| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/net/wireless/marvell,sd8787.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices | |
| maintainers: | |
| - Brian Norris <briannorris@chromium.org> | |
| - Frank Li <Frank.Li@nxp.com> | |
| description: | |
| This node provides properties for describing the Marvell SDIO/PCIE wireless device. | |
| The node is expected to be specified as a child node to the SDIO/PCIE controller that | |
| connects the device to the system. | |
| properties: | |
| compatible: | |
| enum: | |
| - marvell,sd8787 | |
| - marvell,sd8897 | |
| - marvell,sd8978 | |
| - marvell,sd8997 | |
| - nxp,iw416 | |
| - pci11ab,2b42 | |
| - pci1b4b,2b42 | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| wakeup-source: true | |
| marvell,caldata-txpwrlimit-2g: | |
| $ref: /schemas/types.yaml#/definitions/uint8-array | |
| description: Calibration data for the 2GHz band. | |
| maxItems: 566 | |
| marvell,caldata-txpwrlimit-5g-sub0: | |
| $ref: /schemas/types.yaml#/definitions/uint8-array | |
| description: Calibration data for sub-band 0 in the 5GHz band. | |
| maxItems: 502 | |
| marvell,caldata-txpwrlimit-5g-sub1: | |
| $ref: /schemas/types.yaml#/definitions/uint8-array | |
| description: Calibration data for sub-band 1 in the 5GHz band. | |
| maxItems: 688 | |
| marvell,caldata-txpwrlimit-5g-sub2: | |
| $ref: /schemas/types.yaml#/definitions/uint8-array | |
| description: Calibration data for sub-band 2 in the 5GHz band. | |
| maxItems: 750 | |
| marvell,caldata-txpwrlimit-5g-sub3: | |
| $ref: /schemas/types.yaml#/definitions/uint8-array | |
| description: Calibration data for sub-band 3 in the 5GHz band. | |
| maxItems: 502 | |
| marvell,wakeup-pin: | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| description: | |
| Provides the pin number for the wakeup pin from the device's point of | |
| view. The wakeup pin is used for the device to wake the host system | |
| from sleep. This property is only necessary if the wakeup pin is | |
| wired in a non-standard way, such that the default pin assignments | |
| are invalid. | |
| required: | |
| - compatible | |
| - reg | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| mmc { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| wifi@1 { | |
| compatible = "marvell,sd8897"; | |
| reg = <1>; | |
| interrupt-parent = <&pio>; | |
| interrupts = <38 IRQ_TYPE_LEVEL_LOW>; | |
| marvell,wakeup-pin = <3>; | |
| }; | |
| }; |