| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Calxeda Highbank 10Gb XGMAC Ethernet controller | |
| description: | | |
| The Calxeda XGMAC Ethernet controllers are directly connected to the | |
| internal machine "network fabric", which is set up, initialised and | |
| managed by the firmware. So there are no PHY properties in this | |
| binding. Switches in the fabric take care of routing and mapping the | |
| traffic to external network ports. | |
| maintainers: | |
| - Andre Przywara <andre.przywara@arm.com> | |
| properties: | |
| compatible: | |
| const: calxeda,hb-xgmac | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| description: | | |
| Can point to at most 3 xgmac interrupts. The 1st one is the main | |
| interrupt, the 2nd one is used for power management. The optional | |
| 3rd one is the low power state interrupt. | |
| minItems: 2 | |
| maxItems: 3 | |
| dma-coherent: true | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| additionalProperties: false | |
| examples: | |
| - | | |
| ethernet@fff50000 { | |
| compatible = "calxeda,hb-xgmac"; | |
| reg = <0xfff50000 0x1000>; | |
| interrupts = <0 77 4>, <0 78 4>, <0 79 4>; | |
| }; |