| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/net/dsa/qca,ar9331.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Qualcomm Atheros AR9331 built-in switch | |
| maintainers: | |
| - Oleksij Rempel <o.rempel@pengutronix.de> | |
| description: | |
| Qualcomm Atheros AR9331 is a switch built-in to Atheros AR9331 WiSoC and | |
| addressable over internal MDIO bus. All PHYs are built-in as well. | |
| properties: | |
| compatible: | |
| const: qca,ar9331-switch | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| interrupt-controller: true | |
| '#interrupt-cells': | |
| const: 1 | |
| mdio: | |
| $ref: /schemas/net/mdio.yaml# | |
| unevaluatedProperties: false | |
| properties: | |
| interrupt-parent: true | |
| patternProperties: | |
| '(ethernet-)?phy@[0-4]+$': | |
| type: object | |
| unevaluatedProperties: false | |
| properties: | |
| reg: true | |
| interrupts: | |
| maxItems: 1 | |
| resets: | |
| maxItems: 1 | |
| reset-names: | |
| items: | |
| - const: switch | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - interrupt-controller | |
| - '#interrupt-cells' | |
| - mdio | |
| - ports | |
| - resets | |
| - reset-names | |
| allOf: | |
| - $ref: dsa.yaml#/$defs/ethernet-ports | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| mdio { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| switch10: switch@10 { | |
| compatible = "qca,ar9331-switch"; | |
| reg = <0x10>; | |
| interrupt-parent = <&miscintc>; | |
| interrupts = <12>; | |
| interrupt-controller; | |
| #interrupt-cells = <1>; | |
| resets = <&rst 8>; | |
| reset-names = "switch"; | |
| ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| port@0 { | |
| reg = <0x0>; | |
| ethernet = <ð1>; | |
| phy-mode = "gmii"; | |
| fixed-link { | |
| speed = <1000>; | |
| full-duplex; | |
| }; | |
| }; | |
| port@1 { | |
| reg = <0x1>; | |
| phy-handle = <&phy_port0>; | |
| phy-mode = "internal"; | |
| }; | |
| port@2 { | |
| reg = <0x2>; | |
| phy-handle = <&phy_port1>; | |
| phy-mode = "internal"; | |
| }; | |
| port@3 { | |
| reg = <0x3>; | |
| phy-handle = <&phy_port2>; | |
| phy-mode = "internal"; | |
| }; | |
| port@4 { | |
| reg = <0x4>; | |
| phy-handle = <&phy_port3>; | |
| phy-mode = "internal"; | |
| }; | |
| }; | |
| mdio { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| interrupt-parent = <&switch10>; | |
| phy_port0: ethernet-phy@0 { | |
| reg = <0x0>; | |
| interrupts = <0>; | |
| }; | |
| phy_port1: ethernet-phy@1 { | |
| reg = <0x1>; | |
| interrupts = <0>; | |
| }; | |
| phy_port2: ethernet-phy@2 { | |
| reg = <0x2>; | |
| interrupts = <0>; | |
| }; | |
| phy_port3: ethernet-phy@3 { | |
| reg = <0x3>; | |
| interrupts = <0>; | |
| }; | |
| phy_port4: ethernet-phy@4 { | |
| reg = <0x4>; | |
| interrupts = <0>; | |
| }; | |
| }; | |
| }; | |
| }; |