| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. |
| */ |
| |
| #include "pmcx0102.dtsi" /* SPMI0: SID-2/3 SPMI1: SID-2/3 */ |
| #include "pmh0101.dtsi" /* SPMI0: SID-1 */ |
| #include "pmh0110-glymur.dtsi" /* SPMI0: SID-5/7 SPMI1: SID-5 */ |
| #include "pmh0104-glymur.dtsi" /* SPMI0: SID-8/9 SPMI1: SID-11 */ |
| #include "pmk8850.dtsi" /* SPMI0: SID-0 */ |
| #include "smb2370.dtsi" /* SPMI2: SID-9/10/11 */ |
| |
| / { |
| model = "Qualcomm Technologies, Inc. Glymur CRD"; |
| compatible = "qcom,glymur-crd", "qcom,glymur"; |
| |
| aliases { |
| serial0 = &uart21; |
| serial1 = &uart14; |
| i2c0 = &i2c0; |
| i2c1 = &i2c4; |
| i2c2 = &i2c5; |
| spi0 = &spi18; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| clocks { |
| xo_board: xo-board { |
| compatible = "fixed-clock"; |
| clock-frequency = <38400000>; |
| #clock-cells = <0>; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <32000>; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| pinctrl-0 = <&key_vol_up_default>; |
| pinctrl-names = "default"; |
| |
| key-volume-up { |
| label = "Volume Up"; |
| linux,code = <KEY_VOLUMEUP>; |
| gpios = <&pmh0101_gpios 6 GPIO_ACTIVE_LOW>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| wakeup-source; |
| }; |
| }; |
| |
| vreg_nvme: regulator-nvme { |
| compatible = "regulator-fixed"; |
| |
| regulator-name = "VREG_NVME_3P3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| gpio = <&pmh0101_gpios 14 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-0 = <&nvme_reg_en>; |
| pinctrl-names = "default"; |
| |
| regulator-boot-on; |
| }; |
| |
| vreg_nvmesec: regulator-nvmesec { |
| compatible = "regulator-fixed"; |
| |
| regulator-name = "VREG_NVME_SEC_3P3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| gpio = <&pmh0110_f_e1_gpios 14 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-0 = <&nvme_sec_reg_en>; |
| pinctrl-names = "default"; |
| |
| regulator-boot-on; |
| }; |
| |
| vreg_wcn_0p95: regulator-wcn-0p95 { |
| compatible = "regulator-fixed"; |
| |
| regulator-name = "VREG_WCN_0P95"; |
| regulator-min-microvolt = <950000>; |
| regulator-max-microvolt = <950000>; |
| |
| vin-supply = <&vreg_wcn_3p3>; |
| }; |
| |
| vreg_wcn_3p3: regulator-wcn-3p3 { |
| compatible = "regulator-fixed"; |
| |
| regulator-name = "VREG_WCN_3P3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| gpio = <&tlmm 94 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-0 = <&wcn_sw_en>; |
| pinctrl-names = "default"; |
| |
| regulator-boot-on; |
| }; |
| |
| vreg_wwan: regulator-wwan { |
| compatible = "regulator-fixed"; |
| |
| regulator-name = "VREG_WWAN_3P3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| gpio = <&tlmm 246 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-0 = <&wwan_reg_en>; |
| pinctrl-names = "default"; |
| }; |
| |
| wcn7850-pmu { |
| compatible = "qcom,wcn7850-pmu"; |
| |
| vdd-supply = <&vreg_wcn_0p95>; |
| vddio-supply = <&vreg_l15b_e0_1p8>; |
| vddaon-supply = <&vreg_l15b_e0_1p8>; |
| vdddig-supply = <&vreg_l15b_e0_1p8>; |
| vddrfa1p2-supply = <&vreg_l15b_e0_1p8>; |
| vddrfa1p8-supply = <&vreg_l15b_e0_1p8>; |
| |
| wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; |
| bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-0 = <&wcn_wlan_bt_en>; |
| pinctrl-names = "default"; |
| |
| regulators { |
| vreg_pmu_rfa_cmn: ldo0 { |
| regulator-name = "vreg_pmu_rfa_cmn"; |
| }; |
| |
| vreg_pmu_aon_0p59: ldo1 { |
| regulator-name = "vreg_pmu_aon_0p59"; |
| }; |
| |
| vreg_pmu_wlcx_0p8: ldo2 { |
| regulator-name = "vreg_pmu_wlcx_0p8"; |
| }; |
| |
| vreg_pmu_wlmx_0p85: ldo3 { |
| regulator-name = "vreg_pmu_wlmx_0p85"; |
| }; |
| |
| vreg_pmu_btcmx_0p85: ldo4 { |
| regulator-name = "vreg_pmu_btcmx_0p85"; |
| }; |
| |
| vreg_pmu_rfa_0p8: ldo5 { |
| regulator-name = "vreg_pmu_rfa_0p8"; |
| }; |
| |
| vreg_pmu_rfa_1p2: ldo6 { |
| regulator-name = "vreg_pmu_rfa_1p2"; |
| }; |
| |
| vreg_pmu_rfa_1p8: ldo7 { |
| regulator-name = "vreg_pmu_rfa_1p8"; |
| }; |
| |
| vreg_pmu_pcie_0p9: ldo8 { |
| regulator-name = "vreg_pmu_pcie_0p9"; |
| }; |
| |
| vreg_pmu_pcie_1p8: ldo9 { |
| regulator-name = "vreg_pmu_pcie_1p8"; |
| }; |
| }; |
| }; |
| }; |
| |
| &apps_rsc { |
| regulators-0 { |
| compatible = "qcom,pmh0101-rpmh-regulators"; |
| qcom,pmic-id = "B_E0"; |
| |
| vreg_bob1_e0: bob1 { |
| regulator-name = "vreg_bob1_e0"; |
| regulator-min-microvolt = <2200000>; |
| regulator-max-microvolt = <4224000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| }; |
| |
| vreg_bob2_e0: bob2 { |
| regulator-name = "vreg_bob2_e0"; |
| regulator-min-microvolt = <2540000>; |
| regulator-max-microvolt = <3600000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| }; |
| |
| vreg_l1b_e0_1p8: ldo1 { |
| regulator-name = "vreg_l1b_e0_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2b_e0_2p9: ldo2 { |
| regulator-name = "vreg_l2b_e0_2p9"; |
| regulator-min-microvolt = <2904000>; |
| regulator-max-microvolt = <2904000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7b_e0_2p79: ldo7 { |
| regulator-name = "vreg_l7b_e0_2p79"; |
| regulator-min-microvolt = <2790000>; |
| regulator-max-microvolt = <2792000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8b_e0_1p50: ldo8 { |
| regulator-name = "vreg_l8b_e0_1p50"; |
| regulator-min-microvolt = <1504000>; |
| regulator-max-microvolt = <1504000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9b_e0_2p7: ldo9 { |
| regulator-name = "vreg_l9b_e0_2p7"; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <2704000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l10b_e0_1p8: ldo10 { |
| regulator-name = "vreg_l10b_e0_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l11b_e0_1p2: ldo11 { |
| regulator-name = "vreg_l11b_e0_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l12b_e0_1p14: ldo12 { |
| regulator-name = "vreg_l12b_e0_1p14"; |
| regulator-min-microvolt = <1144000>; |
| regulator-max-microvolt = <1144000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l15b_e0_1p8: ldo15 { |
| regulator-name = "vreg_l15b_e0_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l17b_e0_2p4: ldo17 { |
| regulator-name = "vreg_l17b_e0_2p4"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <2700000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l18b_e0_1p2: ldo18 { |
| regulator-name = "vreg_l18b_e0_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-1 { |
| compatible = "qcom,pmcx0102-rpmh-regulators"; |
| qcom,pmic-id = "C_E1"; |
| |
| vreg_l1c_e1_0p82: ldo1 { |
| regulator-name = "vreg_l1c_e1_0p82"; |
| regulator-min-microvolt = <832000>; |
| regulator-max-microvolt = <832000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2c_e1_1p14: ldo2 { |
| regulator-name = "vreg_l2c_e1_1p14"; |
| regulator-min-microvolt = <1144000>; |
| regulator-max-microvolt = <1144000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3c_e1_0p89: ldo3 { |
| regulator-name = "vreg_l3c_e1_0p89"; |
| regulator-min-microvolt = <890000>; |
| regulator-max-microvolt = <980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4c_e1_0p72: ldo4 { |
| regulator-name = "vreg_l4c_e1_0p72"; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <720000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-2 { |
| compatible = "qcom,pmh0110-rpmh-regulators"; |
| qcom,pmic-id = "F_E0"; |
| |
| vreg_s7f_e0_1p32: smps7 { |
| regulator-name = "vreg_s7f_e0_1p32"; |
| regulator-min-microvolt = <1320000>; |
| regulator-max-microvolt = <1352000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s8f_e0_0p95: smps8 { |
| regulator-name = "vreg_s8f_e0_0p95"; |
| regulator-min-microvolt = <952000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s9f_e0_1p9: smps9 { |
| regulator-name = "vreg_s9f_e0_1p9"; |
| regulator-min-microvolt = <1900000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2f_e0_0p82: ldo2 { |
| regulator-name = "vreg_l2f_e0_0p82"; |
| regulator-min-microvolt = <832000>; |
| regulator-max-microvolt = <832000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3f_e0_0p72: ldo3 { |
| regulator-name = "vreg_l3f_e0_0p72"; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <720000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4f_e0_0p3: ldo4 { |
| regulator-name = "vreg_l4f_e0_0p3"; |
| regulator-min-microvolt = <1080000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-3 { |
| compatible = "qcom,pmh0110-rpmh-regulators"; |
| qcom,pmic-id = "F_E1"; |
| |
| vreg_s7f_e1_0p3: smps7 { |
| regulator-name = "vreg_s7f_e1_0p3"; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l1f_e1_0p82: ldo1 { |
| regulator-name = "vreg_l1f_e1_0p82"; |
| regulator-min-microvolt = <832000>; |
| regulator-max-microvolt = <832000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2f_e1_0p83: ldo2 { |
| regulator-name = "vreg_l2f_e1_0p83"; |
| regulator-min-microvolt = <832000>; |
| regulator-max-microvolt = <832000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4f_e1_1p08: ldo4 { |
| regulator-name = "vreg_l4f_e1_1p08"; |
| regulator-min-microvolt = <1080000>; |
| regulator-max-microvolt = <1320000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-4 { |
| compatible = "qcom,pmh0110-rpmh-regulators"; |
| qcom,pmic-id = "H_E0"; |
| |
| vreg_l1h_e0_0p89: ldo1 { |
| regulator-name = "vreg_l1h_e0_0p89"; |
| regulator-min-microvolt = <832000>; |
| regulator-max-microvolt = <832000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2h_e0_0p72: ldo2 { |
| regulator-name = "vreg_l2h_e0_0p72"; |
| regulator-min-microvolt = <832000>; |
| regulator-max-microvolt = <832000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3h_e0_0p32: ldo3 { |
| regulator-name = "vreg_l3h_e0_0p32"; |
| regulator-min-microvolt = <320000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4h_e0_1p2: ldo4 { |
| regulator-name = "vreg_l4h_e0_1p2"; |
| regulator-min-microvolt = <1080000>; |
| regulator-max-microvolt = <1320000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| }; |
| |
| &pcie3b { |
| vddpe-3v3-supply = <&vreg_nvmesec>; |
| |
| pinctrl-0 = <&pcie3b_default>; |
| pinctrl-names = "default"; |
| }; |
| |
| &pcie3b_phy { |
| vdda-phy-supply = <&vreg_l3c_e1_0p89>; |
| vdda-pll-supply = <&vreg_l2c_e1_1p14>; |
| }; |
| |
| &pcie3b_port0 { |
| reset-gpios = <&tlmm 155 GPIO_ACTIVE_LOW>; |
| wake-gpios = <&tlmm 157 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &pcie4 { |
| pinctrl-0 = <&pcie4_default>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |
| |
| &pcie4_phy { |
| vdda-phy-supply = <&vreg_l1c_e1_0p82>; |
| vdda-pll-supply = <&vreg_l4f_e1_1p08>; |
| |
| status = "okay"; |
| }; |
| |
| &pcie4_port0 { |
| reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; |
| wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; |
| |
| wifi@0 { |
| compatible = "pci17cb,1107"; |
| reg = <0x10000 0x0 0x0 0x0 0x0>; |
| |
| vddaon-supply = <&vreg_pmu_aon_0p59>; |
| vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; |
| vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; |
| vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; |
| vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; |
| vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; |
| vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; |
| vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; |
| vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; |
| }; |
| }; |
| |
| &pcie5 { |
| vddpe-3v3-supply = <&vreg_nvme>; |
| |
| pinctrl-0 = <&pcie5_default>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |
| |
| &pcie5_phy { |
| vdda-phy-supply = <&vreg_l2f_e0_0p82>; |
| vdda-pll-supply = <&vreg_l4h_e0_1p2>; |
| |
| status = "okay"; |
| }; |
| |
| &pcie5_port0 { |
| reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; |
| wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &pcie6 { |
| vddpe-3v3-supply = <&vreg_wwan>; |
| |
| pinctrl-0 = <&pcie6_default>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |
| |
| &pcie6_phy { |
| vdda-phy-supply = <&vreg_l1c_e1_0p82>; |
| vdda-pll-supply = <&vreg_l4f_e1_1p08>; |
| |
| status = "okay"; |
| }; |
| |
| &pcie6_port0 { |
| reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; |
| wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &pmh0101_gpios { |
| nvme_reg_en: nvme-reg-en-state { |
| pins = "gpio14"; |
| function = "normal"; |
| bias-disable; |
| }; |
| }; |
| |
| &pmh0110_f_e1_gpios { |
| nvme_sec_reg_en: nvme-reg-en-state { |
| pins = "gpio14"; |
| function = "normal"; |
| bias-disable; |
| }; |
| }; |
| |
| &pmh0101_gpios { |
| key_vol_up_default: key-vol-up-default-state { |
| pins = "gpio6"; |
| function = "normal"; |
| output-disable; |
| bias-pull-up; |
| }; |
| }; |
| |
| &pmk8850_rtc { |
| qcom,no-alarm; |
| }; |
| |
| &pon_resin { |
| linux,code = <KEY_VOLUMEDOWN>; |
| status = "okay"; |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */ |
| <10 2>, /* OOB UART */ |
| <44 4>; /* Security SPI (TPM) */ |
| |
| pcie4_default: pcie4-default-state { |
| clkreq-n-pins { |
| pins = "gpio147"; |
| function = "pcie4_clk_req_n"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| perst-n-pins { |
| pins = "gpio146"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| wake-n-pins { |
| pins = "gpio148"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| pcie5_default: pcie5-default-state { |
| clkreq-n-pins { |
| pins = "gpio153"; |
| function = "pcie5_clk_req_n"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| perst-n-pins { |
| pins = "gpio152"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| wake-n-pins { |
| pins = "gpio154"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| pcie6_default: pcie6-default-state { |
| clkreq-n-pins { |
| pins = "gpio150"; |
| function = "pcie6_clk_req_n"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| perst-n-pins { |
| pins = "gpio149"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| wake-n-pins { |
| pins = "gpio151"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| pcie3b_default: pcie3b-default-state { |
| clkreq-n-pins { |
| pins = "gpio156"; |
| function = "pcie3b_clk"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| perst-n-pins { |
| pins = "gpio155"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| wake-n-pins { |
| pins = "gpio157"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| wcn_wlan_bt_en: wcn-wlan-bt-en-state { |
| pins = "gpio116", "gpio117"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| wcn_sw_en: wcn-sw-en-state { |
| pins = "gpio94"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| wwan_reg_en: wwan-reg-en-state { |
| pins = "gpio246"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| &uart14 { |
| status = "okay"; |
| |
| bluetooth { |
| compatible = "qcom,wcn7850-bt"; |
| max-speed = <3200000>; |
| |
| vddaon-supply = <&vreg_pmu_aon_0p59>; |
| vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; |
| vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; |
| vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; |
| vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; |
| vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; |
| vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; |
| }; |
| }; |
