| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/spinlock.h> | |
| #include <linux/percpu.h> | |
| #include <linux/kallsyms.h> | |
| #include <linux/kcore.h> | |
| #include <linux/pgtable.h> | |
| #include <asm/cpu_entry_area.h> | |
| #include <asm/fixmap.h> | |
| #include <asm/desc.h> | |
| #include <asm/kasan.h> | |
| #include <asm/setup.h> | |
| static DEFINE_PER_CPU_PAGE_ALIGNED(struct entry_stack_page, entry_stack_storage); | |
| #ifdef CONFIG_X86_64 | |
| static DEFINE_PER_CPU_PAGE_ALIGNED(struct exception_stacks, exception_stacks); | |
| DEFINE_PER_CPU(struct cea_exception_stacks*, cea_exception_stacks); | |
| static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, _cea_offset); | |
| static __always_inline unsigned int cea_offset(unsigned int cpu) | |
| { | |
| return per_cpu(_cea_offset, cpu); | |
| } | |
| static __init void init_cea_offsets(void) | |
| { | |
| unsigned int max_cea; | |
| unsigned int i, j; | |
| if (!kaslr_enabled()) { | |
| for_each_possible_cpu(i) | |
| per_cpu(_cea_offset, i) = i; | |
| return; | |
| } | |
| max_cea = (CPU_ENTRY_AREA_MAP_SIZE - PAGE_SIZE) / CPU_ENTRY_AREA_SIZE; | |
| /* O(sodding terrible) */ | |
| for_each_possible_cpu(i) { | |
| unsigned int cea; | |
| again: | |
| cea = get_random_u32_below(max_cea); | |
| for_each_possible_cpu(j) { | |
| if (cea_offset(j) == cea) | |
| goto again; | |
| if (i == j) | |
| break; | |
| } | |
| per_cpu(_cea_offset, i) = cea; | |
| } | |
| } | |
| #else /* !X86_64 */ | |
| DECLARE_PER_CPU_PAGE_ALIGNED(struct doublefault_stack, doublefault_stack); | |
| static __always_inline unsigned int cea_offset(unsigned int cpu) | |
| { | |
| return cpu; | |
| } | |
| static inline void init_cea_offsets(void) { } | |
| #endif | |
| /* Is called from entry code, so must be noinstr */ | |
| noinstr struct cpu_entry_area *get_cpu_entry_area(int cpu) | |
| { | |
| unsigned long va = CPU_ENTRY_AREA_PER_CPU + cea_offset(cpu) * CPU_ENTRY_AREA_SIZE; | |
| BUILD_BUG_ON(sizeof(struct cpu_entry_area) % PAGE_SIZE != 0); | |
| return (struct cpu_entry_area *) va; | |
| } | |
| EXPORT_SYMBOL(get_cpu_entry_area); | |
| void cea_set_pte(void *cea_vaddr, phys_addr_t pa, pgprot_t flags) | |
| { | |
| unsigned long va = (unsigned long) cea_vaddr; | |
| pte_t pte = pfn_pte(pa >> PAGE_SHIFT, flags); | |
| /* | |
| * The cpu_entry_area is shared between the user and kernel | |
| * page tables. All of its ptes can safely be global. | |
| * _PAGE_GLOBAL gets reused to help indicate PROT_NONE for | |
| * non-present PTEs, so be careful not to set it in that | |
| * case to avoid confusion. | |
| */ | |
| if (boot_cpu_has(X86_FEATURE_PGE) && | |
| (pgprot_val(flags) & _PAGE_PRESENT)) | |
| pte = pte_set_flags(pte, _PAGE_GLOBAL); | |
| set_pte_vaddr(va, pte); | |
| } | |
| static void __init | |
| cea_map_percpu_pages(void *cea_vaddr, void *ptr, int pages, pgprot_t prot) | |
| { | |
| for ( ; pages; pages--, cea_vaddr+= PAGE_SIZE, ptr += PAGE_SIZE) | |
| cea_set_pte(cea_vaddr, per_cpu_ptr_to_phys(ptr), prot); | |
| } | |
| static void __init percpu_setup_debug_store(unsigned int cpu) | |
| { | |
| #ifdef CONFIG_CPU_SUP_INTEL | |
| unsigned int npages; | |
| void *cea; | |
| if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) | |
| return; | |
| cea = &get_cpu_entry_area(cpu)->cpu_debug_store; | |
| npages = sizeof(struct debug_store) / PAGE_SIZE; | |
| BUILD_BUG_ON(sizeof(struct debug_store) % PAGE_SIZE != 0); | |
| cea_map_percpu_pages(cea, &per_cpu(cpu_debug_store, cpu), npages, | |
| PAGE_KERNEL); | |
| cea = &get_cpu_entry_area(cpu)->cpu_debug_buffers; | |
| /* | |
| * Force the population of PMDs for not yet allocated per cpu | |
| * memory like debug store buffers. | |
| */ | |
| npages = sizeof(struct debug_store_buffers) / PAGE_SIZE; | |
| for (; npages; npages--, cea += PAGE_SIZE) | |
| cea_set_pte(cea, 0, PAGE_NONE); | |
| #endif | |
| } | |
| #ifdef CONFIG_X86_64 | |
| #define cea_map_stack(name) do { \ | |
| npages = sizeof(estacks->name## _stack) / PAGE_SIZE; \ | |
| cea_map_percpu_pages(cea->estacks.name## _stack, \ | |
| estacks->name## _stack, npages, PAGE_KERNEL); \ | |
| } while (0) | |
| static void __init percpu_setup_exception_stacks(unsigned int cpu) | |
| { | |
| struct exception_stacks *estacks = per_cpu_ptr(&exception_stacks, cpu); | |
| struct cpu_entry_area *cea = get_cpu_entry_area(cpu); | |
| unsigned int npages; | |
| BUILD_BUG_ON(sizeof(exception_stacks) % PAGE_SIZE != 0); | |
| per_cpu(cea_exception_stacks, cpu) = &cea->estacks; | |
| /* | |
| * The exceptions stack mappings in the per cpu area are protected | |
| * by guard pages so each stack must be mapped separately. DB2 is | |
| * not mapped; it just exists to catch triple nesting of #DB. | |
| */ | |
| cea_map_stack(DF); | |
| cea_map_stack(NMI); | |
| cea_map_stack(DB); | |
| cea_map_stack(MCE); | |
| if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) { | |
| if (cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT)) { | |
| cea_map_stack(VC); | |
| cea_map_stack(VC2); | |
| } | |
| } | |
| } | |
| #else | |
| static void __init percpu_setup_exception_stacks(unsigned int cpu) | |
| { | |
| struct cpu_entry_area *cea = get_cpu_entry_area(cpu); | |
| cea_map_percpu_pages(&cea->doublefault_stack, | |
| &per_cpu(doublefault_stack, cpu), 1, PAGE_KERNEL); | |
| } | |
| #endif | |
| /* Setup the fixmap mappings only once per-processor */ | |
| static void __init setup_cpu_entry_area(unsigned int cpu) | |
| { | |
| struct cpu_entry_area *cea = get_cpu_entry_area(cpu); | |
| #ifdef CONFIG_X86_64 | |
| /* On 64-bit systems, we use a read-only fixmap GDT and TSS. */ | |
| pgprot_t gdt_prot = PAGE_KERNEL_RO; | |
| pgprot_t tss_prot = PAGE_KERNEL_RO; | |
| #else | |
| /* | |
| * On 32-bit systems, the GDT cannot be read-only because | |
| * our double fault handler uses a task gate, and entering through | |
| * a task gate needs to change an available TSS to busy. If the | |
| * GDT is read-only, that will triple fault. The TSS cannot be | |
| * read-only because the CPU writes to it on task switches. | |
| */ | |
| pgprot_t gdt_prot = PAGE_KERNEL; | |
| pgprot_t tss_prot = PAGE_KERNEL; | |
| #endif | |
| kasan_populate_shadow_for_vaddr(cea, CPU_ENTRY_AREA_SIZE, | |
| early_cpu_to_node(cpu)); | |
| cea_set_pte(&cea->gdt, get_cpu_gdt_paddr(cpu), gdt_prot); | |
| cea_map_percpu_pages(&cea->entry_stack_page, | |
| per_cpu_ptr(&entry_stack_storage, cpu), 1, | |
| PAGE_KERNEL); | |
| /* | |
| * The Intel SDM says (Volume 3, 7.2.1): | |
| * | |
| * Avoid placing a page boundary in the part of the TSS that the | |
| * processor reads during a task switch (the first 104 bytes). The | |
| * processor may not correctly perform address translations if a | |
| * boundary occurs in this area. During a task switch, the processor | |
| * reads and writes into the first 104 bytes of each TSS (using | |
| * contiguous physical addresses beginning with the physical address | |
| * of the first byte of the TSS). So, after TSS access begins, if | |
| * part of the 104 bytes is not physically contiguous, the processor | |
| * will access incorrect information without generating a page-fault | |
| * exception. | |
| * | |
| * There are also a lot of errata involving the TSS spanning a page | |
| * boundary. Assert that we're not doing that. | |
| */ | |
| BUILD_BUG_ON((offsetof(struct tss_struct, x86_tss) ^ | |
| offsetofend(struct tss_struct, x86_tss)) & PAGE_MASK); | |
| BUILD_BUG_ON(sizeof(struct tss_struct) % PAGE_SIZE != 0); | |
| /* | |
| * VMX changes the host TR limit to 0x67 after a VM exit. This is | |
| * okay, since 0x67 covers the size of struct x86_hw_tss. Make sure | |
| * that this is correct. | |
| */ | |
| BUILD_BUG_ON(offsetof(struct tss_struct, x86_tss) != 0); | |
| BUILD_BUG_ON(sizeof(struct x86_hw_tss) != 0x68); | |
| cea_map_percpu_pages(&cea->tss, &per_cpu(cpu_tss_rw, cpu), | |
| sizeof(struct tss_struct) / PAGE_SIZE, tss_prot); | |
| #ifdef CONFIG_X86_32 | |
| per_cpu(cpu_entry_area, cpu) = cea; | |
| #endif | |
| percpu_setup_exception_stacks(cpu); | |
| percpu_setup_debug_store(cpu); | |
| } | |
| static __init void setup_cpu_entry_area_ptes(void) | |
| { | |
| #ifdef CONFIG_X86_32 | |
| unsigned long start, end; | |
| /* The +1 is for the readonly IDT: */ | |
| BUILD_BUG_ON((CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE); | |
| BUG_ON(CPU_ENTRY_AREA_BASE & ~PMD_MASK); | |
| start = CPU_ENTRY_AREA_BASE; | |
| end = start + CPU_ENTRY_AREA_MAP_SIZE; | |
| /* Careful here: start + PMD_SIZE might wrap around */ | |
| for (; start < end && start >= CPU_ENTRY_AREA_BASE; start += PMD_SIZE) | |
| populate_extra_pte(start); | |
| #endif | |
| } | |
| void __init setup_cpu_entry_areas(void) | |
| { | |
| unsigned int cpu; | |
| init_cea_offsets(); | |
| setup_cpu_entry_area_ptes(); | |
| for_each_possible_cpu(cpu) | |
| setup_cpu_entry_area(cpu); | |
| /* | |
| * This is the last essential update to swapper_pgdir which needs | |
| * to be synchronized to initial_page_table on 32bit. | |
| */ | |
| sync_initial_page_table(); | |
| } |