| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Broadcom BCM63138 DSL SoCs Device Tree | |
| */ | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| / { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "brcm,bcm63138", "brcm,bcmbca"; | |
| model = "Broadcom BCM963138 Reference Board"; | |
| interrupt-parent = <&gic>; | |
| aliases { | |
| uart0 = &serial0; | |
| uart1 = &serial1; | |
| }; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| cpu@0 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a9"; | |
| next-level-cache = <&L2>; | |
| reg = <0>; | |
| enable-method = "brcm,bcm63138"; | |
| }; | |
| cpu@1 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a9"; | |
| next-level-cache = <&L2>; | |
| reg = <1>; | |
| enable-method = "brcm,bcm63138"; | |
| resets = <&pmb0 4 1>; | |
| }; | |
| }; | |
| clocks { | |
| /* UBUS peripheral clock */ | |
| periph_clk: periph_clk { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <50000000>; | |
| clock-output-names = "periph"; | |
| }; | |
| /* peripheral clock for system timer */ | |
| axi_clk: axi_clk { | |
| #clock-cells = <0>; | |
| compatible = "fixed-factor-clock"; | |
| clocks = <&armpll>; | |
| clock-div = <2>; | |
| clock-mult = <1>; | |
| }; | |
| /* APB bus clock */ | |
| apb_clk: apb_clk { | |
| #clock-cells = <0>; | |
| compatible = "fixed-factor-clock"; | |
| clocks = <&armpll>; | |
| clock-div = <4>; | |
| clock-mult = <1>; | |
| }; | |
| hsspi_pll: hsspi-pll { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <400000000>; | |
| }; | |
| }; | |
| /* ARM bus */ | |
| axi@80000000 { | |
| compatible = "simple-bus"; | |
| ranges = <0 0x80000000 0x784000>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| L2: cache-controller@1d000 { | |
| compatible = "arm,pl310-cache"; | |
| reg = <0x1d000 0x1000>; | |
| cache-unified; | |
| cache-level = <2>; | |
| cache-size = <524288>; | |
| cache-sets = <1024>; | |
| cache-line-size = <32>; | |
| interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>; | |
| }; | |
| scu: scu@1e000 { | |
| compatible = "arm,cortex-a9-scu"; | |
| reg = <0x1e000 0x100>; | |
| }; | |
| gic: interrupt-controller@1f000 { | |
| compatible = "arm,cortex-a9-gic"; | |
| reg = <0x1f000 0x1000 | |
| 0x1e100 0x100>; | |
| #interrupt-cells = <3>; | |
| #address-cells = <0>; | |
| interrupt-controller; | |
| }; | |
| global_timer: timer@1e200 { | |
| compatible = "arm,cortex-a9-global-timer"; | |
| reg = <0x1e200 0x20>; | |
| interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; | |
| clocks = <&axi_clk>; | |
| }; | |
| local_timer: local-timer@1e600 { | |
| compatible = "arm,cortex-a9-twd-timer"; | |
| reg = <0x1e600 0x20>; | |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | | |
| IRQ_TYPE_EDGE_RISING)>; | |
| clocks = <&axi_clk>; | |
| }; | |
| twd_watchdog: watchdog@1e620 { | |
| compatible = "arm,cortex-a9-twd-wdt"; | |
| reg = <0x1e620 0x20>; | |
| interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | | |
| IRQ_TYPE_LEVEL_HIGH)>; | |
| }; | |
| armpll: armpll@20000 { | |
| #clock-cells = <0>; | |
| compatible = "brcm,bcm63138-armpll"; | |
| clocks = <&periph_clk>; | |
| reg = <0x20000 0xf00>; | |
| }; | |
| pmb0: reset-controller@4800c0 { | |
| compatible = "brcm,bcm63138-pmb"; | |
| reg = <0x4800c0 0x10>; | |
| #reset-cells = <2>; | |
| }; | |
| pmb1: reset-controller@4800e0 { | |
| compatible = "brcm,bcm63138-pmb"; | |
| reg = <0x4800e0 0x10>; | |
| #reset-cells = <2>; | |
| }; | |
| ahci: sata@a000 { | |
| compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci"; | |
| reg-names = "ahci", "top-ctrl"; | |
| reg = <0xa000 0x9ac>, <0x8040 0x24>; | |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| resets = <&pmb0 3 1>; | |
| reset-names = "ahci"; | |
| status = "disabled"; | |
| sata0: sata-port@0 { | |
| reg = <0>; | |
| phys = <&sata_phy0>; | |
| }; | |
| }; | |
| sata_phy: sata-phy@8100 { | |
| compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3"; | |
| reg = <0x8100 0x1e00>; | |
| reg-names = "phy"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| sata_phy0: sata-phy@0 { | |
| reg = <0>; | |
| #phy-cells = <0>; | |
| }; | |
| }; | |
| }; | |
| /* Legacy UBUS base */ | |
| ubus@fffe8000 { | |
| compatible = "simple-bus"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0 0xfffe8000 0x10000>; | |
| timer: timer@80 { | |
| compatible = "brcm,bcm6328-timer", "syscon"; | |
| reg = <0x80 0x3c>; | |
| }; | |
| /* GPIOs 0 .. 31 */ | |
| gpio0: gpio@100 { | |
| compatible = "brcm,bcm6345-gpio"; | |
| reg = <0x100 0x04>, <0x114 0x04>; | |
| reg-names = "dirout", "dat"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| status = "disabled"; | |
| }; | |
| /* GPIOs 32 .. 63 */ | |
| gpio1: gpio@104 { | |
| compatible = "brcm,bcm6345-gpio"; | |
| reg = <0x104 0x04>, <0x118 0x04>; | |
| reg-names = "dirout", "dat"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| status = "disabled"; | |
| }; | |
| /* GPIOs 64 .. 95 */ | |
| gpio2: gpio@108 { | |
| compatible = "brcm,bcm6345-gpio"; | |
| reg = <0x108 0x04>, <0x11c 0x04>; | |
| reg-names = "dirout", "dat"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| status = "disabled"; | |
| }; | |
| /* GPIOs 96 .. 127 */ | |
| gpio3: gpio@10c { | |
| compatible = "brcm,bcm6345-gpio"; | |
| reg = <0x10c 0x04>, <0x120 0x04>; | |
| reg-names = "dirout", "dat"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| status = "disabled"; | |
| }; | |
| /* GPIOs 128 .. 159 */ | |
| gpio4: gpio@110 { | |
| compatible = "brcm,bcm6345-gpio"; | |
| reg = <0x110 0x04>, <0x124 0x04>; | |
| reg-names = "dirout", "dat"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| status = "disabled"; | |
| }; | |
| rng@300 { | |
| compatible = "brcm,iproc-rng200"; | |
| reg = <0x300 0x28>; | |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; | |
| }; | |
| serial0: serial@600 { | |
| compatible = "brcm,bcm6345-uart"; | |
| reg = <0x600 0x1b>; | |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&periph_clk>; | |
| clock-names = "periph"; | |
| status = "disabled"; | |
| }; | |
| serial1: serial@620 { | |
| compatible = "brcm,bcm6345-uart"; | |
| reg = <0x620 0x1b>; | |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&periph_clk>; | |
| clock-names = "periph"; | |
| status = "disabled"; | |
| }; | |
| leds: led-controller@700 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "brcm,bcm63138-leds"; | |
| reg = <0x700 0xdc>; | |
| status = "disabled"; | |
| }; | |
| hsspi: spi@1000 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0"; | |
| reg = <0x1000 0x600>; | |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&hsspi_pll &hsspi_pll>; | |
| clock-names = "hsspi", "pll"; | |
| num-cs = <8>; | |
| status = "disabled"; | |
| }; | |
| nand_controller: nand-controller@2000 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand"; | |
| reg = <0x2000 0x600>, <0xf0 0x10>; | |
| reg-names = "nand", "nand-int-base"; | |
| status = "disabled"; | |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; | |
| interrupt-names = "nand_ctlrdy"; | |
| nandcs: nand@0 { | |
| compatible = "brcm,nandcs"; | |
| reg = <0>; | |
| }; | |
| }; | |
| serial@4400 { | |
| compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart"; | |
| reg = <0x4400 0x1e0>; | |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; | |
| }; | |
| bootlut: bootlut@8000 { | |
| compatible = "brcm,bcm63138-bootlut"; | |
| reg = <0x8000 0x50>; | |
| }; | |
| i2c0: i2c@3e00 { | |
| compatible = "brcm,brcmper-i2c"; | |
| reg = <0x3e00 0x60>; | |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| }; | |
| pl081_dma: dma-controller@d000 { | |
| compatible = "arm,pl081", "arm,primecell"; | |
| // The magic B105F00D info is missing | |
| arm,primecell-periphid = <0x00041081>; | |
| reg = <0xd000 0x1000>; | |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; | |
| memcpy-burst-size = <256>; | |
| memcpy-bus-width = <32>; | |
| clocks = <&periph_clk>; | |
| clock-names = "apb_pclk"; | |
| #dma-cells = <2>; | |
| }; | |
| reboot { | |
| compatible = "syscon-reboot"; | |
| regmap = <&timer>; | |
| offset = <0x34>; | |
| mask = <1>; | |
| }; | |
| }; | |
| }; |