| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/phy/qcom,dsi-phy-28nm.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Qualcomm Display DSI 28nm PHY | |
| maintainers: | |
| - Krishna Manikandan <quic_mkrishn@quicinc.com> | |
| allOf: | |
| - $ref: qcom,dsi-phy-common.yaml# | |
| properties: | |
| compatible: | |
| enum: | |
| - qcom,dsi-phy-28nm-8226 | |
| - qcom,dsi-phy-28nm-8937 | |
| - qcom,dsi-phy-28nm-8960 | |
| - qcom,dsi-phy-28nm-hpm | |
| - qcom,dsi-phy-28nm-hpm-fam-b | |
| - qcom,dsi-phy-28nm-lp | |
| reg: | |
| items: | |
| - description: dsi pll register set | |
| - description: dsi phy register set | |
| - description: dsi phy regulator register set | |
| reg-names: | |
| items: | |
| - const: dsi_pll | |
| - const: dsi_phy | |
| - const: dsi_phy_regulator | |
| vddio-supply: | |
| description: Phandle to vdd-io regulator device node. | |
| qcom,dsi-phy-regulator-ldo-mode: | |
| type: boolean | |
| description: Indicates if the LDO mode PHY regulator is wanted. | |
| required: | |
| - compatible | |
| - reg | |
| - reg-names | |
| - vddio-supply | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/clock/qcom,dispcc-sdm845.h> | |
| #include <dt-bindings/clock/qcom,rpmh.h> | |
| dsi-phy@fd922a00 { | |
| compatible = "qcom,dsi-phy-28nm-lp"; | |
| reg = <0xfd922a00 0xd4>, | |
| <0xfd922b00 0x2b0>, | |
| <0xfd922d80 0x7b>; | |
| reg-names = "dsi_pll", | |
| "dsi_phy", | |
| "dsi_phy_regulator"; | |
| #clock-cells = <1>; | |
| #phy-cells = <0>; | |
| vddio-supply = <&vddio_reg>; | |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, | |
| <&rpmhcc RPMH_CXO_CLK>; | |
| clock-names = "iface", "ref"; | |
| }; | |
| ... |