| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/i2c/sony,imx111.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Sony IMX111 8MP CMOS Digital Image Sensor |
| |
| maintainers: |
| - Svyatoslav Ryhel <clamor95@gmail.com> |
| |
| description: |
| IMX111 sensor is a Sony CMOS active pixel digital image sensor with an active |
| array size of 2464H x 3280V. It is programmable through I2C interface. Image |
| data is sent through MIPI CSI-2, through 1 or 2 lanes. |
| |
| allOf: |
| - $ref: /schemas/media/video-interface-devices.yaml# |
| - $ref: /schemas/nvmem/nvmem-consumer.yaml# |
| |
| properties: |
| compatible: |
| const: sony,imx111 |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| description: EXTCLK with possible frequency from 6 to 54 MHz |
| maxItems: 1 |
| |
| reset-gpios: |
| maxItems: 1 |
| |
| iovdd-supply: |
| description: Digital IO power supply (1.8V) |
| |
| dvdd-supply: |
| description: Digital power supply (1.2V) |
| |
| avdd-supply: |
| description: Analog power supply (2.7V) |
| |
| port: |
| additionalProperties: false |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| |
| properties: |
| endpoint: |
| $ref: /schemas/media/video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| required: |
| - data-lanes |
| - link-frequencies |
| |
| required: |
| - endpoint |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - port |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/media/video-interfaces.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| camera@10 { |
| compatible = "sony,imx111"; |
| reg = <0x10>; |
| |
| clocks = <&imx111_clk>; |
| |
| iovdd-supply = <&camera_vddio_1v8>; |
| dvdd-supply = <&camera_vddd_1v2>; |
| avdd-supply = <&camera_vdda_2v7>; |
| |
| orientation = <1>; |
| rotation = <90>; |
| |
| nvmem = <&eeprom>; |
| flash-leds = <&led>; |
| lens-focus = <&vcm>; |
| |
| reset-gpios = <&gpio 84 GPIO_ACTIVE_LOW>; |
| |
| port { |
| imx111_output: endpoint { |
| data-lanes = <1 2>; |
| link-frequencies = /bits/ 64 <542400000>; |
| remote-endpoint = <&csi_input>; |
| }; |
| }; |
| }; |
| }; |
| ... |
