| // SPDX-License-Identifier: (GPL-2.0 OR MIT) | |
| /* | |
| * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> | |
| */ | |
| #include <dt-bindings/clock/berlin2q.h> | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| / { | |
| model = "Marvell Armada 1500 pro (BG2-Q) SoC"; | |
| compatible = "marvell,berlin2q", "marvell,berlin"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| aliases { | |
| serial0 = &uart0; | |
| serial1 = &uart1; | |
| }; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| enable-method = "marvell,berlin-smp"; | |
| cpu0: cpu@0 { | |
| compatible = "arm,cortex-a9"; | |
| device_type = "cpu"; | |
| next-level-cache = <&l2>; | |
| reg = <0>; | |
| clocks = <&chip_clk CLKID_CPU>; | |
| clock-latency = <100000>; | |
| /* Can be modified by the bootloader */ | |
| operating-points = < | |
| /* kHz uV */ | |
| 1200000 1200000 | |
| 1000000 1200000 | |
| 800000 1200000 | |
| 600000 1200000 | |
| >; | |
| }; | |
| cpu1: cpu@1 { | |
| compatible = "arm,cortex-a9"; | |
| device_type = "cpu"; | |
| next-level-cache = <&l2>; | |
| reg = <1>; | |
| clocks = <&chip_clk CLKID_CPU>; | |
| clock-latency = <100000>; | |
| /* Can be modified by the bootloader */ | |
| operating-points = < | |
| /* kHz uV */ | |
| 1200000 1200000 | |
| 1000000 1200000 | |
| 800000 1200000 | |
| 600000 1200000 | |
| >; | |
| }; | |
| cpu2: cpu@2 { | |
| compatible = "arm,cortex-a9"; | |
| device_type = "cpu"; | |
| next-level-cache = <&l2>; | |
| reg = <2>; | |
| clocks = <&chip_clk CLKID_CPU>; | |
| clock-latency = <100000>; | |
| /* Can be modified by the bootloader */ | |
| operating-points = < | |
| /* kHz uV */ | |
| 1200000 1200000 | |
| 1000000 1200000 | |
| 800000 1200000 | |
| 600000 1200000 | |
| >; | |
| }; | |
| cpu3: cpu@3 { | |
| compatible = "arm,cortex-a9"; | |
| device_type = "cpu"; | |
| next-level-cache = <&l2>; | |
| reg = <3>; | |
| clocks = <&chip_clk CLKID_CPU>; | |
| clock-latency = <100000>; | |
| /* Can be modified by the bootloader */ | |
| operating-points = < | |
| /* kHz uV */ | |
| 1200000 1200000 | |
| 1000000 1200000 | |
| 800000 1200000 | |
| 600000 1200000 | |
| >; | |
| }; | |
| }; | |
| pmu { | |
| compatible = "arm,cortex-a9-pmu"; | |
| interrupt-parent = <&gic>; | |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; | |
| interrupt-affinity = <&cpu0>, | |
| <&cpu1>, | |
| <&cpu2>, | |
| <&cpu3>; | |
| }; | |
| refclk: oscillator { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <25000000>; | |
| }; | |
| soc@f7000000 { | |
| compatible = "simple-bus"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0 0xf7000000 0x1000000>; | |
| interrupt-parent = <&gic>; | |
| sdhci0: mmc@ab0000 { | |
| compatible = "mrvl,pxav3-mmc"; | |
| reg = <0xab0000 0x200>; | |
| clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; | |
| clock-names = "io", "core"; | |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; | |
| status = "disabled"; | |
| }; | |
| sdhci1: mmc@ab0800 { | |
| compatible = "mrvl,pxav3-mmc"; | |
| reg = <0xab0800 0x200>; | |
| clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; | |
| clock-names = "io", "core"; | |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; | |
| status = "disabled"; | |
| }; | |
| sdhci2: mmc@ab1000 { | |
| compatible = "mrvl,pxav3-mmc"; | |
| reg = <0xab1000 0x200>; | |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>; | |
| clock-names = "io", "core"; | |
| status = "disabled"; | |
| }; | |
| l2: cache-controller@ac0000 { | |
| compatible = "arm,pl310-cache"; | |
| reg = <0xac0000 0x1000>; | |
| cache-unified; | |
| cache-level = <2>; | |
| arm,data-latency = <2 2 2>; | |
| arm,tag-latency = <2 2 2>; | |
| }; | |
| scu: snoop-control-unit@ad0000 { | |
| compatible = "arm,cortex-a9-scu"; | |
| reg = <0xad0000 0x58>; | |
| }; | |
| local-timer@ad0600 { | |
| compatible = "arm,cortex-a9-twd-timer"; | |
| reg = <0xad0600 0x20>; | |
| clocks = <&chip_clk CLKID_TWD>; | |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; | |
| }; | |
| gic: interrupt-controller@ad1000 { | |
| compatible = "arm,cortex-a9-gic"; | |
| reg = <0xad1000 0x1000>, <0xad0100 0x100>; | |
| interrupt-controller; | |
| #interrupt-cells = <3>; | |
| }; | |
| usb_phy2: phy@a2f400 { | |
| compatible = "marvell,berlin2cd-usb-phy"; | |
| reg = <0xa2f400 0x128>; | |
| #phy-cells = <0>; | |
| resets = <&chip_rst 0x104 14>; | |
| status = "disabled"; | |
| }; | |
| usb2: usb@a30000 { | |
| compatible = "chipidea,usb2"; | |
| reg = <0xa30000 0x10000>; | |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&chip_clk CLKID_USB2>; | |
| phys = <&usb_phy2>; | |
| phy-names = "usb-phy"; | |
| status = "disabled"; | |
| }; | |
| usb_phy0: phy@b74000 { | |
| compatible = "marvell,berlin2cd-usb-phy"; | |
| reg = <0xb74000 0x128>; | |
| #phy-cells = <0>; | |
| resets = <&chip_rst 0x104 12>; | |
| status = "disabled"; | |
| }; | |
| usb_phy1: phy@b78000 { | |
| compatible = "marvell,berlin2cd-usb-phy"; | |
| reg = <0xb78000 0x128>; | |
| #phy-cells = <0>; | |
| resets = <&chip_rst 0x104 13>; | |
| status = "disabled"; | |
| }; | |
| eth0: ethernet@b90000 { | |
| compatible = "marvell,pxa168-eth"; | |
| reg = <0xb90000 0x10000>; | |
| clocks = <&chip_clk CLKID_GETH0>; | |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; | |
| /* set by bootloader */ | |
| local-mac-address = [00 00 00 00 00 00]; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| phy-connection-type = "mii"; | |
| phy-handle = <ðphy0>; | |
| status = "disabled"; | |
| ethphy0: ethernet-phy@0 { | |
| reg = <0>; | |
| }; | |
| }; | |
| cpu-ctrl@dd0000 { | |
| compatible = "marvell,berlin-cpu-ctrl"; | |
| reg = <0xdd0000 0x10000>; | |
| }; | |
| apb@e80000 { | |
| compatible = "simple-bus"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0 0xe80000 0x10000>; | |
| interrupt-parent = <&aic>; | |
| gpio0: gpio@400 { | |
| compatible = "snps,dw-apb-gpio"; | |
| reg = <0x0400 0x400>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| porta: gpio-port@0 { | |
| compatible = "snps,dw-apb-gpio-port"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| ngpios = <32>; | |
| reg = <0>; | |
| interrupt-controller; | |
| #interrupt-cells = <2>; | |
| interrupts = <0>; | |
| }; | |
| }; | |
| gpio1: gpio@800 { | |
| compatible = "snps,dw-apb-gpio"; | |
| reg = <0x0800 0x400>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| portb: gpio-port@1 { | |
| compatible = "snps,dw-apb-gpio-port"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| ngpios = <32>; | |
| reg = <0>; | |
| interrupt-controller; | |
| #interrupt-cells = <2>; | |
| interrupts = <1>; | |
| }; | |
| }; | |
| gpio2: gpio@c00 { | |
| compatible = "snps,dw-apb-gpio"; | |
| reg = <0x0c00 0x400>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| portc: gpio-port@2 { | |
| compatible = "snps,dw-apb-gpio-port"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| ngpios = <32>; | |
| reg = <0>; | |
| interrupt-controller; | |
| #interrupt-cells = <2>; | |
| interrupts = <2>; | |
| }; | |
| }; | |
| gpio3: gpio@1000 { | |
| compatible = "snps,dw-apb-gpio"; | |
| reg = <0x1000 0x400>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| portd: gpio-port@3 { | |
| compatible = "snps,dw-apb-gpio-port"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| ngpios = <32>; | |
| reg = <0>; | |
| interrupt-controller; | |
| #interrupt-cells = <2>; | |
| interrupts = <3>; | |
| }; | |
| }; | |
| i2c0: i2c@1400 { | |
| compatible = "snps,designware-i2c"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x1400 0x100>; | |
| interrupts = <4>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| pinctrl-0 = <&twsi0_pmux>; | |
| pinctrl-names = "default"; | |
| status = "disabled"; | |
| }; | |
| i2c1: i2c@1800 { | |
| compatible = "snps,designware-i2c"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x1800 0x100>; | |
| interrupts = <5>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| pinctrl-0 = <&twsi1_pmux>; | |
| pinctrl-names = "default"; | |
| status = "disabled"; | |
| }; | |
| timer0: timer@2c00 { | |
| compatible = "snps,dw-apb-timer"; | |
| reg = <0x2c00 0x14>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| clock-names = "timer"; | |
| interrupts = <8>; | |
| }; | |
| timer1: timer@2c14 { | |
| compatible = "snps,dw-apb-timer"; | |
| reg = <0x2c14 0x14>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| clock-names = "timer"; | |
| }; | |
| timer2: timer@2c28 { | |
| compatible = "snps,dw-apb-timer"; | |
| reg = <0x2c28 0x14>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| clock-names = "timer"; | |
| status = "disabled"; | |
| }; | |
| timer3: timer@2c3c { | |
| compatible = "snps,dw-apb-timer"; | |
| reg = <0x2c3c 0x14>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| clock-names = "timer"; | |
| status = "disabled"; | |
| }; | |
| timer4: timer@2c50 { | |
| compatible = "snps,dw-apb-timer"; | |
| reg = <0x2c50 0x14>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| clock-names = "timer"; | |
| status = "disabled"; | |
| }; | |
| timer5: timer@2c64 { | |
| compatible = "snps,dw-apb-timer"; | |
| reg = <0x2c64 0x14>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| clock-names = "timer"; | |
| status = "disabled"; | |
| }; | |
| timer6: timer@2c78 { | |
| compatible = "snps,dw-apb-timer"; | |
| reg = <0x2c78 0x14>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| clock-names = "timer"; | |
| status = "disabled"; | |
| }; | |
| timer7: timer@2c8c { | |
| compatible = "snps,dw-apb-timer"; | |
| reg = <0x2c8c 0x14>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| clock-names = "timer"; | |
| status = "disabled"; | |
| }; | |
| aic: interrupt-controller@3800 { | |
| compatible = "snps,dw-apb-ictl"; | |
| reg = <0x3800 0x30>; | |
| interrupt-controller; | |
| #interrupt-cells = <1>; | |
| interrupt-parent = <&gic>; | |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; | |
| }; | |
| }; | |
| chip: chip-control@ea0000 { | |
| compatible = "simple-mfd", "syscon"; | |
| reg = <0xea0000 0x400>, <0xdd0170 0x10>; | |
| chip_clk: clock { | |
| compatible = "marvell,berlin2q-clk"; | |
| #clock-cells = <1>; | |
| clocks = <&refclk>; | |
| clock-names = "refclk"; | |
| }; | |
| soc_pinctrl: pin-controller { | |
| compatible = "marvell,berlin2q-soc-pinctrl"; | |
| sd1_pmux: sd1-pmux { | |
| groups = "G31"; | |
| function = "sd1"; | |
| }; | |
| twsi0_pmux: twsi0-pmux { | |
| groups = "G6"; | |
| function = "twsi0"; | |
| }; | |
| twsi1_pmux: twsi1-pmux { | |
| groups = "G7"; | |
| function = "twsi1"; | |
| }; | |
| }; | |
| chip_rst: reset { | |
| compatible = "marvell,berlin2-reset"; | |
| #reset-cells = <2>; | |
| }; | |
| }; | |
| ahci: sata@e90000 { | |
| compatible = "marvell,berlin2q-ahci", "generic-ahci"; | |
| reg = <0xe90000 0x1000>; | |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&chip_clk CLKID_SATA>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| sata0: sata-port@0 { | |
| reg = <0>; | |
| phys = <&sata_phy 0>; | |
| status = "disabled"; | |
| }; | |
| sata1: sata-port@1 { | |
| reg = <1>; | |
| phys = <&sata_phy 1>; | |
| status = "disabled"; | |
| }; | |
| }; | |
| sata_phy: phy@e900a0 { | |
| compatible = "marvell,berlin2q-sata-phy"; | |
| reg = <0xe900a0 0x200>; | |
| clocks = <&chip_clk CLKID_SATA>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| #phy-cells = <1>; | |
| status = "disabled"; | |
| sata-phy@0 { | |
| reg = <0>; | |
| }; | |
| sata-phy@1 { | |
| reg = <1>; | |
| }; | |
| }; | |
| usb0: usb@ed0000 { | |
| compatible = "chipidea,usb2"; | |
| reg = <0xed0000 0x10000>; | |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&chip_clk CLKID_USB0>; | |
| phys = <&usb_phy0>; | |
| phy-names = "usb-phy"; | |
| status = "disabled"; | |
| }; | |
| usb1: usb@ee0000 { | |
| compatible = "chipidea,usb2"; | |
| reg = <0xee0000 0x10000>; | |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&chip_clk CLKID_USB1>; | |
| phys = <&usb_phy1>; | |
| phy-names = "usb-phy"; | |
| status = "disabled"; | |
| }; | |
| pwm: pwm@f20000 { | |
| compatible = "marvell,berlin-pwm"; | |
| reg = <0xf20000 0x40>; | |
| clocks = <&chip_clk CLKID_CFG>; | |
| #pwm-cells = <3>; | |
| }; | |
| apb@fc0000 { | |
| compatible = "simple-bus"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0 0xfc0000 0x10000>; | |
| interrupt-parent = <&sic>; | |
| wdt0: watchdog@1000 { | |
| compatible = "snps,dw-wdt"; | |
| reg = <0x1000 0x100>; | |
| clocks = <&refclk>; | |
| interrupts = <0>; | |
| }; | |
| wdt1: watchdog@2000 { | |
| compatible = "snps,dw-wdt"; | |
| reg = <0x2000 0x100>; | |
| clocks = <&refclk>; | |
| interrupts = <1>; | |
| }; | |
| wdt2: watchdog@3000 { | |
| compatible = "snps,dw-wdt"; | |
| reg = <0x3000 0x100>; | |
| clocks = <&refclk>; | |
| interrupts = <2>; | |
| }; | |
| sm_gpio1: gpio@5000 { | |
| compatible = "snps,dw-apb-gpio"; | |
| reg = <0x5000 0x400>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| portf: gpio-port@5 { | |
| compatible = "snps,dw-apb-gpio-port"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| ngpios = <32>; | |
| reg = <0>; | |
| }; | |
| }; | |
| i2c2: i2c@7000 { | |
| compatible = "snps,designware-i2c"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x7000 0x100>; | |
| interrupts = <6>; | |
| clocks = <&refclk>; | |
| pinctrl-0 = <&twsi2_pmux>; | |
| pinctrl-names = "default"; | |
| status = "disabled"; | |
| }; | |
| i2c3: i2c@8000 { | |
| compatible = "snps,designware-i2c"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0x8000 0x100>; | |
| interrupts = <7>; | |
| clocks = <&refclk>; | |
| pinctrl-0 = <&twsi3_pmux>; | |
| pinctrl-names = "default"; | |
| status = "disabled"; | |
| }; | |
| uart0: serial@9000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x9000 0x100>; | |
| interrupts = <8>; | |
| clocks = <&refclk>; | |
| reg-shift = <2>; | |
| pinctrl-0 = <&uart0_pmux>; | |
| pinctrl-names = "default"; | |
| status = "disabled"; | |
| }; | |
| uart1: serial@a000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0xa000 0x100>; | |
| interrupts = <9>; | |
| clocks = <&refclk>; | |
| reg-shift = <2>; | |
| pinctrl-0 = <&uart1_pmux>; | |
| pinctrl-names = "default"; | |
| status = "disabled"; | |
| }; | |
| sm_gpio0: gpio@c000 { | |
| compatible = "snps,dw-apb-gpio"; | |
| reg = <0xc000 0x400>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| porte: gpio-port@4 { | |
| compatible = "snps,dw-apb-gpio-port"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| ngpios = <32>; | |
| reg = <0>; | |
| }; | |
| }; | |
| sysctrl: pin-controller@d000 { | |
| compatible = "simple-mfd", "syscon"; | |
| reg = <0xd000 0x100>; | |
| sys_pinctrl: pin-controller { | |
| compatible = "marvell,berlin2q-system-pinctrl"; | |
| uart0_pmux: uart0-pmux { | |
| groups = "GSM12"; | |
| function = "uart0"; | |
| }; | |
| uart1_pmux: uart1-pmux { | |
| groups = "GSM14"; | |
| function = "uart1"; | |
| }; | |
| twsi2_pmux: twsi2-pmux { | |
| groups = "GSM13"; | |
| function = "twsi2"; | |
| }; | |
| twsi3_pmux: twsi3-pmux { | |
| groups = "GSM14"; | |
| function = "twsi3"; | |
| }; | |
| }; | |
| adc: adc { | |
| compatible = "marvell,berlin2-adc"; | |
| interrupts = <12>, <14>; | |
| interrupt-names = "adc", "tsen"; | |
| }; | |
| }; | |
| sic: interrupt-controller@e000 { | |
| compatible = "snps,dw-apb-ictl"; | |
| reg = <0xe000 0x30>; | |
| interrupt-controller; | |
| #interrupt-cells = <1>; | |
| interrupt-parent = <&gic>; | |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; | |
| }; | |
| }; | |
| }; | |
| }; |