| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/net/airoha,an8801.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Airoha AN8801R Series PHY | |
| maintainers: | |
| - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> | |
| description: | |
| The Airoha AN8801R is a low power single-port Ethernet PHY Transceiver | |
| with Single-port serdes interface for 1000Base-X/RGMII; this chip is | |
| compliant with 10Base-T, 100Base-TX and 1000Base-T IEEE 802.3(u,ab) | |
| and supports Energy Efficient Ethernet (802.3az), Full Duplex Control | |
| Flow (802.3x), auto-negotiation, crossover detect and autocorrection, | |
| Wake-on-LAN with Magic Packet, and Jumbo Frame up to 9 Kilobytes. | |
| This PHY also supports up to three user-configurable LEDs, which are | |
| usually used for LAN Activity, 100M, 1000M indication. | |
| allOf: | |
| - $ref: ethernet-phy.yaml# | |
| properties: | |
| compatible: | |
| enum: | |
| - ethernet-phy-idc0ff.0421 | |
| reg: | |
| maxItems: 1 | |
| leds: | |
| type: object | |
| description: | |
| Describes the LEDs associated to the PHY | |
| properties: | |
| "#address-cells": | |
| const: 1 | |
| "#size-cells": | |
| const: 0 | |
| patternProperties: | |
| "^led@[0-2]$": | |
| type: object | |
| description: PHY LEDs | |
| $ref: /schemas/leds/common.yaml# | |
| properties: | |
| reg: | |
| enum: [0, 1, 2] | |
| function-enumerator: | |
| enum: [0, 1, 2] | |
| description: | | |
| Specifies a function for offloading LED functionality to the PHY: | |
| 0 - No offloading | |
| 1 - Link Availability | |
| 2 - Network Activity | |
| required: | |
| - reg | |
| unevaluatedProperties: false | |
| additionalProperties: false | |
| wakeup-source: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| description: | |
| Enable Wake-on-LAN support | |
| required: | |
| - reg | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/leds/common.h> | |
| mdio { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| ethernet-phy@0 { | |
| compatible = "ethernet-phy-idc0ff.0421"; | |
| reg = <0>; | |
| leds { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| led@0 { | |
| reg = <0>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| function = LED_FUNCTION_LAN; | |
| default-state = "keep"; | |
| }; | |
| led@1 { | |
| reg = <1>; | |
| color = <LED_COLOR_ID_GREEN>; | |
| function = LED_FUNCTION_LAN; | |
| function-enumerator = <1>; | |
| default-state = "keep"; | |
| }; | |
| led@2 { | |
| reg = <2>; | |
| color = <LED_COLOR_ID_YELLOW>; | |
| function = LED_FUNCTION_LAN; | |
| function-enumerator = <2>; | |
| default-state = "keep"; | |
| }; | |
| }; | |
| }; | |
| }; |