| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Copyright 2012 ST-Ericsson AB | |
| * | |
| * Device Tree for the HREF+ prior to the v60 variant. | |
| */ | |
| #include "ste-href-ab8500.dtsi" | |
| #include "ste-href.dtsi" | |
| / { | |
| gpio_keys { | |
| button@1 { | |
| gpios = <&tc3589x_gpio 7 GPIO_ACTIVE_HIGH>; | |
| }; | |
| }; | |
| soc { | |
| /* Enable UART1 on this board */ | |
| serial@80121000 { | |
| status = "okay"; | |
| }; | |
| i2c@80004000 { | |
| tps61052@33 { | |
| compatible = "ti,tps61052"; | |
| reg = <0x33>; | |
| }; | |
| tc35892@42 { | |
| compatible = "toshiba,tc35892"; | |
| reg = <0x42>; | |
| interrupt-parent = <&gpio6>; | |
| interrupts = <25 IRQ_TYPE_EDGE_RISING>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&tc35892_hrefprev60_mode>; | |
| interrupt-controller; | |
| #interrupt-cells = <1>; | |
| tc3589x_gpio: tc3589x_gpio { | |
| compatible = "tc3589x-gpio"; | |
| interrupts = <0>; | |
| interrupt-controller; | |
| #interrupt-cells = <2>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| }; | |
| }; | |
| }; | |
| spi@80002000 { | |
| /* | |
| * On the first generation boards, this SSP/SPI port was connected | |
| * to the AB8500. | |
| */ | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&ssp0_hrefprev60_mode>; | |
| status = "okay"; | |
| }; | |
| // External Micro SD slot | |
| mmc@80126000 { | |
| cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>; | |
| }; | |
| pinctrl { | |
| /* Set this up using hogs */ | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&ipgpio_hrefprev60_mode>; | |
| ssp0 { | |
| ssp0_hrefprev60_mode: ssp0_hrefprev60_default { | |
| hrefprev60_mux { | |
| function = "ssp0"; | |
| groups = "ssp0_a_1"; | |
| }; | |
| hrefprev60_cfg1 { | |
| pins = "GPIO145_C13"; /* RXD */ | |
| ste,config = <&in_pd>; | |
| }; | |
| }; | |
| }; | |
| sdi0 { | |
| /* This additional pin needed on early MOP500 and HREFs previous to v60 */ | |
| sdi0_default_mode: sdi0_default { | |
| hrefprev60_mux { | |
| function = "mc0"; | |
| groups = "mc0dat31dir_a_1"; | |
| }; | |
| hrefprev60_cfg1 { | |
| pins = "GPIO21_AB3"; /* DAT31DIR */ | |
| ste,config = <&out_hi>; | |
| }; | |
| }; | |
| }; | |
| tc35892 { | |
| tc35892_hrefprev60_mode: tc35892_hrefprev60 { | |
| hrefprev60_cfg { | |
| pins = "GPIO217_AH12"; | |
| ste,config = <&gpio_in_pu>; | |
| }; | |
| }; | |
| }; | |
| ipgpio { | |
| ipgpio_hrefprev60_mode: ipgpio_hrefprev60 { | |
| hrefprev60_mux { | |
| function = "ipgpio"; | |
| groups = "ipgpio0_c_1", "ipgpio1_c_1"; | |
| }; | |
| hrefprev60_cfg1 { | |
| pins = "GPIO6_AF6", "GPIO7_AG5"; | |
| ste,config = <&in_pu>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; |