| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| |
| /dts-v1/; |
| |
| #include "imx8mp-skov-reva.dtsi" |
| |
| / { |
| model = "SKOV IMX8MP CPU revB - LT6"; |
| compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp"; |
| |
| lvds-decoder { |
| compatible = "ti,sn65lvds822", "lvds-decoder"; |
| power-supply = <®_3v3>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| in_lvds1: endpoint { |
| data-mapping = "vesa-24"; |
| remote-endpoint = <&ldb_lvds_ch1>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| lvds_decoder_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| panel { |
| compatible = "logictechno,lttd800480070-l6wh-rt"; |
| backlight = <&backlight>; |
| power-supply = <®_tft_vcom>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&lvds_decoder_out>; |
| }; |
| }; |
| }; |
| |
| touchscreen { |
| compatible = "resistive-adc-touch"; |
| io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>; |
| io-channel-names = "y", "z1", "z2", "x"; |
| touchscreen-min-pressure = <65000>; |
| touchscreen-inverted-y; |
| touchscreen-swapped-x-y; |
| touchscreen-x-plate-ohms = <300>; |
| }; |
| }; |
| |
| ®_tft_vcom { |
| regulator-min-microvolt = <3600000>; |
| regulator-max-microvolt = <3600000>; |
| voltage-table = <3600000 26>; |
| status = "okay"; |
| }; |
| |
| &pwm4 { |
| status = "okay"; |
| }; |
| |
| &backlight { |
| status = "okay"; |
| }; |
| |
| &ecspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| adc_ts: adc@0 { |
| compatible = "ti,tsc2046e-adc"; |
| reg = <0>; |
| pinctrl-0 = <&pinctrl_touch>; |
| pinctrl-names = "default"; |
| spi-max-frequency = <1000000>; |
| interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; |
| #io-channel-cells = <1>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| channel@1 { |
| reg = <1>; |
| settling-time-us = <700>; |
| oversampling-ratio = <5>; |
| }; |
| |
| channel@3 { |
| reg = <3>; |
| settling-time-us = <700>; |
| oversampling-ratio = <5>; |
| }; |
| |
| channel@4 { |
| reg = <4>; |
| settling-time-us = <700>; |
| oversampling-ratio = <5>; |
| }; |
| |
| channel@5 { |
| reg = <5>; |
| settling-time-us = <700>; |
| oversampling-ratio = <5>; |
| }; |
| }; |
| }; |
| |
| &lcdif2 { |
| status = "okay"; |
| }; |
| |
| &lvds_bridge { |
| assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, |
| <&clk IMX8MP_VIDEO_PLL1>; |
| assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; |
| /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */ |
| assigned-clock-rates = <0>, <462000000>; |
| status = "okay"; |
| |
| ports { |
| port@2 { |
| ldb_lvds_ch1: endpoint { |
| remote-endpoint = <&in_lvds1>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pwm1 { |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 |
| MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 |
| MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 |
| MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 |
| >; |
| }; |
| |
| pinctrl_touch: touchgrp { |
| fsl,pins = < |
| /* external pull up */ |
| MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40 |
| >; |
| }; |
| }; |