| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/pinctrl/mediatek,mt6858-pinctrl.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: MediaTek MT6858 Pin Controller | |
| maintainers: | |
| - Nikolai Burov <nikolai.burov@jolla.com> | |
| description: | |
| The MediaTek's MT6858 Pin controller is used to control SoC pins. | |
| properties: | |
| compatible: | |
| const: mediatek,mt6858-pinctrl | |
| reg: | |
| items: | |
| - description: gpio base | |
| - description: lm group IO | |
| - description: rb group IO | |
| - description: bm2 group IO | |
| - description: bm group IO | |
| - description: bm1 group IO | |
| - description: lt group IO | |
| - description: lt1 group IO | |
| - description: rt group IO | |
| - description: rt1 group IO | |
| - description: eint south group IO | |
| - description: eint west group IO | |
| - description: eint east group IO | |
| - description: eint center group IO | |
| reg-names: | |
| items: | |
| - const: base | |
| - const: lm | |
| - const: rb | |
| - const: bm2 | |
| - const: bm | |
| - const: bm1 | |
| - const: lt | |
| - const: lt1 | |
| - const: rt | |
| - const: rt1 | |
| - const: eint0 | |
| - const: eint1 | |
| - const: eint2 | |
| - const: eint3 | |
| interrupts: | |
| maxItems: 1 | |
| interrupt-controller: true | |
| '#interrupt-cells': | |
| const: 2 | |
| gpio-controller: true | |
| '#gpio-cells': | |
| const: 2 | |
| gpio-ranges: | |
| maxItems: 1 | |
| gpio-line-names: true | |
| # PIN CONFIGURATION NODES | |
| patternProperties: | |
| '-pins$': | |
| type: object | |
| additionalProperties: false | |
| patternProperties: | |
| '^pins': | |
| type: object | |
| $ref: /schemas/pinctrl/pincfg-node.yaml | |
| additionalProperties: false | |
| description: | |
| A pinctrl node should contain at least one subnodes representing the | |
| pinctrl groups available on the machine. Each subnode will list the | |
| pins it needs, and how they should be configured, with regard to muxer | |
| configuration, pullups, drive strength, input enable/disable and input | |
| schmitt. | |
| properties: | |
| pinmux: | |
| description: | |
| Integer array, represents gpio pin number and mux setting. | |
| Supported pin number and mux varies for different SoCs, and are | |
| defined as macros in arch/arm64/boot/dts/mediatek/mt6858-pinfunc.h | |
| for this SoC. | |
| drive-strength: | |
| enum: [2, 4, 6, 8, 10, 12, 14, 16] | |
| bias-pull-down: | |
| oneOf: | |
| - type: boolean | |
| description: normal pull down. | |
| - enum: [100, 101, 102, 103] | |
| description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_ | |
| defines in dt-bindings/pinctrl/mt65xx.h. | |
| - enum: [200, 201, 202, 203] | |
| description: RSEL pull down type. See MTK_PULL_SET_RSEL_ defines | |
| in dt-bindings/pinctrl/mt65xx.h. | |
| bias-pull-up: | |
| oneOf: | |
| - type: boolean | |
| description: normal pull up. | |
| - enum: [100, 101, 102, 103] | |
| description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_ | |
| defines in dt-bindings/pinctrl/mt65xx.h. | |
| - enum: [200, 201, 202, 203] | |
| description: RSEL pull up type. See MTK_PULL_SET_RSEL_ defines | |
| in dt-bindings/pinctrl/mt65xx.h. | |
| bias-disable: true | |
| output-high: true | |
| output-low: true | |
| input-enable: true | |
| input-disable: true | |
| input-schmitt-enable: true | |
| input-schmitt-disable: true | |
| required: | |
| - pinmux | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - interrupt-controller | |
| - '#interrupt-cells' | |
| - gpio-controller | |
| - '#gpio-cells' | |
| - gpio-ranges | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/pinctrl/mt65xx.h> | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| #define PINMUX_GPIO149__FUNC_SCL5 (MTK_PIN_NO(149) | 1) | |
| #define PINMUX_GPIO150__FUNC_SDA5 (MTK_PIN_NO(150) | 1) | |
| pio: pinctrl@10005000 { | |
| compatible = "mediatek,mt6858-pinctrl"; | |
| reg = <0x10005000 0x1000>, | |
| <0x11b20000 0x1000>, | |
| <0x11c10000 0x1000>, | |
| <0x11d10000 0x1000>, | |
| <0x11d30000 0x1000>, | |
| <0x11d40000 0x1000>, | |
| <0x11e20000 0x1000>, | |
| <0x11e30000 0x1000>, | |
| <0x11ed0000 0x1000>, | |
| <0x11ee0000 0x1000>, | |
| <0x11b00000 0x1000>, | |
| <0x11e60000 0x1000>, | |
| <0x11e80000 0x1000>, | |
| <0x1c01e000 0x1000>; | |
| reg-names = "base", "lm", "rb", "bm2", "bm", "bm1", "lt", "lt1", | |
| "rt", "rt1", "eint0", "eint1", "eint2", "eint3"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| gpio-ranges = <&pio 0 0 197>; | |
| interrupt-controller; | |
| interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>; | |
| #interrupt-cells = <2>; | |
| i2c5-pins { | |
| pins { | |
| pinmux = <PINMUX_GPIO149__FUNC_SCL5>, | |
| <PINMUX_GPIO150__FUNC_SDA5>; | |
| bias-disable; | |
| }; | |
| }; | |
| }; |