| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * linux/arch/arm/plat-omap/ocpi.c | |
| * | |
| * Minimal OCP bus support for omap16xx | |
| * | |
| * Copyright (C) 2003 - 2005 Nokia Corporation | |
| * Copyright (C) 2012 Texas Instruments, Inc. | |
| * Written by Tony Lindgren <tony@atomide.com> | |
| * | |
| * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/errno.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/err.h> | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/soc/ti/omap1-io.h> | |
| #include "hardware.h" | |
| #include "common.h" | |
| #define OCPI_BASE 0xfffec320 | |
| #define OCPI_FAULT (OCPI_BASE + 0x00) | |
| #define OCPI_CMD_FAULT (OCPI_BASE + 0x04) | |
| #define OCPI_SINT0 (OCPI_BASE + 0x08) | |
| #define OCPI_TABORT (OCPI_BASE + 0x0c) | |
| #define OCPI_SINT1 (OCPI_BASE + 0x10) | |
| #define OCPI_PROT (OCPI_BASE + 0x14) | |
| #define OCPI_SEC (OCPI_BASE + 0x18) | |
| /* USB OHCI OCPI access error registers */ | |
| #define HOSTUEADDR 0xfffba0e0 | |
| #define HOSTUESTATUS 0xfffba0e4 | |
| static struct clk *ocpi_ck; | |
| /* | |
| * Enables device access to OMAP buses via the OCPI bridge | |
| */ | |
| int ocpi_enable(void) | |
| { | |
| unsigned int val; | |
| if (!cpu_is_omap16xx()) | |
| return -ENODEV; | |
| /* Enable access for OHCI in OCPI */ | |
| val = omap_readl(OCPI_PROT); | |
| val &= ~0xff; | |
| /* val &= (1 << 0); Allow access only to EMIFS */ | |
| omap_writel(val, OCPI_PROT); | |
| val = omap_readl(OCPI_SEC); | |
| val &= ~0xff; | |
| omap_writel(val, OCPI_SEC); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(ocpi_enable); | |
| static int __init omap_ocpi_init(void) | |
| { | |
| if (!cpu_is_omap16xx()) | |
| return -ENODEV; | |
| ocpi_ck = clk_get(NULL, "l3_ocpi_ck"); | |
| if (IS_ERR(ocpi_ck)) | |
| return PTR_ERR(ocpi_ck); | |
| clk_prepare_enable(ocpi_ck); | |
| ocpi_enable(); | |
| pr_info("OMAP OCPI interconnect driver loaded\n"); | |
| return 0; | |
| } | |
| static void __exit omap_ocpi_exit(void) | |
| { | |
| /* REVISIT: Disable OCPI */ | |
| if (!cpu_is_omap16xx()) | |
| return; | |
| clk_disable_unprepare(ocpi_ck); | |
| clk_put(ocpi_ck); | |
| } | |
| MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); | |
| MODULE_DESCRIPTION("OMAP OCPI bus controller module"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(omap_ocpi_init); | |
| module_exit(omap_ocpi_exit); |