| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/nvmem/layouts/u-boot,env.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: U-Boot environment variables layout | |
| description: | | |
| U-Boot uses environment variables to store device parameters and | |
| configuration. They may be used for booting process, setup or keeping end user | |
| info. | |
| Data is stored using U-Boot specific formats (variant specific header and NUL | |
| separated key-value pairs). | |
| Environment data can be stored on various storage entities, e.g.: | |
| 1. Raw flash partition | |
| 2. UBI volume | |
| This binding allows marking storage device (as containing env data) and | |
| specifying used format. | |
| Variables can be defined as NVMEM device subnodes. | |
| maintainers: | |
| - Rafał Miłecki <rafal@milecki.pl> | |
| properties: | |
| compatible: | |
| oneOf: | |
| - description: A standalone env data block | |
| const: u-boot,env | |
| - description: Two redundant blocks with active one flagged | |
| const: u-boot,env-redundant-bool | |
| - description: Two redundant blocks with active having higher counter | |
| const: u-boot,env-redundant-count | |
| - description: Broadcom's variant with custom header | |
| const: brcm,env | |
| reg: | |
| description: Partition offset and size for env on top of MTD | |
| maxItems: 1 | |
| bootcmd: | |
| type: object | |
| description: Command to use for automatic booting | |
| env-size: | |
| description: | |
| Size in bytes of the environment data used by U-Boot for CRC | |
| calculation. If omitted, the full NVMEM region size is used. | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| ethaddr: | |
| type: object | |
| description: Ethernet interfaces base MAC address. | |
| additionalProperties: false | |
| properties: | |
| "#nvmem-cell-cells": | |
| description: The first argument is a MAC address offset. | |
| const: 1 | |
| allOf: | |
| - if: | |
| properties: | |
| $nodename: | |
| not: | |
| contains: | |
| pattern: "^partition@[0-9a-f]+$" | |
| then: | |
| properties: | |
| reg: false | |
| additionalProperties: false | |
| examples: | |
| - | | |
| partitions { | |
| compatible = "fixed-partitions"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| partition@0 { | |
| reg = <0x0 0x40000>; | |
| label = "u-boot"; | |
| read-only; | |
| }; | |
| env: partition@40000 { | |
| compatible = "u-boot,env"; | |
| reg = <0x40000 0x10000>; | |
| mac: ethaddr { | |
| #nvmem-cell-cells = <1>; | |
| }; | |
| }; | |
| }; | |
| - | | |
| partitions { | |
| compatible = "fixed-partitions"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| partition@0 { | |
| reg = <0x0 0x100000>; | |
| compatible = "brcm,u-boot"; | |
| label = "u-boot"; | |
| partition-u-boot-env { | |
| compatible = "brcm,env"; | |
| env-size = <0x20000>; | |
| ethaddr { | |
| }; | |
| }; | |
| }; | |
| }; | |
| - | | |
| partition@0 { | |
| reg = <0x0 0x100000>; | |
| label = "ubi"; | |
| compatible = "linux,ubi"; | |
| volumes { | |
| ubi-volume-u-boot-env { | |
| volname = "env"; | |
| nvmem-layout { | |
| compatible = "u-boot,env"; | |
| ethaddr { | |
| #nvmem-cell-cells = <1>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; |