| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Fixed partitions | |
| description: | | |
| This binding can be used on platforms which have strong conventions about | |
| which portions of a flash are used for what purposes, but which don't use an | |
| on-flash partition table such as RedBoot. | |
| The partition table should be a node named "partitions". Partitions are then | |
| defined as subnodes. | |
| maintainers: | |
| - Rafał Miłecki <rafal@milecki.pl> | |
| properties: | |
| compatible: | |
| oneOf: | |
| - const: fixed-partitions | |
| - items: | |
| - const: sercomm,sc-partitions | |
| - const: fixed-partitions | |
| "#address-cells": | |
| enum: [ 1, 2 ] | |
| "#size-cells": | |
| enum: [ 1, 2 ] | |
| patternProperties: | |
| "@[0-9a-f]+$": | |
| $ref: partition.yaml#/$defs/partition-node | |
| required: | |
| - "#address-cells" | |
| - "#size-cells" | |
| # fixed-partitions can be nested | |
| allOf: | |
| - $ref: partition.yaml# | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| partitions { | |
| compatible = "fixed-partitions"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| partition@0 { | |
| label = "u-boot"; | |
| reg = <0x0000000 0x100000>; | |
| read-only; | |
| }; | |
| uimage@100000 { | |
| reg = <0x0100000 0x200000>; | |
| compression = "lzma"; | |
| }; | |
| }; | |
| - | | |
| partitions { | |
| compatible = "fixed-partitions"; | |
| #address-cells = <1>; | |
| #size-cells = <2>; | |
| /* a 4 GiB partition */ | |
| partition@0 { | |
| label = "filesystem"; | |
| reg = <0x00000000 0x1 0x00000000>; | |
| linux,rootfs; | |
| }; | |
| }; | |
| - | | |
| partitions { | |
| compatible = "fixed-partitions"; | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| /* an 8 GiB partition */ | |
| partition@0 { | |
| label = "filesystem #1"; | |
| reg = <0x0 0x00000000 0x2 0x00000000>; | |
| }; | |
| /* a 4 GiB partition */ | |
| partition@200000000 { | |
| label = "filesystem #2"; | |
| reg = <0x2 0x00000000 0x1 0x00000000>; | |
| }; | |
| }; | |
| - | | |
| partitions { | |
| compatible = "fixed-partitions"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| partition@0 { | |
| label = "bootloader"; | |
| reg = <0x000000 0x100000>; | |
| read-only; | |
| }; | |
| firmware@100000 { | |
| compatible = "brcm,trx"; | |
| label = "firmware"; | |
| reg = <0x100000 0xe00000>; | |
| }; | |
| calibration@f00000 { | |
| compatible = "fixed-partitions"; | |
| label = "calibration"; | |
| reg = <0xf00000 0x100000>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| partition@0 { | |
| label = "wifi0"; | |
| reg = <0x000000 0x080000>; | |
| }; | |
| partition@80000 { | |
| label = "wifi1"; | |
| reg = <0x080000 0x080000>; | |
| }; | |
| }; | |
| }; | |
| - | | |
| partitions { | |
| compatible = "sercomm,sc-partitions", "fixed-partitions"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| partition@0 { | |
| label = "u-boot"; | |
| reg = <0x0 0x100000>; | |
| sercomm,scpart-id = <0>; | |
| read-only; | |
| }; | |
| partition@100000 { | |
| label = "dynamic partition map"; | |
| reg = <0x100000 0x100000>; | |
| sercomm,scpart-id = <1>; | |
| }; | |
| partition@200000 { | |
| label = "Factory"; | |
| reg = <0x200000 0x100000>; | |
| sercomm,scpart-id = <2>; | |
| read-only; | |
| }; | |
| }; |