| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/phy/nxp,tja1145.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: TJA1145 CAN transceiver | |
| maintainers: | |
| - Dimitri Fedrau <dimitri.fedrau@liebherr.com> | |
| allOf: | |
| - $ref: /schemas/spi/spi-peripheral-props.yaml# | |
| properties: | |
| compatible: | |
| const: nxp,tja1145 | |
| interrupts: | |
| maxItems: 1 | |
| reg: | |
| maxItems: 1 | |
| "#phy-cells": | |
| const: 0 | |
| spi-cpha: true | |
| spi-max-frequency: | |
| maximum: 4000000 | |
| spi-cs-setup-delay-ns: | |
| minimum: 50 | |
| default: 50 | |
| spi-cs-hold-delay-ns: | |
| minimum: 50 | |
| default: 50 | |
| spi-cs-inactive-delay-ns: | |
| minimum: 250 | |
| default: 250 | |
| vcc-supply: | |
| description: | |
| CAN transceiver supply voltage | |
| vio-supply: | |
| description: | |
| Supply voltage for I/O level adaptor | |
| vbat-supply: | |
| description: | |
| Battery supply voltage | |
| required: | |
| - compatible | |
| - reg | |
| - "#phy-cells" | |
| - spi-cpha | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| spi { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| can-phy@0 { | |
| compatible = "nxp,tja1145"; | |
| interrupt-parent = <&gpio0>; | |
| interrupts = <31 IRQ_TYPE_LEVEL_LOW>; | |
| reg = <0>; | |
| #phy-cells = <0>; | |
| spi-cpha; | |
| spi-max-frequency = <4000000>; | |
| spi-cs-setup-delay-ns = <50>; | |
| spi-cs-hold-delay-ns = <50>; | |
| spi-cs-inactive-delay-ns = <250>; | |
| vcc-supply = <®_5v0>; | |
| vio-supply = <®_3v3>; | |
| vbat-supply = <®_24v0>; | |
| }; | |
| }; |