcode->num_cores); | |
| dev_dbg(dev, "mcode->code = %llx\n", (u64)mcode->code); | |
| dev_dbg(dev, "mcode->phys_base = %llx\n", mcode->phys_base); | |
| ret = do_cpt_init(cpt, mcode); | |
| if (ret) { | |
| dma_free_coherent(&cpt->pdev->dev, mcode->code_size, | |
| mcode->code, mcode->phys_base); | |
| dev_err(dev, "do_cpt_init failed with ret: %d\n", ret); | |
| goto fw_release; | |
| } | |
| dev_info(dev, "Microcode Loaded %s\n", mcode->version); | |
| mcode->is_mc_valid = 1; | |
| cpt->next_mc_idx++; | |
| fw_release: | |
| release_firmware(fw_entry); | |
| return ret; | |
| } | |
| static int cpt_ucode_load(struct cpt_device *cpt) | |
| { | |
| int ret = 0; | |
| struct device *dev = &cpt->pdev->dev; | |
| ret = cpt_ucode_load_fw(cpt, "cpt8x-mc-ae.out", true); | |
| if (ret) { | |
| dev_err(dev, "ae:cpt_ucode_load failed with ret: %d\n", ret); | |
| return ret; | |
| } | |
| ret = cpt_ucode_load_fw(cpt, "cpt8x-mc-se.out", false); | |
| if (ret) { | |
| dev_err(dev, "se:cpt_ucode_load failed with ret: %d\n", ret); | |
| return ret; | |
| } | |
| return ret; | |
| } | |
| static irqreturn_t cpt_mbx0_intr_handler(int irq, void *cpt_irq) | |
| { | |
| struct cpt_device *cpt = (struct cpt_device *)cpt_irq; | |
| cpt_mbox_intr_handler(cpt, 0); | |
| return IRQ_HANDLED; | |
| } | |
| static void cpt_reset(struct cpt_device *cpt) | |
| { | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_RESET(0), 1); | |
| } | |
| static void cpt_find_max_enabled_cores(struct cpt_device *cpt) | |
| { | |
| union cptx_pf_constants pf_cnsts = {0}; | |
| pf_cnsts.u = cpt_read_csr64(cpt->reg_base, CPTX_PF_CONSTANTS(0)); | |
| cpt->max_se_cores = pf_cnsts.s.se; | |
| cpt->max_ae_cores = pf_cnsts.s.ae; | |
| } | |
| static u32 cpt_check_bist_status(struct cpt_device *cpt) | |
| { | |
| union cptx_pf_bist_status bist_sts = {0}; | |
| bist_sts.u = cpt_read_csr64(cpt->reg_base, | |
| CPTX_PF_BIST_STATUS(0)); | |
| return bist_sts.u; | |
| } | |
| static u64 cpt_check_exe_bist_status(struct cpt_device *cpt) | |
| { | |
| union cptx_pf_exe_bist_status bist_sts = {0}; | |
| bist_sts.u = cpt_read_csr64(cpt->reg_base, | |
| CPTX_PF_EXE_BIST_STATUS(0)); | |
| return bist_sts.u; | |
| } | |
| static void cpt_disable_all_cores(struct cpt_device *cpt) | |
| { | |
| u32 grp, timeout = 100; | |
| struct device *dev = &cpt->pdev->dev; | |
| /* Disengage the cores from groups */ | |
| for (grp = 0; grp < CPT_MAX_CORE_GROUPS; grp++) { | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp), 0); | |
| udelay(CSR_DELAY); | |
| } | |
| grp = cpt_read_csr64(cpt->reg_base, CPTX_PF_EXEC_BUSY(0)); | |
| while (grp) { | |
| dev_err(dev, "Cores still busy"); | |
| grp = cpt_read_csr64(cpt->reg_base, | |
| CPTX_PF_EXEC_BUSY(0)); | |
| if (!timeout--) | |
| break; | |
| udelay(CSR_DELAY); | |
| } | |
| /* Disable the cores */ | |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0), 0); | |
| } | |
| /* | |
| * Ensure all cores are disengaged from all groups by | |
| * calling cpt_disable_all_cores() before calling this | |
| * function. | |
| */ | |
| static void cpt_unload_microcode(struct cpt_device *cpt) | |
| { | |
| u32 grp = 0, core; | |
| /* Free microcode bases and reset group masks */ | |
| for (grp = 0; grp < CPT_MAX_CORE_GROUPS; grp++) { | |
| struct microcode *mcode = &cpt->mcode[grp]; | |
| if (cpt->mcode[grp].code) | |
| dma_free_coherent(&cpt->pdev->dev, mcode->code_size, | |
| mcode->code, mcode->phys_base); | |
| mcode->code = NULL; | |
| } | |
| /* Clear UCODE_BASE registers for all engines */ | |
| for (core = 0; core < CPT_MAX_TOTAL_CORES; core++) | |
| cpt_write_csr64(cpt->reg_base, | |
| CPTX_PF_ENGX_UCODE_BASE(0, core), 0ull); | |
| } | |
| static int cpt_device_init(struct cpt_device *cpt) | |
| { | |
| u64 bist; | |
| struct device *dev = &cpt->pdev->dev; | |
| /* Reset the PF when probed first */ | |
| cpt_reset(cpt); | |
| msleep(100); | |
| /*Check BIST status*/ | |
| bist = (u64)cpt_check_bist_status(cpt); | |
| if (bist) { | |
| dev_err(dev, "RAM BIST failed with code 0x%llx", bist); | |
| return -ENODEV; | |
| } | |
| bist = cpt_check_exe_bist_status(cpt); | |
| if (bist) { | |
| dev_err(dev, "Engine BIST failed with code 0x%llx", bist); | |
| return -ENODEV; | |
| } | |
| /*Get CLK frequency*/ | |
| /*Get max enabled cores */ | |
| cpt_find_max_enabled_cores(cpt); | |
| /*Disable all cores*/ | |
| cpt_disable_all_cores(cpt); | |
| /*Reset device parameters*/ | |
| cpt->next_mc_idx = 0; | |
| cpt->next_group = 0; | |
| /* PF is ready */ | |
| cpt->flags |= CPT_FLAG_DEVICE_READY; | |
| return 0; | |
| } | |
| static int cpt_register_interrupts(struct cpt_device *cpt) | |
| { | |
| int ret; | |
| struct device *dev = &cpt->pdev->dev; | |
| /* Enable MSI-X */ | |
| ret = pci_alloc_irq_vectors(cpt->pdev, CPT_PF_MSIX_VECTORS, | |
| CPT_PF_MSIX_VECTORS, PCI_IRQ_MSIX); | |
| if (ret < 0) { | |
| dev_err(&cpt->pdev->dev, "Request for #%d msix vectors failed\n", | |
| CPT_PF_MSIX_VECTORS); | |
| return ret; | |
| } | |
| /* Register mailbox interrupt handlers */ | |
| ret = request_irq(pci_irq_vector(cpt->pdev, CPT_PF_INT_VEC_E_MBOXX(0)), | |
| cpt_mbx0_intr_handler, 0, "CPT Mbox0", cpt); | |
| if (ret) | |
| goto fail; | |
| /* Enable mailbox interrupt */ | |
| cpt_enable_mbox_interrupts(cpt); | |
| return 0; | |
| fail: | |
| dev_err(dev, "Request irq failed\n"); | |
| pci_disable_msix(cpt->pdev); | |
| return ret; | |
| } | |
| static void cpt_unregister_interrupts(struct cpt_device *cpt) | |
| { | |
| free_irq(pci_irq_vector(cpt->pdev, CPT_PF_INT_VEC_E_MBOXX(0)), cpt); | |
| pci_disable_msix(cpt->pdev); | |
| } | |
| static int cpt_sriov_init(struct cpt_device *cpt, int num_vfs) | |
| { | |
| int pos = 0; | |
| int err; | |
| u16 total_vf_cnt; | |
| struct pci_dev *pdev = cpt->pdev; | |
| pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); | |
| if (!pos) { | |
| dev_err(&pdev->dev, "SRIOV capability is not found in PCIe config space\n"); | |
| return -ENODEV; | |
| } | |
| cpt->num_vf_en = num_vfs; /* User requested VFs */ | |
| pci_read_config_word(pdev, (pos + PCI_SRIOV_TOTAL_VF), &total_vf_cnt); | |
| if (total_vf_cnt < cpt->num_vf_en) | |
| cpt->num_vf_en = total_vf_cnt; | |
| if (!total_vf_cnt) | |
| return 0; | |
| /*Enabled the available VFs */ | |
| err = pci_enable_sriov(pdev, cpt->num_vf_en); | |
| if (err) { | |
| dev_err(&pdev->dev, "SRIOV enable failed, num VF is %d\n", | |
| cpt->num_vf_en); | |
| cpt->num_vf_en = 0; | |
| return err; | |
| } | |
| /* TODO: Optionally enable static VQ priorities feature */ | |
| dev_info(&pdev->dev, "SRIOV enabled, number of VF available %d\n", | |
| cpt->num_vf_en); | |
| cpt->flags |= CPT_FLAG_SRIOV_ENABLED; | |
| return 0; | |
| } | |
| static int cpt_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct cpt_device *cpt; | |
| int err; | |
| if (num_vfs > 16 || num_vfs < 4) { | |
| dev_warn(dev, "Invalid vf count %d, Resetting it to 4(default)\n", | |
| num_vfs); | |
| num_vfs = 4; | |
| } | |
| cpt = devm_kzalloc(dev, sizeof(*cpt), GFP_KERNEL); | |
| if (!cpt) | |
| return -ENOMEM; | |
| pci_set_drvdata(pdev, cpt); | |
| cpt->pdev = pdev; | |
| err = pci_enable_device(pdev); | |
| if (err) { | |
| dev_err(dev, "Failed to enable PCI device\n"); | |
| pci_set_drvdata(pdev, NULL); | |
| return err; | |
| } | |
| err = pci_request_regions(pdev, DRV_NAME); | |
| if (err) { | |
| dev_err(dev, "PCI request regions failed 0x%x\n", err); | |
| goto cpt_err_disable_device; | |
| } | |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48)); | |
| if (err) { | |
| dev_err(dev, "Unable to get usable 48-bit DMA configuration\n"); | |
| goto cpt_err_release_regions; | |
| } | |
| /* MAP PF's configuration registers */ | |
| cpt->reg_base = pcim_iomap(pdev, 0, 0); | |
| if (!cpt->reg_base) { | |
| dev_err(dev, "Cannot map config register space, aborting\n"); | |
| err = -ENOMEM; | |
| goto cpt_err_release_regions; | |
| } | |
| /* CPT device HW initialization */ | |
| cpt_device_init(cpt); | |
| /* Register interrupts */ | |
| err = cpt_register_interrupts(cpt); | |
| if (err) | |
| goto cpt_err_release_regions; | |
| err = cpt_ucode_load(cpt); | |
| if (err) | |
| goto cpt_err_unregister_interrupts; | |
| /* Configure SRIOV */ | |
| err = cpt_sriov_init(cpt, num_vfs); | |
| if (err) | |
| goto cpt_err_unregister_interrupts; | |
| return 0; | |
| cpt_err_unregister_interrupts: | |
| cpt_unregister_interrupts(cpt); | |
| cpt_err_release_regions: | |
| pci_release_regions(pdev); | |
| cpt_err_disable_device: | |
| pci_disable_device(pdev); | |
| pci_set_drvdata(pdev, NULL); | |
| return err; | |
| } | |
| static void cpt_remove(struct pci_dev *pdev) | |
| { | |
| struct cpt_device *cpt = pci_get_drvdata(pdev); | |
| /* Disengage SE and AE cores from all groups*/ | |
| cpt_disable_all_cores(cpt); | |
| /* Unload microcodes */ | |
| cpt_unload_microcode(cpt); | |
| cpt_unregister_interrupts(cpt); | |
| pci_disable_sriov(pdev); | |
| pci_release_regions(pdev); | |
| pci_disable_device(pdev); | |
| pci_set_drvdata(pdev, NULL); | |
| } | |
| static void cpt_shutdown(struct pci_dev *pdev) | |
| { | |
| struct cpt_device *cpt = pci_get_drvdata(pdev); | |
| if (!cpt) | |
| return; | |
| dev_info(&pdev->dev, "Shutdown device %x:%x.\n", | |
| (u32)pdev->vendor, (u32)pdev->device); | |
| cpt_unregister_interrupts(cpt); | |
| pci_release_regions(pdev); | |
| pci_disable_device(pdev); | |
| pci_set_drvdata(pdev, NULL); | |
| } | |
| /* Supported devices */ | |
| static const struct pci_device_id cpt_id_table[] = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, CPT_81XX_PCI_PF_DEVICE_ID) }, | |
| { 0, } /* end of table */ | |
| }; | |
| MODULE_DEVICE_TABLE(pci, cpt_id_table); | |
| static struct pci_driver cpt_pci_driver = { | |
| .name = DRV_NAME, | |
| .id_table = cpt_id_table, | |
| .probe = cpt_probe, | |
| .remove = cpt_remove, | |
| .shutdown = cpt_shutdown, | |
| }; | |
| module_pci_driver(cpt_pci_driver); | |
| MODULE_AUTHOR("George Cherian <george.cherian@cavium.com>"); | |
| MODULE_DESCRIPTION("Cavium Thunder CPT Physical Function Driver"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_VERSION(DRV_VERSION); |