| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. |
| * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> |
| #include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include "kodiak.dtsi" |
| #include "pm8350c.dtsi" |
| #include "pmk8350.dtsi" |
| |
| /delete-node/ &ipa_fw_mem; |
| /delete-node/ &rmtfs_mem; |
| /delete-node/ &xbl_mem; |
| /delete-node/ &adsp_mem; |
| /delete-node/ &cdsp_mem; |
| /delete-node/ &wpss_mem; |
| |
| / { |
| model = "Particle Tachyon"; |
| compatible = "particle,tachyon", "qcom,qcm6490"; |
| chassis-type = "embedded"; |
| |
| aliases { |
| serial0 = &uart5; |
| serial1 = &uart12; |
| serial2 = &uart7; |
| serial3 = &uart8; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| pinctrl-0 = <&activity_led_state>; |
| pinctrl-names = "default"; |
| |
| led-activity { |
| function = LED_FUNCTION_ACTIVITY; |
| color = <LED_COLOR_ID_RED>; |
| gpios = <&tlmm 14 GPIO_ACTIVE_HIGH>; |
| default-state = "on"; |
| panic-indicator; |
| }; |
| }; |
| |
| pmic-glink { |
| compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>; |
| |
| connector@0 { |
| compatible = "usb-c-connector"; |
| reg = <0>; |
| power-role = "dual"; |
| data-role = "dual"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| pmic_glink_hs_in: endpoint { |
| remote-endpoint = <&usb_1_dwc3_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| pmic_glink_ss_in: endpoint { |
| remote-endpoint = <&usb_dp_qmpphy_out>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| |
| pmic_glink_sbu_in: endpoint { |
| remote-endpoint = <&usbdp_sbu_mux>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| vreg_power_5v: regulator-power-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "power_5v"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&tlmm 13 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| vph_pwr: regulator-vph-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-min-microvolt = <3700000>; |
| regulator-max-microvolt = <3700000>; |
| }; |
| |
| reserved-memory { |
| xbl_mem: xbl@80700000 { |
| reg = <0x0 0x80700000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| tz_stat_mem: tz-stat@c0000000 { |
| reg = <0x0 0xc0000000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| tags_mem: tags@c0100000 { |
| reg = <0x0 0xc0100000 0x0 0x1200000>; |
| no-map; |
| }; |
| |
| qtee_mem: qtee@c1300000 { |
| reg = <0x0 0xc1300000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| trusted_apps_mem: trusted-apps@c1800000 { |
| reg = <0x0 0xc1800000 0x0 0x1c00000>; |
| no-map; |
| }; |
| |
| debug_vm_mem: debug-vm@d0600000 { |
| reg = <0x0 0xd0600000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| adsp_mem: adsp@86100000 { |
| reg = <0x0 0x86700000 0x0 0x2800000>; |
| no-map; |
| }; |
| |
| cdsp_mem: cdsp@88900000 { |
| reg = <0x0 0x88f00000 0x0 0x1e00000>; |
| no-map; |
| }; |
| |
| wpss_mem: wpss@9ae00000 { |
| reg = <0x0 0x9ae00000 0x0 0x1900000>; |
| no-map; |
| }; |
| |
| mpss_mem: mpss@8b800000 { |
| reg = <0x0 0x8b800000 0x0 0xf600000>; |
| no-map; |
| }; |
| |
| ipa_fw_mem: ipa-fw@8b300000 { |
| reg = <0x0 0x8b700000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| ipa_gsi_mem: ipa-gsi@8b310000 { |
| reg = <0x0 0x8b710000 0x0 0xa000>; |
| no-map; |
| }; |
| |
| rmtfs_mem: memory@f8500000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0x0 0xf8500000 0x0 0x600000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>; |
| }; |
| }; |
| |
| |
| usbdp-sbu-mux { |
| compatible = "pericom,pi3usb102", "gpio-sbu-mux"; |
| |
| enable-gpios = <&tlmm 108 GPIO_ACTIVE_HIGH>; |
| select-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-0 = <&usbdp_sbu_default>; |
| pinctrl-names = "default"; |
| |
| mode-switch; |
| orientation-switch; |
| |
| port { |
| usbdp_sbu_mux: endpoint { |
| remote-endpoint = <&pmic_glink_sbu_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &apps_rsc { |
| regulators-0 { |
| compatible = "qcom,pm7325-rpmh-regulators"; |
| qcom,pmic-id = "b"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| vdd-s7-supply = <&vph_pwr>; |
| vdd-s8-supply = <&vph_pwr>; |
| vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; |
| vdd-l2-l7-supply = <&vreg_bob_3p296>; |
| vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; |
| vdd-l8-supply = <&vreg_s7b_0p972>; |
| vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; |
| vdd-l13-supply = <&vreg_s7b_0p972>; |
| vdd-l14-l16-supply = <&vreg_s8b_1p272>; |
| |
| vreg_s1b_1p872: smps1 { |
| regulator-name = "vreg_s1b_1p872"; |
| regulator-min-microvolt = <1840000>; |
| regulator-max-microvolt = <2040000>; |
| }; |
| |
| vreg_s7b_0p972: smps7 { |
| regulator-name = "vreg_s7b_0p972"; |
| regulator-min-microvolt = <535000>; |
| regulator-max-microvolt = <1120000>; |
| }; |
| |
| vreg_s8b_1p272: smps8 { |
| regulator-name = "vreg_s8b_1p272"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; |
| }; |
| |
| vreg_l1b_0p912: ldo1 { |
| regulator-name = "vreg_l1b_0p912"; |
| regulator-min-microvolt = <825000>; |
| regulator-max-microvolt = <925000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2b_3p072: ldo2 { |
| regulator-name = "vreg_l2b_3p072"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3b_0p504: ldo3 { |
| regulator-name = "vreg_l3b_0p504"; |
| regulator-min-microvolt = <312000>; |
| regulator-max-microvolt = <910000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l6b_1p2: ldo6 { |
| regulator-name = "vreg_l6b_1p2"; |
| regulator-min-microvolt = <1140000>; |
| regulator-max-microvolt = <1260000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7b_2p952: ldo7 { |
| regulator-name = "vreg_l7b_2p952"; |
| regulator-min-microvolt = <2952000>; |
| regulator-max-microvolt = <2952000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8b_0p904: ldo8 { |
| regulator-name = "vreg_l8b_0p904"; |
| regulator-min-microvolt = <870000>; |
| regulator-max-microvolt = <970000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9b_1p2: ldo9 { |
| regulator-name = "vreg_l9b_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l11b_1p504: ldo11 { |
| regulator-name = "vreg_l11b_1p504"; |
| regulator-min-microvolt = <1504000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l12b_0p751: ldo12 { |
| regulator-name = "vreg_l12b_0p751"; |
| regulator-min-microvolt = <751000>; |
| regulator-max-microvolt = <824000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l13b_0p53: ldo13 { |
| regulator-name = "vreg_l13b_0p53"; |
| regulator-min-microvolt = <530000>; |
| regulator-max-microvolt = <824000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l14b_1p08: ldo14 { |
| regulator-name = "vreg_l14b_1p08"; |
| regulator-min-microvolt = <1080000>; |
| regulator-max-microvolt = <1304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l15b_0p765: ldo15 { |
| regulator-name = "vreg_l15b_0p765"; |
| regulator-min-microvolt = <765000>; |
| regulator-max-microvolt = <1020000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l16b_1p1: ldo16 { |
| regulator-name = "vreg_l16b_1p1"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l17b_1p7: ldo17 { |
| regulator-name = "vreg_l17b_1p7"; |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <1900000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l18b_1p8: ldo18 { |
| regulator-name = "vreg_l18b_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l19b_1p8: ldo19 { |
| regulator-name = "vreg_l19b_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-1 { |
| compatible = "qcom,pm8350c-rpmh-regulators"; |
| qcom,pmic-id = "c"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| vdd-s7-supply = <&vph_pwr>; |
| vdd-s8-supply = <&vph_pwr>; |
| vdd-s9-supply = <&vph_pwr>; |
| vdd-s10-supply = <&vph_pwr>; |
| vdd-l1-l12-supply = <&vreg_s1b_1p872>; |
| vdd-l2-l8-supply = <&vreg_s1b_1p872>; |
| vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>; |
| vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; |
| vdd-l10-supply = <&vreg_s7b_0p972>; |
| vdd-bob-supply = <&vph_pwr>; |
| |
| vreg_s1c_2p19: smps1 { |
| regulator-name = "vreg_s1c_2p19"; |
| regulator-min-microvolt = <2190000>; |
| regulator-max-microvolt = <2210000>; |
| }; |
| |
| vreg_s9c_1p084: smps9 { |
| regulator-name = "vreg_s9c_1p084"; |
| regulator-min-microvolt = <1084000>; |
| regulator-max-microvolt = <1170000>; |
| }; |
| |
| vreg_l1c_1p8: ldo1 { |
| regulator-name = "vreg_l1c_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2c_1p62: ldo2 { |
| regulator-name = "vreg_l2c_1p62"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3c_2p8: ldo3 { |
| regulator-name = "vreg_l3c_2p8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <3540000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4c_1p62: ldo4 { |
| regulator-name = "vreg_l4c_1p62"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l5c_1p62: ldo5 { |
| regulator-name = "vreg_l5c_1p62"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l6c_2p96: ldo6 { |
| regulator-name = "vreg_l6c_2p96"; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7c_3p0: ldo7 { |
| regulator-name = "vreg_l7c_3p0"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8c_1p62: ldo8 { |
| regulator-name = "vreg_l8c_1p62"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9c_2p96: ldo9 { |
| regulator-name = "vreg_l9c_2p96"; |
| regulator-min-microvolt = <2960000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l10c_0p88: ldo10 { |
| regulator-name = "vreg_l10c_0p88"; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <1050000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l11c_2p8: ldo11 { |
| regulator-name = "vreg_l11c_2p8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l12c_1p65: ldo12 { |
| regulator-name = "vreg_l12c_1p65"; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l13c_2p7: ldo13 { |
| regulator-name = "vreg_l13c_2p7"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_bob_3p296: bob { |
| regulator-name = "vreg_bob_3p296"; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3960000>; |
| }; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| |
| status = "okay"; |
| }; |
| |
| &ipa { |
| firmware-name = "qcom/qcm6490/particle/tachyon/ipa_fws.mbn"; |
| qcom,gsi-loader = "self"; |
| memory-region = <&ipa_fw_mem>; |
| |
| status = "okay"; |
| }; |
| |
| &gcc { |
| protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, |
| <GCC_MSS_CFG_AHB_CLK>, |
| <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, |
| <GCC_MSS_OFFLINE_AXI_CLK>, |
| <GCC_MSS_Q6SS_BOOT_CLK_SRC>, |
| <GCC_MSS_Q6_MEMNOC_AXI_CLK>, |
| <GCC_MSS_SNOC_AXI_CLK>, |
| <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, |
| <GCC_QSPI_CORE_CLK>, |
| <GCC_QSPI_CORE_CLK_SRC>, |
| <GCC_SEC_CTRL_CLK_SRC>, |
| <GCC_WPSS_AHB_BDG_MST_CLK>, |
| <GCC_WPSS_AHB_CLK>, |
| <GCC_WPSS_RSCP_CLK>; |
| }; |
| |
| &gpu { |
| status = "okay"; |
| }; |
| |
| &gpu_zap_shader { |
| firmware-name = "qcom/qcm6490/particle/tachyon/a660_zap.mbn"; |
| }; |
| |
| &mdss { |
| status = "okay"; |
| }; |
| |
| &mdss_dp { |
| status = "okay"; |
| }; |
| |
| &mdss_dp_out { |
| data-lanes = <0 1>; |
| }; |
| |
| &pcie0 { |
| perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>; |
| wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-0 = <&pcie0_reset_n>, <&pcie0_wake_n>, <&pcie0_clkreq_n>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |
| |
| &pcie0_phy { |
| vdda-phy-supply = <&vreg_l10c_0p88>; |
| vdda-pll-supply = <&vreg_l6b_1p2>; |
| |
| status = "okay"; |
| }; |
| |
| &pcie1 { |
| perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; |
| |
| pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>; |
| pinctrl-names = "default"; |
| |
| vddpe-3v3-supply = <&vreg_power_5v>; |
| |
| status = "okay"; |
| }; |
| |
| &pcie1_phy { |
| vdda-phy-supply = <&vreg_l10c_0p88>; |
| vdda-pll-supply = <&vreg_l6b_1p2>; |
| |
| status = "okay"; |
| }; |
| |
| &pmk8350_adc_tm { |
| status = "okay"; |
| |
| xo-therm@0 { |
| reg = <0>; |
| io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| }; |
| |
| &pmk8350_rtc { |
| status = "okay"; |
| }; |
| |
| &pmk8350_vadc { |
| status = "okay"; |
| |
| channel@44 { |
| reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pmk8350_xo_therm"; |
| }; |
| }; |
| |
| &pon_pwrkey { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_0 { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_1 { |
| status = "okay"; |
| }; |
| |
| &remoteproc_adsp { |
| firmware-name = "qcom/qcm6490/particle/tachyon/adsp.mbn"; |
| status = "okay"; |
| }; |
| |
| &remoteproc_cdsp { |
| firmware-name = "qcom/qcm6490/particle/tachyon/cdsp.mbn"; |
| status = "okay"; |
| }; |
| |
| &remoteproc_mpss { |
| firmware-name = "qcom/qcm6490/particle/tachyon/modem.mbn"; |
| status = "okay"; |
| }; |
| |
| &sdc2_clk { |
| bias-disable; |
| drive-strength = <16>; |
| }; |
| |
| &sdc2_cmd { |
| bias-pull-up; |
| drive-strength = <10>; |
| }; |
| |
| &sdc2_data { |
| bias-pull-up; |
| drive-strength = <10>; |
| }; |
| |
| &sdhc_2 { |
| vmmc-supply = <&vreg_l9c_2p96>; |
| vqmmc-supply = <&vreg_l6c_2p96>; |
| |
| cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; |
| |
| status = "okay"; |
| }; |
| |
| &tlmm { |
| activity_led_state: activity-led-state { |
| pins = "gpio14"; |
| function = "gpio"; |
| bias-disable; |
| }; |
| |
| bt_en_state: bt-default-state { |
| pins = "gpio84"; |
| function = "gpio"; |
| drive-strength = <16>; |
| output-low; |
| bias-pull-up; |
| }; |
| |
| pcie0_reset_n: pcie0-reset-n-state { |
| pins = "gpio87"; |
| function = "gpio"; |
| drive-strength = <16>; |
| output-low; |
| bias-disable; |
| }; |
| |
| pcie0_wake_n: pcie0-wake-n-state { |
| pins = "gpio89"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| pcie1_reset_n: pcie1-reset-n-state { |
| pins = "gpio2"; |
| function = "gpio"; |
| drive-strength = <16>; |
| output-low; |
| bias-disable; |
| }; |
| |
| pcie1_wake_n: pcie1-wake-n-state { |
| pins = "gpio3"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { |
| pins = "gpio28"; |
| function = "gpio"; |
| /* |
| * Configure a bias-bus-hold on CTS to lower power |
| * usage when Bluetooth is turned off. Bus hold will |
| * maintain a low power state regardless of whether |
| * the Bluetooth module drives the pin in either |
| * direction or leaves the pin fully unpowered. |
| */ |
| bias-bus-hold; |
| }; |
| |
| qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { |
| pins = "gpio29"; |
| function = "gpio"; |
| /* |
| * Configure pull-down on RTS. As RTS is active low |
| * signal, pull it low to indicate the BT SoC that it |
| * can wakeup the system anytime from suspend state by |
| * pulling RX low (by sending wakeup bytes). |
| */ |
| bias-pull-down; |
| }; |
| |
| qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { |
| pins = "gpio30"; |
| function = "gpio"; |
| /* |
| * Configure pull-up on TX when it isn't actively driven |
| * to prevent BT SoC from receiving garbage during sleep. |
| */ |
| bias-pull-up; |
| }; |
| |
| qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { |
| pins = "gpio31"; |
| function = "gpio"; |
| /* |
| * Configure a pull-up on RX. This is needed to avoid |
| * garbage data when the TX pin of the Bluetooth module |
| * is floating which may cause spurious wakeups. |
| */ |
| bias-pull-up; |
| }; |
| |
| usbdp_sbu_default: usbdp-sbu-state { |
| oe-n-pins { |
| pins = "gpio108"; |
| function = "gpio"; |
| bias-disable; |
| drive-strength = <16>; |
| output-high; |
| }; |
| |
| sel-pins { |
| pins = "gpio42"; |
| function = "gpio"; |
| bias-disable; |
| drive-strength = <16>; |
| }; |
| }; |
| |
| wlan_en_state: wlan-default-state { |
| pins = "gpio85"; |
| function = "gpio"; |
| drive-strength = <16>; |
| output-low; |
| bias-pull-up; |
| }; |
| }; |
| |
| &uart5 { |
| status = "okay"; |
| }; |
| |
| &uart7 { |
| /delete-property/ interrupts; |
| interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, |
| <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; |
| |
| pinctrl-1 = <&qup_uart7_sleep_cts>, |
| <&qup_uart7_sleep_rts>, |
| <&qup_uart7_sleep_tx>, |
| <&qup_uart7_sleep_rx>; |
| pinctrl-names = "default", "sleep"; |
| |
| status = "okay"; |
| }; |
| |
| &uart8 { |
| status = "okay"; |
| }; |
| |
| &uart12 { |
| status = "okay"; |
| }; |
| |
| &ufs_mem_hc { |
| reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; |
| vcc-supply = <&vreg_l7b_2p952>; |
| vcc-max-microamp = <800000>; |
| vccq-supply = <&vreg_l9b_1p2>; |
| vccq-max-microamp = <900000>; |
| vccq2-supply = <&vreg_l9b_1p2>; |
| vccq2-max-microamp = <900000>; |
| |
| status = "okay"; |
| }; |
| |
| &ufs_mem_phy { |
| vdda-phy-supply = <&vreg_l10c_0p88>; |
| vdda-pll-supply = <&vreg_l6b_1p2>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_1 { |
| dr_mode = "otg"; |
| usb-role-switch; |
| |
| status = "okay"; |
| }; |
| |
| &usb_1_dwc3_hs { |
| remote-endpoint = <&pmic_glink_hs_in>; |
| }; |
| |
| &usb_1_hsphy { |
| vdda-pll-supply = <&vreg_l10c_0p88>; |
| vdda33-supply = <&vreg_l2b_3p072>; |
| vdda18-supply = <&vreg_l1c_1p8>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_1_qmpphy { |
| vdda-phy-supply = <&vreg_l6b_1p2>; |
| vdda-pll-supply = <&vreg_l1b_0p912>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_2 { |
| dr_mode = "host"; |
| |
| status = "okay"; |
| }; |
| |
| &usb_2_hsphy { |
| vdda-pll-supply = <&vreg_l10c_0p88>; |
| vdda18-supply = <&vreg_l1c_1p8>; |
| vdda33-supply = <&vreg_l2b_3p072>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_dp_qmpphy_out { |
| remote-endpoint = <&pmic_glink_ss_in>; |
| }; |
