| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/pinctrl/microchip,pic32mzda-pinctrl.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Microchip PIC32 Pin Controller | |
| maintainers: | |
| - Linus Walleij <linusw@kernel.org> | |
| description: | |
| PIC32 pin configuration node is a node of a group of pins which can be used | |
| for a specific device or function. This node represents configurations of | |
| pins, optional function, and optional mux related configuration. | |
| properties: | |
| compatible: | |
| const: microchip,pic32mzda-pinctrl | |
| reg: | |
| maxItems: 1 | |
| clocks: | |
| maxItems: 1 | |
| $defs: | |
| pin-node: | |
| type: object | |
| allOf: | |
| - $ref: /schemas/pinctrl/pincfg-node.yaml# | |
| - $ref: /schemas/pinctrl/pinmux-node.yaml# | |
| properties: | |
| pins: | |
| description: List of pins to which the configuration applies. | |
| items: | |
| type: string | |
| minItems: 1 | |
| function: true | |
| bias-pull-up: true | |
| bias-pull-down: true | |
| input-enable: true | |
| output-low: true | |
| output-high: true | |
| microchip,digital: | |
| description: Enable digital I/O. | |
| type: boolean | |
| microchip,analog: | |
| description: Enable analog I/O. | |
| type: boolean | |
| required: | |
| - pins | |
| unevaluatedProperties: false | |
| additionalProperties: | |
| oneOf: | |
| - additionalProperties: | |
| $ref: '#/$defs/pin-node' | |
| - $ref: '#/$defs/pin-node' | |
| required: | |
| - compatible | |
| - reg | |
| - clocks | |
| examples: | |
| - | | |
| #include <dt-bindings/clock/microchip,pic32-clock.h> | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| pic32_pinctrl: pinctrl@1f801400 { | |
| compatible = "microchip,pic32mzda-pinctrl"; | |
| reg = <0x1f801400 0x400>; | |
| clocks = <&rootclk PB1CLK>; | |
| pinctrl_uart2: pinctrl_uart2 { | |
| uart2-tx { | |
| pins = "G9"; | |
| function = "U2TX"; | |
| microchip,digital; | |
| output-low; | |
| }; | |
| uart2-rx { | |
| pins = "B0"; | |
| function = "U2RX"; | |
| microchip,digital; | |
| input-enable; | |
| }; | |
| }; | |
| }; | |
| uart2: serial@1f822200 { | |
| compatible = "microchip,pic32mzda-uart"; | |
| reg = <0x1f822200 0x50>; | |
| interrupts = <145 IRQ_TYPE_LEVEL_HIGH>, | |
| <146 IRQ_TYPE_LEVEL_HIGH>, | |
| <147 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&rootclk PB2CLK>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&pinctrl_uart2>; | |
| }; |