| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) |
| /* |
| * Copyright (C) STMicroelectronics 2025 - All Rights Reserved |
| * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. |
| */ |
| #include <dt-bindings/clock/st,stm32mp25-rcc.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/regulator/st,stm32mp25-regulator.h> |
| #include <dt-bindings/reset/st,stm32mp25-rcc.h> |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a35"; |
| reg = <0>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| power-domains = <&cpu0_pd>; |
| power-domain-names = "psci"; |
| }; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a35-pmu"; |
| interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>; |
| interrupt-parent = <&intc>; |
| }; |
| |
| arm_wdt: watchdog { |
| compatible = "arm,smc-wdt"; |
| arm,smc-id = <0xb200005a>; |
| status = "disabled"; |
| }; |
| |
| clk_dsi_txbyte: clock-0 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| |
| clk_rcbsec: clk-64000000 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <64000000>; |
| }; |
| |
| firmware { |
| optee: optee { |
| compatible = "linaro,optee-tz"; |
| method = "smc"; |
| interrupt-parent = <&intc>; |
| interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| scmi { |
| compatible = "linaro,scmi-optee"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| linaro,optee-channel-id = <0>; |
| |
| scmi_clk: protocol@14 { |
| reg = <0x14>; |
| #clock-cells = <1>; |
| }; |
| |
| scmi_reset: protocol@16 { |
| reg = <0x16>; |
| #reset-cells = <1>; |
| }; |
| |
| scmi_voltd: protocol@17 { |
| reg = <0x17>; |
| |
| scmi_regu: regulators { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| scmi_vddio1: regulator@0 { |
| reg = <VOLTD_SCMI_VDDIO1>; |
| regulator-name = "vddio1"; |
| }; |
| scmi_vddio2: regulator@1 { |
| reg = <VOLTD_SCMI_VDDIO2>; |
| regulator-name = "vddio2"; |
| }; |
| scmi_vddio3: regulator@2 { |
| reg = <VOLTD_SCMI_VDDIO3>; |
| regulator-name = "vddio3"; |
| }; |
| scmi_vddio4: regulator@3 { |
| reg = <VOLTD_SCMI_VDDIO4>; |
| regulator-name = "vddio4"; |
| }; |
| scmi_vdd33ucpd: regulator@5 { |
| reg = <VOLTD_SCMI_UCPD>; |
| regulator-name = "vdd33ucpd"; |
| }; |
| scmi_vdda18adc: regulator@7 { |
| reg = <VOLTD_SCMI_ADC>; |
| regulator-name = "vdda18adc"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| |
| cpu0_pd: power-domain-cpu0 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster_pd>; |
| }; |
| |
| cluster_pd: power-domain-cluster { |
| #power-domain-cells = <0>; |
| power-domains = <&ret_pd>; |
| }; |
| |
| ret_pd: power-domain-retention { |
| #power-domain-cells = <0>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupt-parent = <&intc>; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; |
| always-on; |
| }; |
| |
| soc@0 { |
| compatible = "simple-bus"; |
| ranges = <0x0 0x0 0x0 0x80000000>; |
| interrupt-parent = <&intc>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| hpdma: dma-controller@40400000 { |
| compatible = "st,stm32mp25-dma3"; |
| reg = <0x40400000 0x1000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk CK_SCMI_HPDMA1>; |
| #dma-cells = <3>; |
| }; |
| |
| hpdma2: dma-controller@40410000 { |
| compatible = "st,stm32mp25-dma3"; |
| reg = <0x40410000 0x1000>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk CK_SCMI_HPDMA2>; |
| #dma-cells = <3>; |
| }; |
| |
| hpdma3: dma-controller@40420000 { |
| compatible = "st,stm32mp25-dma3"; |
| reg = <0x40420000 0x1000>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scmi_clk CK_SCMI_HPDMA3>; |
| #dma-cells = <3>; |
| }; |
| |
| rifsc: bus@42080000 { |
| compatible = "st,stm32mp25-rifsc", "simple-bus"; |
| reg = <0x42080000 0x1000>; |
| ranges; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #access-controller-cells = <1>; |
| |
| i2s2: audio-controller@400b0000 { |
| compatible = "st,stm32mp25-i2s"; |
| reg = <0x400b0000 0x400>; |
| #sound-dai-cells = <0>; |
| interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_BUS_SPI2>, <&rcc CK_KER_SPI2>; |
| clock-names = "pclk", "i2sclk"; |
| resets = <&rcc SPI2_R>; |
| dmas = <&hpdma 51 0x43 0x12>, |
| <&hpdma 52 0x43 0x21>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 23>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@400b0000 { |
| compatible = "st,stm32mp25-spi"; |
| reg = <0x400b0000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_SPI2>; |
| resets = <&rcc SPI2_R>; |
| dmas = <&hpdma 51 0x20 0x3012>, |
| <&hpdma 52 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 23>; |
| power-domains = <&cluster_pd>; |
| status = "disabled"; |
| }; |
| |
| i2s3: audio-controller@400c0000 { |
| compatible = "st,stm32mp25-i2s"; |
| reg = <0x400c0000 0x400>; |
| #sound-dai-cells = <0>; |
| interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_BUS_SPI3>, <&rcc CK_KER_SPI3>; |
| clock-names = "pclk", "i2sclk"; |
| resets = <&rcc SPI3_R>; |
| dmas = <&hpdma 53 0x43 0x12>, |
| <&hpdma 54 0x43 0x21>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 24>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@400c0000 { |
| compatible = "st,stm32mp25-spi"; |
| reg = <0x400c0000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_SPI3>; |
| resets = <&rcc SPI3_R>; |
| dmas = <&hpdma 53 0x20 0x3012>, |
| <&hpdma 54 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 24>; |
| power-domains = <&cluster_pd>; |
| status = "disabled"; |
| }; |
| |
| spdifrx: audio-controller@400d0000 { |
| compatible = "st,stm32h7-spdifrx"; |
| reg = <0x400d0000 0x400>; |
| #sound-dai-cells = <0>; |
| clocks = <&rcc CK_KER_SPDIFRX>; |
| clock-names = "kclk"; |
| interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&hpdma 71 0x43 0x212>, |
| <&hpdma 72 0x43 0x212>; |
| dma-names = "rx", "rx-ctrl"; |
| access-controllers = <&rifsc 30>; |
| status = "disabled"; |
| }; |
| |
| usart2: serial@400e0000 { |
| compatible = "st,stm32h7-uart"; |
| reg = <0x400e0000 0x400>; |
| interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_USART2>; |
| dmas = <&hpdma 11 0x20 0x10012>, |
| <&hpdma 12 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 32>; |
| status = "disabled"; |
| }; |
| |
| usart3: serial@400f0000 { |
| compatible = "st,stm32h7-uart"; |
| reg = <0x400f0000 0x400>; |
| interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_USART3>; |
| dmas = <&hpdma 13 0x20 0x10012>, |
| <&hpdma 14 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 33>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@40100000 { |
| compatible = "st,stm32h7-uart"; |
| reg = <0x40100000 0x400>; |
| interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_UART4>; |
| dmas = <&hpdma 15 0x20 0x10012>, |
| <&hpdma 16 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 34>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@40110000 { |
| compatible = "st,stm32h7-uart"; |
| reg = <0x40110000 0x400>; |
| interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_UART5>; |
| dmas = <&hpdma 17 0x20 0x10012>, |
| <&hpdma 18 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 35>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@40120000 { |
| compatible = "st,stm32mp25-i2c"; |
| reg = <0x40120000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-names = "event"; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_I2C1>; |
| resets = <&rcc I2C1_R>; |
| dmas = <&hpdma 27 0x20 0x3012>, |
| <&hpdma 28 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 41>; |
| power-domains = <&cluster_pd>; |
| i2c-analog-filter; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@40130000 { |
| compatible = "st,stm32mp25-i2c"; |
| reg = <0x40130000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-names = "event"; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_I2C2>; |
| resets = <&rcc I2C2_R>; |
| dmas = <&hpdma 30 0x20 0x3012>, |
| <&hpdma 31 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 42>; |
| power-domains = <&cluster_pd>; |
| i2c-analog-filter; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@40180000 { |
| compatible = "st,stm32mp25-i2c"; |
| reg = <0x40180000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-names = "event"; |
| interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_I2C7>; |
| resets = <&rcc I2C7_R>; |
| dmas = <&hpdma 45 0x20 0x3012>, |
| <&hpdma 46 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 47>; |
| power-domains = <&cluster_pd>; |
| i2c-analog-filter; |
| status = "disabled"; |
| }; |
| |
| usart6: serial@40220000 { |
| compatible = "st,stm32h7-uart"; |
| reg = <0x40220000 0x400>; |
| interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_USART6>; |
| dmas = <&hpdma 19 0x20 0x10012>, |
| <&hpdma 20 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 36>; |
| status = "disabled"; |
| }; |
| |
| i2s1: audio-controller@40230000 { |
| compatible = "st,stm32mp25-i2s"; |
| reg = <0x40230000 0x400>; |
| #sound-dai-cells = <0>; |
| interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_BUS_SPI1>, <&rcc CK_KER_SPI1>; |
| clock-names = "pclk", "i2sclk"; |
| resets = <&rcc SPI1_R>; |
| dmas = <&hpdma 49 0x43 0x12>, |
| <&hpdma 50 0x43 0x21>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 22>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@40230000 { |
| compatible = "st,stm32mp25-spi"; |
| reg = <0x40230000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_SPI1>; |
| resets = <&rcc SPI1_R>; |
| dmas = <&hpdma 49 0x20 0x3012>, |
| <&hpdma 50 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 22>; |
| power-domains = <&cluster_pd>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@40240000 { |
| compatible = "st,stm32mp25-spi"; |
| reg = <0x40240000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_SPI4>; |
| resets = <&rcc SPI4_R>; |
| dmas = <&hpdma 55 0x20 0x3012>, |
| <&hpdma 56 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 25>; |
| power-domains = <&cluster_pd>; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@40280000 { |
| compatible = "st,stm32mp25-spi"; |
| reg = <0x40280000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_SPI5>; |
| resets = <&rcc SPI5_R>; |
| dmas = <&hpdma 57 0x20 0x3012>, |
| <&hpdma 58 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 26>; |
| power-domains = <&cluster_pd>; |
| status = "disabled"; |
| }; |
| |
| sai1: sai@40290000 { |
| compatible = "st,stm32mp25-sai"; |
| reg = <0x40290000 0x4>, <0x4029a3f0 0x10>; |
| ranges = <0 0x40290000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&rcc CK_BUS_SAI1>; |
| clock-names = "pclk"; |
| interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&rcc SAI1_R>; |
| access-controllers = <&rifsc 49>; |
| status = "disabled"; |
| |
| sai1a: audio-controller@40290004 { |
| compatible = "st,stm32-sai-sub-a"; |
| reg = <0x4 0x20>; |
| #sound-dai-cells = <0>; |
| clocks = <&rcc CK_KER_SAI1>; |
| clock-names = "sai_ck"; |
| dmas = <&hpdma 73 0x43 0x21>; |
| status = "disabled"; |
| }; |
| |
| sai1b: audio-controller@40290024 { |
| compatible = "st,stm32-sai-sub-b"; |
| reg = <0x24 0x20>; |
| #sound-dai-cells = <0>; |
| clocks = <&rcc CK_KER_SAI1>; |
| clock-names = "sai_ck"; |
| dmas = <&hpdma 74 0x43 0x12>; |
| status = "disabled"; |
| }; |
| }; |
| |
| sai2: sai@402a0000 { |
| compatible = "st,stm32mp25-sai"; |
| reg = <0x402a0000 0x4>, <0x402aa3f0 0x10>; |
| ranges = <0 0x402a0000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&rcc CK_BUS_SAI2>; |
| clock-names = "pclk"; |
| interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&rcc SAI2_R>; |
| access-controllers = <&rifsc 50>; |
| status = "disabled"; |
| |
| sai2a: audio-controller@402a0004 { |
| compatible = "st,stm32-sai-sub-a"; |
| reg = <0x4 0x20>; |
| #sound-dai-cells = <0>; |
| clocks = <&rcc CK_KER_SAI2>; |
| clock-names = "sai_ck"; |
| dmas = <&hpdma 75 0x43 0x21>; |
| status = "disabled"; |
| }; |
| |
| sai2b: audio-controller@402a0024 { |
| compatible = "st,stm32-sai-sub-b"; |
| reg = <0x24 0x20>; |
| #sound-dai-cells = <0>; |
| clocks = <&rcc CK_KER_SAI2>; |
| clock-names = "sai_ck"; |
| dmas = <&hpdma 76 0x43 0x12>; |
| status = "disabled"; |
| }; |
| }; |
| |
| sai3: sai@402b0000 { |
| compatible = "st,stm32mp25-sai"; |
| reg = <0x402b0000 0x4>, <0x402ba3f0 0x10>; |
| ranges = <0 0x402b0000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&rcc CK_BUS_SAI3>; |
| clock-names = "pclk"; |
| interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&rcc SAI3_R>; |
| access-controllers = <&rifsc 51>; |
| status = "disabled"; |
| |
| sai3a: audio-controller@402b0004 { |
| compatible = "st,stm32-sai-sub-a"; |
| reg = <0x4 0x20>; |
| #sound-dai-cells = <0>; |
| clocks = <&rcc CK_KER_SAI3>; |
| clock-names = "sai_ck"; |
| dmas = <&hpdma 77 0x43 0x21>; |
| status = "disabled"; |
| }; |
| |
| sai3b: audio-controller@502b0024 { |
| compatible = "st,stm32-sai-sub-b"; |
| reg = <0x24 0x20>; |
| #sound-dai-cells = <0>; |
| clocks = <&rcc CK_KER_SAI3>; |
| clock-names = "sai_ck"; |
| dmas = <&hpdma 78 0x43 0x12>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usart1: serial@40330000 { |
| compatible = "st,stm32h7-uart"; |
| reg = <0x40330000 0x400>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_USART1>; |
| dmas = <&hpdma 9 0x20 0x10012>, |
| <&hpdma 10 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 31>; |
| status = "disabled"; |
| }; |
| |
| sai4: sai@40340000 { |
| compatible = "st,stm32mp25-sai"; |
| reg = <0x40340000 0x4>, <0x4034a3f0 0x10>; |
| ranges = <0 0x40340000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&rcc CK_BUS_SAI4>; |
| clock-names = "pclk"; |
| interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&rcc SAI4_R>; |
| access-controllers = <&rifsc 52>; |
| status = "disabled"; |
| |
| sai4a: audio-controller@40340004 { |
| compatible = "st,stm32-sai-sub-a"; |
| reg = <0x4 0x20>; |
| #sound-dai-cells = <0>; |
| clocks = <&rcc CK_KER_SAI4>; |
| clock-names = "sai_ck"; |
| dmas = <&hpdma 79 0x63 0x21>; |
| status = "disabled"; |
| }; |
| |
| sai4b: audio-controller@40340024 { |
| compatible = "st,stm32-sai-sub-b"; |
| reg = <0x24 0x20>; |
| #sound-dai-cells = <0>; |
| clocks = <&rcc CK_KER_SAI4>; |
| clock-names = "sai_ck"; |
| dmas = <&hpdma 80 0x43 0x12>; |
| status = "disabled"; |
| }; |
| }; |
| |
| uart7: serial@40370000 { |
| compatible = "st,stm32h7-uart"; |
| reg = <0x40370000 0x400>; |
| interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_UART7>; |
| dmas = <&hpdma 21 0x20 0x10012>, |
| <&hpdma 22 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 37>; |
| status = "disabled"; |
| }; |
| |
| rng: rng@42020000 { |
| compatible = "st,stm32mp25-rng"; |
| reg = <0x42020000 0x400>; |
| clocks = <&clk_rcbsec>, <&rcc CK_BUS_RNG>; |
| clock-names = "core", "bus"; |
| resets = <&rcc RNG_R>; |
| access-controllers = <&rifsc 92>; |
| status = "disabled"; |
| }; |
| |
| spi8: spi@46020000 { |
| compatible = "st,stm32mp25-spi"; |
| reg = <0x46020000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_SPI8>; |
| resets = <&rcc SPI8_R>; |
| dmas = <&hpdma 171 0x20 0x3012>, |
| <&hpdma 172 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 29>; |
| status = "disabled"; |
| }; |
| |
| i2c8: i2c@46040000 { |
| compatible = "st,stm32mp25-i2c"; |
| reg = <0x46040000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-names = "event"; |
| interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_I2C8>; |
| resets = <&rcc I2C8_R>; |
| dmas = <&hpdma 168 0x20 0x3012>, |
| <&hpdma 169 0x20 0x3021>; |
| dma-names = "rx", "tx"; |
| access-controllers = <&rifsc 48>; |
| power-domains = <&cluster_pd>; |
| i2c-analog-filter; |
| status = "disabled"; |
| }; |
| |
| csi: csi@48020000 { |
| compatible = "st,stm32mp25-csi"; |
| reg = <0x48020000 0x2000>; |
| interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&rcc CSI_R>; |
| clocks = <&rcc CK_KER_CSI>, <&rcc CK_KER_CSITXESC>, |
| <&rcc CK_KER_CSIPHY>; |
| clock-names = "pclk", "txesc", "csi2phy"; |
| access-controllers = <&rifsc 86>; |
| power-domains = <&cluster_pd>; |
| status = "disabled"; |
| }; |
| |
| dcmipp: dcmipp@48030000 { |
| compatible = "st,stm32mp25-dcmipp"; |
| reg = <0x48030000 0x1000>; |
| interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&rcc DCMIPP_R>; |
| clocks = <&rcc CK_BUS_DCMIPP>, <&rcc CK_KER_CSI>; |
| clock-names = "kclk", "mclk"; |
| access-controllers = <&rifsc 87>; |
| power-domains = <&cluster_pd>; |
| status = "disabled"; |
| }; |
| |
| sdmmc1: mmc@48220000 { |
| compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell"; |
| reg = <0x48220000 0x400>, <0x44230400 0x8>; |
| arm,primecell-periphid = <0x00353180>; |
| interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rcc CK_KER_SDMMC1 >; |
| clock-names = "apb_pclk"; |
| resets = <&rcc SDMMC1_R>; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| max-frequency = <120000000>; |
| access-controllers = <&rifsc 76>; |
| status = "disabled"; |
| }; |
| |
| ethernet1: ethernet@482c0000 { |
| compatible = "st,stm32mp25-dwmac", "snps,dwmac-5.20"; |
| reg = <0x482c0000 0x4000>; |
| reg-names = "stmmaceth"; |
| interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| clock-names = "stmmaceth", |
| "mac-clk-tx", |
| "mac-clk-rx", |
| "ptp_ref", |
| "ethstp", |
| "eth-ck"; |
| clocks = <&rcc CK_ETH1_MAC>, |
| <&rcc CK_ETH1_TX>, |
| <&rcc CK_ETH1_RX>, |
| <&rcc CK_KER_ETH1PTP>, |
| <&rcc CK_ETH1_STP>, |
| <&rcc CK_KER_ETH1>; |
| snps,axi-config = <&stmmac_axi_config_1>; |
| snps,mixed-burst; |
| snps,mtl-rx-config = <&mtl_rx_setup_1>; |
| snps,mtl-tx-config = <&mtl_tx_setup_1>; |
| snps,pbl = <2>; |
| snps,tso; |
| st,syscon = <&syscfg 0x3000>; |
| access-controllers = <&rifsc 60>; |
| status = "disabled"; |
| |
| mtl_rx_setup_1: rx-queues-config { |
| snps,rx-queues-to-use = <2>; |
| queue0 {}; |
| queue1 {}; |
| }; |
| |
| mtl_tx_setup_1: tx-queues-config { |
| snps,tx-queues-to-use = <4>; |
| queue0 {}; |
| queue1 {}; |
| queue2 {}; |
| queue3 {}; |
| }; |
| |
| stmmac_axi_config_1: stmmac-axi-config { |
| snps,blen = <0 0 0 0 16 8 4>; |
| snps,rd_osr_lmt = <0x7>; |
| snps,wr_osr_lmt = <0x7>; |
| }; |
| }; |
| }; |
| |
| bsec: efuse@44000000 { |
| compatible = "st,stm32mp25-bsec"; |
| reg = <0x44000000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| part-number-otp@24 { |
| reg = <0x24 0x4>; |
| }; |
| |
| package-otp@1e8 { |
| reg = <0x1e8 0x1>; |
| bits = <0 3>; |
| }; |
| }; |
| |
| rcc: clock-controller@44200000 { |
| compatible = "st,stm32mp25-rcc"; |
| reg = <0x44200000 0x10000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| clocks = <&scmi_clk CK_SCMI_HSE>, |
| <&scmi_clk CK_SCMI_HSI>, |
| <&scmi_clk CK_SCMI_MSI>, |
| <&scmi_clk CK_SCMI_LSE>, |
| <&scmi_clk CK_SCMI_LSI>, |
| <&scmi_clk CK_SCMI_HSE_DIV2>, |
| <&scmi_clk CK_SCMI_ICN_HS_MCU>, |
| <&scmi_clk CK_SCMI_ICN_LS_MCU>, |
| <&scmi_clk CK_SCMI_ICN_SDMMC>, |
| <&scmi_clk CK_SCMI_ICN_DDR>, |
| <&scmi_clk CK_SCMI_ICN_DISPLAY>, |
| <&scmi_clk CK_SCMI_ICN_HSL>, |
| <&scmi_clk CK_SCMI_ICN_NIC>, |
| <&scmi_clk CK_SCMI_ICN_VID>, |
| <&scmi_clk CK_SCMI_FLEXGEN_07>, |
| <&scmi_clk CK_SCMI_FLEXGEN_08>, |
| <&scmi_clk CK_SCMI_FLEXGEN_09>, |
| <&scmi_clk CK_SCMI_FLEXGEN_10>, |
| <&scmi_clk CK_SCMI_FLEXGEN_11>, |
| <&scmi_clk CK_SCMI_FLEXGEN_12>, |
| <&scmi_clk CK_SCMI_FLEXGEN_13>, |
| <&scmi_clk CK_SCMI_FLEXGEN_14>, |
| <&scmi_clk CK_SCMI_FLEXGEN_15>, |
| <&scmi_clk CK_SCMI_FLEXGEN_16>, |
| <&scmi_clk CK_SCMI_FLEXGEN_17>, |
| <&scmi_clk CK_SCMI_FLEXGEN_18>, |
| <&scmi_clk CK_SCMI_FLEXGEN_19>, |
| <&scmi_clk CK_SCMI_FLEXGEN_20>, |
| <&scmi_clk CK_SCMI_FLEXGEN_21>, |
| <&scmi_clk CK_SCMI_FLEXGEN_22>, |
| <&scmi_clk CK_SCMI_FLEXGEN_23>, |
| <&scmi_clk CK_SCMI_FLEXGEN_24>, |
| <&scmi_clk CK_SCMI_FLEXGEN_25>, |
| <&scmi_clk CK_SCMI_FLEXGEN_26>, |
| <&scmi_clk CK_SCMI_FLEXGEN_27>, |
| <&scmi_clk CK_SCMI_FLEXGEN_28>, |
| <&scmi_clk CK_SCMI_FLEXGEN_29>, |
| <&scmi_clk CK_SCMI_FLEXGEN_30>, |
| <&scmi_clk CK_SCMI_FLEXGEN_31>, |
| <&scmi_clk CK_SCMI_FLEXGEN_32>, |
| <&scmi_clk CK_SCMI_FLEXGEN_33>, |
| <&scmi_clk CK_SCMI_FLEXGEN_34>, |
| <&scmi_clk CK_SCMI_FLEXGEN_35>, |
| <&scmi_clk CK_SCMI_FLEXGEN_36>, |
| <&scmi_clk CK_SCMI_FLEXGEN_37>, |
| <&scmi_clk CK_SCMI_FLEXGEN_38>, |
| <&scmi_clk CK_SCMI_FLEXGEN_39>, |
| <&scmi_clk CK_SCMI_FLEXGEN_40>, |
| <&scmi_clk CK_SCMI_FLEXGEN_41>, |
| <&scmi_clk CK_SCMI_FLEXGEN_42>, |
| <&scmi_clk CK_SCMI_FLEXGEN_43>, |
| <&scmi_clk CK_SCMI_FLEXGEN_44>, |
| <&scmi_clk CK_SCMI_FLEXGEN_45>, |
| <&scmi_clk CK_SCMI_FLEXGEN_46>, |
| <&scmi_clk CK_SCMI_FLEXGEN_47>, |
| <&scmi_clk CK_SCMI_FLEXGEN_48>, |
| <&scmi_clk CK_SCMI_FLEXGEN_49>, |
| <&scmi_clk CK_SCMI_FLEXGEN_50>, |
| <&scmi_clk CK_SCMI_FLEXGEN_51>, |
| <&scmi_clk CK_SCMI_FLEXGEN_52>, |
| <&scmi_clk CK_SCMI_FLEXGEN_53>, |
| <&scmi_clk CK_SCMI_FLEXGEN_54>, |
| <&scmi_clk CK_SCMI_FLEXGEN_55>, |
| <&scmi_clk CK_SCMI_FLEXGEN_56>, |
| <&scmi_clk CK_SCMI_FLEXGEN_57>, |
| <&scmi_clk CK_SCMI_FLEXGEN_58>, |
| <&scmi_clk CK_SCMI_FLEXGEN_59>, |
| <&scmi_clk CK_SCMI_FLEXGEN_60>, |
| <&scmi_clk CK_SCMI_FLEXGEN_61>, |
| <&scmi_clk CK_SCMI_FLEXGEN_62>, |
| <&scmi_clk CK_SCMI_FLEXGEN_63>, |
| <&scmi_clk CK_SCMI_ICN_APB1>, |
| <&scmi_clk CK_SCMI_ICN_APB2>, |
| <&scmi_clk CK_SCMI_ICN_APB3>, |
| <&scmi_clk CK_SCMI_ICN_APB4>, |
| <&scmi_clk CK_SCMI_ICN_APBDBG>, |
| <&scmi_clk CK_SCMI_TIMG1>, |
| <&scmi_clk CK_SCMI_TIMG2>, |
| <&scmi_clk CK_SCMI_PLL3>, |
| <&clk_dsi_txbyte>; |
| access-controllers = <&rifsc 156>; |
| }; |
| |
| exti1: interrupt-controller@44220000 { |
| compatible = "st,stm32mp1-exti", "syscon"; |
| reg = <0x44220000 0x400>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts-extended = |
| <&intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_0 */ |
| <&intc GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_10 */ |
| <&intc GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, /* EXTI_20 */ |
| <&intc GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_30 */ |
| <&intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <&intc GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_40 */ |
| <&intc GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_50 */ |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <&intc GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, /* EXTI_60 */ |
| <&intc GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <0>, |
| <&intc GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <0>, |
| <&intc GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_70 */ |
| <0>, |
| <&intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, /* EXTI_80 */ |
| <0>, |
| <0>, |
| <&intc GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| syscfg: syscon@44230000 { |
| compatible = "st,stm32mp23-syscfg", "syscon"; |
| reg = <0x44230000 0x10000>; |
| }; |
| |
| pinctrl: pinctrl@44240000 { |
| compatible = "st,stm32mp257-pinctrl"; |
| ranges = <0 0x44240000 0xa0400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&exti1>; |
| st,syscfg = <&exti1 0x60 0xff>; |
| pins-are-numbered; |
| |
| gpioa: gpio@44240000 { |
| reg = <0x0 0x400>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk CK_SCMI_GPIOA>; |
| st,bank-name = "GPIOA"; |
| status = "disabled"; |
| }; |
| |
| gpiob: gpio@44250000 { |
| reg = <0x10000 0x400>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk CK_SCMI_GPIOB>; |
| st,bank-name = "GPIOB"; |
| status = "disabled"; |
| }; |
| |
| gpioc: gpio@44260000 { |
| reg = <0x20000 0x400>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk CK_SCMI_GPIOC>; |
| st,bank-name = "GPIOC"; |
| status = "disabled"; |
| }; |
| |
| gpiod: gpio@44270000 { |
| reg = <0x30000 0x400>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk CK_SCMI_GPIOD>; |
| st,bank-name = "GPIOD"; |
| status = "disabled"; |
| }; |
| |
| gpioe: gpio@44280000 { |
| reg = <0x40000 0x400>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk CK_SCMI_GPIOE>; |
| st,bank-name = "GPIOE"; |
| status = "disabled"; |
| }; |
| |
| gpiof: gpio@44290000 { |
| reg = <0x50000 0x400>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk CK_SCMI_GPIOF>; |
| st,bank-name = "GPIOF"; |
| status = "disabled"; |
| }; |
| |
| gpiog: gpio@442a0000 { |
| reg = <0x60000 0x400>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk CK_SCMI_GPIOG>; |
| st,bank-name = "GPIOG"; |
| status = "disabled"; |
| }; |
| |
| gpioh: gpio@442b0000 { |
| reg = <0x70000 0x400>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk CK_SCMI_GPIOH>; |
| st,bank-name = "GPIOH"; |
| status = "disabled"; |
| }; |
| |
| gpioi: gpio@442c0000 { |
| reg = <0x80000 0x400>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk CK_SCMI_GPIOI>; |
| st,bank-name = "GPIOI"; |
| status = "disabled"; |
| }; |
| }; |
| |
| rtc: rtc@46000000 { |
| compatible = "st,stm32mp25-rtc"; |
| reg = <0x46000000 0x400>; |
| clocks = <&scmi_clk CK_SCMI_RTC>, |
| <&scmi_clk CK_SCMI_RTCCK>; |
| clock-names = "pclk", "rtc_ck"; |
| interrupts-extended = <&exti2 17 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| pinctrl_z: pinctrl@46200000 { |
| compatible = "st,stm32mp257-z-pinctrl"; |
| ranges = <0 0x46200000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&exti1>; |
| st,syscfg = <&exti1 0x60 0xff>; |
| pins-are-numbered; |
| |
| gpioz: gpio@46200000 { |
| reg = <0 0x400>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&scmi_clk CK_SCMI_GPIOZ>; |
| st,bank-name = "GPIOZ"; |
| st,bank-ioport = <11>; |
| status = "disabled"; |
| }; |
| |
| }; |
| |
| exti2: interrupt-controller@46230000 { |
| compatible = "st,stm32mp1-exti", "syscon"; |
| reg = <0x46230000 0x400>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts-extended = |
| <&intc GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_0 */ |
| <&intc GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_10 */ |
| <&intc GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <0>, |
| <0>, /* EXTI_20 */ |
| <&intc GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <0>, |
| <&intc GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <&intc GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_30 */ |
| <&intc GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <&intc GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <0>, |
| <&intc GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <0>, |
| <&intc GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_40 */ |
| <0>, |
| <0>, |
| <&intc GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <0>, |
| <&intc GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <&intc GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_50 */ |
| <&intc GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>, /* EXTI_60 */ |
| <&intc GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <&intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, |
| <0>, |
| <0>, |
| <&intc GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; /* EXTI_70 */ |
| }; |
| |
| intc: interrupt-controller@4ac10000 { |
| compatible = "arm,gic-400"; |
| reg = <0x4ac10000 0x1000>, |
| <0x4ac20000 0x20000>, |
| <0x4ac40000 0x20000>, |
| <0x4ac60000 0x20000>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| }; |
| }; |
| }; |
