| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Copyright 2012 ST-Ericsson AB | |
| */ | |
| /dts-v1/; | |
| #include "ste-db8500.dtsi" | |
| #include "ste-href-ab8500.dtsi" | |
| #include "ste-hrefprev60.dtsi" | |
| #include "ste-href-stuib.dtsi" | |
| / { | |
| model = "ST-Ericsson HREF (pre-v60) and ST UIB"; | |
| compatible = "st-ericsson,mop500", "st-ericsson,u8500"; | |
| /* ST6G3244ME level translator for 1.8/2.9 V */ | |
| vmmci: regulator-gpio { | |
| compatible = "regulator-gpio"; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <2900000>; | |
| regulator-name = "mmci-reg"; | |
| regulator-type = "voltage"; | |
| startup-delay-us = <100>; | |
| states = <1800000 0x1 | |
| 2900000 0x0>; | |
| gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; | |
| enable-gpios = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; | |
| enable-active-high; | |
| }; | |
| soc { | |
| /* Reset line for the BU21013 touchscreen */ | |
| i2c@80110000 { | |
| /* Only one of these will be used */ | |
| bu21013_tp@5c { | |
| interrupt-parent = <&gpio2>; | |
| interrupts = <12 IRQ_TYPE_LEVEL_LOW>; | |
| touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; | |
| reset-gpios = <&tc3589x_gpio 13 GPIO_LINE_OPEN_DRAIN>; | |
| }; | |
| bu21013_tp@5d { | |
| interrupt-parent = <&gpio2>; | |
| interrupts = <12 IRQ_TYPE_LEVEL_LOW>; | |
| touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; | |
| reset-gpios = <&tc3589x_gpio 13 GPIO_LINE_OPEN_DRAIN>; | |
| }; | |
| }; | |
| }; | |
| }; |