| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/net/dsa/maxlinear,mxl862xx.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: MaxLinear MxL862xx Ethernet Switch Family | |
| maintainers: | |
| - Daniel Golle <daniel@makrotopia.org> | |
| description: | |
| The MaxLinear MxL862xx switch family are multi-port Ethernet switches with | |
| integrated 2.5GE PHYs. The MxL86252 has five PHY ports and the MxL86282 | |
| has eight PHY ports. Both models come with two 10 Gigabit/s SerDes | |
| interfaces to be used to connect external PHYs or SFP cages, or as CPU | |
| port. | |
| allOf: | |
| - $ref: dsa.yaml#/$defs/ethernet-ports | |
| properties: | |
| compatible: | |
| enum: | |
| - maxlinear,mxl86252 | |
| - maxlinear,mxl86282 | |
| reg: | |
| maxItems: 1 | |
| description: MDIO address of the switch | |
| mdio: | |
| $ref: /schemas/net/mdio.yaml# | |
| unevaluatedProperties: false | |
| required: | |
| - compatible | |
| - mdio | |
| - reg | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| mdio { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| switch@0 { | |
| compatible = "maxlinear,mxl86282"; | |
| reg = <0>; | |
| ethernet-ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| /* Microcontroller port */ | |
| port@0 { | |
| reg = <0>; | |
| status = "disabled"; | |
| }; | |
| port@1 { | |
| reg = <1>; | |
| phy-handle = <&phy0>; | |
| phy-mode = "internal"; | |
| }; | |
| port@2 { | |
| reg = <2>; | |
| phy-handle = <&phy1>; | |
| phy-mode = "internal"; | |
| }; | |
| port@3 { | |
| reg = <3>; | |
| phy-handle = <&phy2>; | |
| phy-mode = "internal"; | |
| }; | |
| port@4 { | |
| reg = <4>; | |
| phy-handle = <&phy3>; | |
| phy-mode = "internal"; | |
| }; | |
| port@5 { | |
| reg = <5>; | |
| phy-handle = <&phy4>; | |
| phy-mode = "internal"; | |
| }; | |
| port@6 { | |
| reg = <6>; | |
| phy-handle = <&phy5>; | |
| phy-mode = "internal"; | |
| }; | |
| port@7 { | |
| reg = <7>; | |
| phy-handle = <&phy6>; | |
| phy-mode = "internal"; | |
| }; | |
| port@8 { | |
| reg = <8>; | |
| phy-handle = <&phy7>; | |
| phy-mode = "internal"; | |
| }; | |
| port@9 { | |
| reg = <9>; | |
| ethernet = <&gmac0>; | |
| phy-mode = "usxgmii"; | |
| fixed-link { | |
| speed = <10000>; | |
| full-duplex; | |
| }; | |
| }; | |
| }; | |
| mdio { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| phy0: ethernet-phy@0 { | |
| reg = <0>; | |
| }; | |
| phy1: ethernet-phy@1 { | |
| reg = <1>; | |
| }; | |
| phy2: ethernet-phy@2 { | |
| reg = <2>; | |
| }; | |
| phy3: ethernet-phy@3 { | |
| reg = <3>; | |
| }; | |
| phy4: ethernet-phy@4 { | |
| reg = <4>; | |
| }; | |
| phy5: ethernet-phy@5 { | |
| reg = <5>; | |
| }; | |
| phy6: ethernet-phy@6 { | |
| reg = <6>; | |
| }; | |
| phy7: ethernet-phy@7 { | |
| reg = <7>; | |
| }; | |
| }; | |
| }; | |
| }; |