| // SPDX-License-Identifier: GPL-2.0 | |
| /* This include file covers the common peripherals and configuration between | |
| * bcm2835, bcm2836 and bcm2837 implementations. | |
| */ | |
| / { | |
| interrupt-parent = <&intc>; | |
| soc { | |
| dma: dma-controller@7e007000 { | |
| compatible = "brcm,bcm2835-dma"; | |
| reg = <0x7e007000 0xf00>; | |
| interrupts = <1 16>, | |
| <1 17>, | |
| <1 18>, | |
| <1 19>, | |
| <1 20>, | |
| <1 21>, | |
| <1 22>, | |
| <1 23>, | |
| <1 24>, | |
| <1 25>, | |
| <1 26>, | |
| /* dma channel 11-14 share one irq */ | |
| <1 27>, | |
| <1 27>, | |
| <1 27>, | |
| <1 27>, | |
| /* unused shared irq for all channels */ | |
| <1 28>; | |
| interrupt-names = "dma0", | |
| "dma1", | |
| "dma2", | |
| "dma3", | |
| "dma4", | |
| "dma5", | |
| "dma6", | |
| "dma7", | |
| "dma8", | |
| "dma9", | |
| "dma10", | |
| "dma11", | |
| "dma12", | |
| "dma13", | |
| "dma14", | |
| "dma-shared-all"; | |
| #dma-cells = <1>; | |
| brcm,dma-channel-mask = <0x7f35>; | |
| }; | |
| intc: interrupt-controller@7e00b200 { | |
| compatible = "brcm,bcm2835-armctrl-ic"; | |
| reg = <0x7e00b200 0x200>; | |
| interrupt-controller; | |
| #interrupt-cells = <2>; | |
| }; | |
| pm: watchdog@7e100000 { | |
| compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; | |
| #power-domain-cells = <1>; | |
| #reset-cells = <1>; | |
| reg = <0x7e100000 0x114>, | |
| <0x7e00a000 0x24>; | |
| reg-names = "pm", "asb"; | |
| clocks = <&clocks BCM2835_CLOCK_V3D>, | |
| <&clocks BCM2835_CLOCK_PERI_IMAGE>, | |
| <&clocks BCM2835_CLOCK_H264>, | |
| <&clocks BCM2835_CLOCK_ISP>; | |
| clock-names = "v3d", "peri_image", "h264", "isp"; | |
| system-power-controller; | |
| }; | |
| rng@7e104000 { | |
| compatible = "brcm,bcm2835-rng"; | |
| reg = <0x7e104000 0x10>; | |
| interrupts = <2 29>; | |
| }; | |
| pixelvalve@7e206000 { | |
| compatible = "brcm,bcm2835-pixelvalve0"; | |
| reg = <0x7e206000 0x100>; | |
| interrupts = <2 13>; /* pwa0 */ | |
| }; | |
| pixelvalve@7e207000 { | |
| compatible = "brcm,bcm2835-pixelvalve1"; | |
| reg = <0x7e207000 0x100>; | |
| interrupts = <2 14>; /* pwa1 */ | |
| }; | |
| thermal: thermal@7e212000 { | |
| compatible = "brcm,bcm2835-thermal"; | |
| reg = <0x7e212000 0x8>; | |
| clocks = <&clocks BCM2835_CLOCK_TSENS>; | |
| #thermal-sensor-cells = <0>; | |
| status = "disabled"; | |
| }; | |
| i2c2: i2c@7e805000 { | |
| compatible = "brcm,bcm2835-i2c"; | |
| reg = <0x7e805000 0x1000>; | |
| interrupts = <2 21>; | |
| clocks = <&clocks BCM2835_CLOCK_VPU>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "okay"; | |
| }; | |
| vec: vec@7e806000 { | |
| compatible = "brcm,bcm2835-vec"; | |
| reg = <0x7e806000 0x1000>; | |
| clocks = <&clocks BCM2835_CLOCK_VEC>; | |
| interrupts = <2 27>; | |
| status = "disabled"; | |
| }; | |
| pixelvalve@7e807000 { | |
| compatible = "brcm,bcm2835-pixelvalve2"; | |
| reg = <0x7e807000 0x100>; | |
| interrupts = <2 10>; /* pixelvalve */ | |
| }; | |
| hdmi: hdmi@7e902000 { | |
| compatible = "brcm,bcm2835-hdmi"; | |
| reg = <0x7e902000 0x600>, | |
| <0x7e808000 0x100>; | |
| interrupts = <2 8>, <2 9>; | |
| ddc = <&i2c2>; | |
| clocks = <&clocks BCM2835_PLLH_PIX>, | |
| <&clocks BCM2835_CLOCK_HSM>; | |
| clock-names = "pixel", "hdmi"; | |
| dmas = <&dma 17>; | |
| dma-names = "audio-rx"; | |
| status = "disabled"; | |
| }; | |
| v3d: v3d@7ec00000 { | |
| compatible = "brcm,bcm2835-v3d"; | |
| reg = <0x7ec00000 0x1000>; | |
| interrupts = <1 10>; | |
| }; | |
| }; | |
| vc4: gpu { | |
| compatible = "brcm,bcm2835-vc4"; | |
| }; | |
| }; | |
| &cpu_thermal { | |
| thermal-sensors = <&thermal>; | |
| }; | |
| &gpio { | |
| i2c_slave_gpio18: i2c-slave-gpio18 { | |
| brcm,pins = <18 19 20 21>; | |
| brcm,function = <BCM2835_FSEL_ALT3>; | |
| }; | |
| jtag_gpio4: jtag-gpio4 { | |
| brcm,pins = <4 5 6 12 13>; | |
| brcm,function = <BCM2835_FSEL_ALT5>; | |
| }; | |
| pwm0_gpio12: pwm0-gpio12 { | |
| brcm,pins = <12>; | |
| brcm,function = <BCM2835_FSEL_ALT0>; | |
| }; | |
| pwm0_gpio18: pwm0-gpio18 { | |
| brcm,pins = <18>; | |
| brcm,function = <BCM2835_FSEL_ALT5>; | |
| }; | |
| pwm0_gpio40: pwm0-gpio40 { | |
| brcm,pins = <40>; | |
| brcm,function = <BCM2835_FSEL_ALT0>; | |
| }; | |
| pwm1_gpio13: pwm1-gpio13 { | |
| brcm,pins = <13>; | |
| brcm,function = <BCM2835_FSEL_ALT0>; | |
| }; | |
| pwm1_gpio19: pwm1-gpio19 { | |
| brcm,pins = <19>; | |
| brcm,function = <BCM2835_FSEL_ALT5>; | |
| }; | |
| pwm1_gpio41: pwm1-gpio41 { | |
| brcm,pins = <41>; | |
| brcm,function = <BCM2835_FSEL_ALT0>; | |
| }; | |
| pwm1_gpio45: pwm1-gpio45 { | |
| brcm,pins = <45>; | |
| brcm,function = <BCM2835_FSEL_ALT0>; | |
| }; | |
| }; | |
| &i2s { | |
| dmas = <&dma 2>, <&dma 3>; | |
| dma-names = "tx", "rx"; | |
| }; | |
| &sdhost { | |
| dmas = <&dma 13>; | |
| dma-names = "rx-tx"; | |
| }; | |
| &spi { | |
| dmas = <&dma 6>, <&dma 7>; | |
| dma-names = "tx", "rx"; | |
| }; |