| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/mmc/fsl,esdhc.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Freescale Enhanced Secure Digital Host Controller (eSDHC) | |
| description: | |
| The Enhanced Secure Digital Host Controller provides an interface | |
| for MMC, SD, and SDIO types of memory cards. | |
| maintainers: | |
| - Frank Li <Frank.Li@nxp.com> | |
| properties: | |
| compatible: | |
| items: | |
| - enum: | |
| - fsl,mpc8536-esdhc | |
| - fsl,mpc8378-esdhc | |
| - fsl,p2020-esdhc | |
| - fsl,p4080-esdhc | |
| - fsl,t1040-esdhc | |
| - fsl,t4240-esdhc | |
| - fsl,ls1012a-esdhc | |
| - fsl,ls1021a-esdhc | |
| - fsl,ls1028a-esdhc | |
| - fsl,ls1088a-esdhc | |
| - fsl,ls1043a-esdhc | |
| - fsl,ls1046a-esdhc | |
| - fsl,ls2080a-esdhc | |
| - const: fsl,esdhc | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| clocks: | |
| maxItems: 1 | |
| clock-frequency: | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| description: specifies eSDHC base clock frequency. | |
| sdhci,wp-inverted: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| deprecated: true | |
| description: | |
| specifies that eSDHC controller reports | |
| inverted write-protect state; New devices should use the generic | |
| "wp-inverted" property. | |
| sdhci,1-bit-only: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| deprecated: true | |
| description: | |
| specifies that a controller can only handle | |
| 1-bit data transfers. New devices should use the generic | |
| "bus-width = <1>" property. | |
| sdhci,auto-cmd12: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| description: | |
| specifies that a controller can only handle auto CMD12. | |
| voltage-ranges: | |
| $ref: /schemas/types.yaml#/definitions/uint32-matrix | |
| items: | |
| items: | |
| - description: specifies minimum slot voltage (mV). | |
| - description: specifies maximum slot voltage (mV). | |
| minItems: 1 | |
| maxItems: 8 | |
| dma-coherent: true | |
| little-endian: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| description: | |
| If the host controller is little-endian mode, specify | |
| this property. The default endian mode is big-endian. | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| allOf: | |
| - $ref: sdhci-common.yaml# | |
| - $ref: mmc-controller-common.yaml# | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| mmc@2e000 { | |
| compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; | |
| reg = <0x2e000 0x1000>; | |
| interrupts = <42 0x8>; | |
| interrupt-parent = <&ipic>; | |
| /* Filled in by U-Boot */ | |
| clock-frequency = <100000000>; | |
| voltage-ranges = <3300 3300>; | |
| }; |