| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/net/actions,owl-emac.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Actions Semi Owl SoCs Ethernet MAC Controller | |
| maintainers: | |
| - Cristian Ciocaltea <cristian.ciocaltea@gmail.com> | |
| description: | | |
| This Ethernet MAC is used on the Owl family of SoCs from Actions Semi. | |
| It provides the RMII and SMII interfaces and is compliant with the | |
| IEEE 802.3 CSMA/CD standard, supporting both half-duplex and full-duplex | |
| operation modes at 10/100 Mb/s data transfer rates. | |
| allOf: | |
| - $ref: ethernet-controller.yaml# | |
| properties: | |
| compatible: | |
| oneOf: | |
| - const: actions,owl-emac | |
| - items: | |
| - enum: | |
| - actions,s500-emac | |
| - const: actions,owl-emac | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| clocks: | |
| minItems: 2 | |
| maxItems: 2 | |
| clock-names: | |
| additionalItems: false | |
| items: | |
| - const: eth | |
| - const: rmii | |
| resets: | |
| maxItems: 1 | |
| actions,ethcfg: | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| description: | |
| Phandle to the device containing custom config. | |
| mdio: | |
| $ref: mdio.yaml# | |
| unevaluatedProperties: false | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - clocks | |
| - clock-names | |
| - resets | |
| - phy-mode | |
| - phy-handle | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/clock/actions,s500-cmu.h> | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| #include <dt-bindings/reset/actions,s500-reset.h> | |
| ethernet@b0310000 { | |
| compatible = "actions,s500-emac", "actions,owl-emac"; | |
| reg = <0xb0310000 0x10000>; | |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&cmu 59 /*CLK_ETHERNET*/>, <&cmu CLK_RMII_REF>; | |
| clock-names = "eth", "rmii"; | |
| resets = <&cmu RESET_ETHERNET>; | |
| phy-mode = "rmii"; | |
| phy-handle = <ð_phy>; | |
| mdio { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| eth_phy: ethernet-phy@3 { | |
| reg = <0x3>; | |
| interrupt-parent = <&sirq>; | |
| interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
| }; | |
| }; | |
| }; |