| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/pwm/pwm-nexus-node.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: PWM Nexus node properties | |
| description: > | |
| Platforms can have a standardized connector/expansion slot that exposes PWMs | |
| signals to expansion boards. | |
| A nexus node allows to remap a phandle list in a consumer node through a | |
| connector node in a generic way. With this remapping, the consumer node needs | |
| to know only about the nexus node. Resources behind the nexus node are | |
| decoupled by the nexus node itself. | |
| maintainers: | |
| - Herve Codina <herve.codina@bootlin.com> | |
| select: true | |
| properties: | |
| '#pwm-cells': true | |
| pwm-map: | |
| $ref: /schemas/types.yaml#/definitions/uint32-matrix | |
| pwm-map-mask: | |
| $ref: /schemas/types.yaml#/definitions/uint32-array | |
| pwm-map-pass-thru: | |
| $ref: /schemas/types.yaml#/definitions/uint32-array | |
| dependentRequired: | |
| pwm-map: ['#pwm-cells'] | |
| pwm-map-mask: [ pwm-map ] | |
| pwm-map-pass-thru: [ pwm-map ] | |
| additionalProperties: true | |
| examples: | |
| - | | |
| pwm1: pwm@100 { | |
| reg = <0x100 0x10>; | |
| #pwm-cells = <3>; | |
| }; | |
| pwm2: pwm@200 { | |
| reg = <0x200 0x10>; | |
| #pwm-cells = <3>; | |
| }; | |
| connector: connector { | |
| #pwm-cells = <3>; | |
| pwm-map = <0 0 0 &pwm1 1 0 0>, | |
| <1 0 0 &pwm2 4 0 0>, | |
| <2 0 0 &pwm1 3 0 0>; | |
| pwm-map-mask = <0xffffffff 0x0 0x0>; | |
| pwm-map-pass-thru = <0x0 0xffffffff 0xffffffff>; | |
| }; | |
| device { | |
| pwms = <&connector 1 57000 0>; | |
| }; |