| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/phy/spacemit,k3-combo-phy.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Spacemit K3 PCIE/USB3 Comb PHY | |
| maintainers: | |
| - Inochi Amaoto <inochiama@gmail.com> | |
| properties: | |
| compatible: | |
| const: spacemit,k3-combo-phy | |
| reg: | |
| maxItems: 1 | |
| "#phy-cells": | |
| const: 2 | |
| description: | |
| The first one is phy id, the second one is phy type. This | |
| only supports types are PCIe and USB . | |
| spacemit,apb-spare: | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| description: | |
| Phandle to APB SPARE system controller interface, used for | |
| PHY calibration. | |
| spacemit,apmu: | |
| $ref: /schemas/types.yaml#/definitions/phandle-array | |
| items: | |
| - items: | |
| - description: phandle of APMU syscon | |
| - description: configuration of the PHY lanes | |
| description: | | |
| Phandle to control PHY mux configuration. The configuration | |
| is described as follows: | |
| bit 4: 0 - PCIe A x8 mode, 1 - PCIe lane share mode | |
| bit 3: 0 - PCIe A x4 mode, 1 - PCIe A x2 and PCIe B x2 mode | |
| bit 2: 0 - PCIe C lane 0 is PCIe mode , 1 - USB mode | |
| bit 1: 0 - PCIe C lane 1 is PCIe mode , 1 - USB mode | |
| bit 0: 0 - PCIe D lane is PCIe mode , 1 - USB mode | |
| The bit[3:0] is only valid when bit 4 is 1. | |
| This mux control does not affect the PHY for PCIe E, it is always | |
| in PCIe mode. | |
| required: | |
| - compatible | |
| - reg | |
| - "#phy-cells" | |
| - spacemit,apb-spare | |
| - spacemit,apmu | |
| additionalProperties: false | |
| examples: | |
| - | | |
| phy@81d00000 { | |
| compatible = "spacemit,k3-combo-phy"; | |
| reg = <0x81d00000 0x600000>; | |
| #phy-cells = <2>; | |
| spacemit,apb-spare = <&apb_spare>; | |
| spacemit,apmu = <&apmu 0x00>; | |
| }; |