| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Broadcom ASP Ethernet controller | |
| maintainers: | |
| - Justin Chen <justin.chen@broadcom.com> | |
| - Florian Fainelli <florian.fainelli@broadcom.com> | |
| description: Broadcom Ethernet controller first introduced with 72165 | |
| properties: | |
| compatible: | |
| oneOf: | |
| - items: | |
| - enum: | |
| - brcm,bcm74110-asp | |
| - const: brcm,asp-v3.0 | |
| - items: | |
| - enum: | |
| - brcm,bcm74165b0-asp | |
| - const: brcm,asp-v2.2 | |
| - items: | |
| - enum: | |
| - brcm,bcm74165-asp | |
| - const: brcm,asp-v2.1 | |
| "#address-cells": | |
| const: 1 | |
| "#size-cells": | |
| const: 1 | |
| reg: | |
| maxItems: 1 | |
| ranges: true | |
| interrupts: | |
| items: | |
| - description: RX/TX interrupt | |
| - description: Wake-on-LAN interrupt | |
| clocks: | |
| maxItems: 1 | |
| ethernet-ports: | |
| type: object | |
| properties: | |
| "#address-cells": | |
| const: 1 | |
| "#size-cells": | |
| const: 0 | |
| patternProperties: | |
| "^port@[0-9a-f]+$": | |
| type: object | |
| $ref: ethernet-controller.yaml# | |
| unevaluatedProperties: false | |
| properties: | |
| reg: | |
| maxItems: 1 | |
| description: Port number | |
| brcm,channel: | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| description: | | |
| ASP Channel Number | |
| The depacketizer channel that consumes packets from | |
| the unimac/port. | |
| required: | |
| - reg | |
| - brcm,channel | |
| additionalProperties: false | |
| patternProperties: | |
| "^mdio@[0-9a-f]+$": | |
| type: object | |
| $ref: brcm,unimac-mdio.yaml | |
| description: | |
| ASP internal UniMAC MDIO bus | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - clocks | |
| - ranges | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| ethernet@9c00000 { | |
| compatible = "brcm,bcm74165-asp", "brcm,asp-v2.1"; | |
| reg = <0x9c00000 0x1fff14>; | |
| interrupts-extended = <&intc GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, | |
| <&aon_pm_l2_intc 14>; | |
| ranges = <0x0 0x9c00000 0x1fff14>; | |
| clocks = <&scmi 14>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| mdio@c614 { | |
| compatible = "brcm,asp-v2.1-mdio"; | |
| reg = <0xc614 0x8>; | |
| reg-names = "mdio"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| phy0: ethernet-phy@1 { | |
| reg = <1>; | |
| }; | |
| }; | |
| mdio@ce14 { | |
| compatible = "brcm,asp-v2.1-mdio"; | |
| reg = <0xce14 0x8>; | |
| reg-names = "mdio"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| phy1: ethernet-phy@1 { | |
| reg = <1>; | |
| }; | |
| }; | |
| ethernet-ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| port@0 { | |
| reg = <0>; | |
| brcm,channel = <8>; | |
| phy-mode = "rgmii"; | |
| phy-handle = <&phy0>; | |
| }; | |
| port@1 { | |
| reg = <1>; | |
| brcm,channel = <9>; | |
| phy-mode = "rgmii"; | |
| phy-handle = <&phy1>; | |
| }; | |
| }; | |
| }; |