| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/leds/ti,tps61310.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Texas Instruments TPS6131X flash LED driver |
| |
| maintainers: |
| - Matthias Fend <matthias.fend@emfend.at> |
| |
| description: | |
| The TPS61310/TPS61311 is a flash LED driver with I2C interface. |
| Its power stage is capable of supplying a maximum total current of roughly 1500mA. |
| The TPS6131x provides three constant-current sinks, capable of sinking |
| up to 2 x 400mA (LED1 and LED3) and 800mA (LED2) in flash mode. |
| In torch mode, each sink (LED1, LED2, LED3) supports currents up to 175mA. |
| Since the three current sinks share most of the control components such as |
| flash timer, control logic, safety timer and the operating mode, they cannot |
| be used completely independently of each other. Therefore, only one LED is |
| supported, but the current sinks can be combined accordingly. |
| |
| The data sheet can be found at: |
| https://www.ti.com/lit/ds/symlink/tps61310.pdf |
| |
| properties: |
| compatible: |
| oneOf: |
| - items: |
| - enum: |
| - ti,tps61311 |
| - const: ti,tps61310 |
| - items: |
| - const: ti,tps61310 |
| |
| reg: |
| maxItems: 1 |
| |
| reset-gpios: |
| maxItems: 1 |
| description: GPIO connected to NRESET pin |
| |
| ti,valley-current-limit: |
| type: boolean |
| description: |
| Reduce the valley peak current limit from 1750mA to 1250mA (TPS61310) or |
| from 2480mA to 1800mA (TPS61311). |
| |
| led: |
| type: object |
| $ref: common.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| led-sources: |
| minItems: 1 |
| maxItems: 3 |
| items: |
| enum: [1, 2, 3] |
| |
| led-max-microamp: |
| oneOf: |
| - minimum: 50000 |
| maximum: 350000 |
| multipleOf: 50000 |
| - minimum: 25000 |
| maximum: 525000 |
| multipleOf: 25000 |
| |
| flash-max-microamp: |
| oneOf: |
| - minimum: 50000 |
| maximum: 800000 |
| multipleOf: 50000 |
| - minimum: 25000 |
| maximum: 1500000 |
| multipleOf: 25000 |
| |
| flash-max-timeout-us: |
| enum: [ 5300, 10700, 16000, 21300, 26600, 32000, 37300, 68200, 71500, |
| 102200, 136300, 170400, 204500, 340800, 579300, 852000 ] |
| |
| required: |
| - led-sources |
| - led-max-microamp |
| - flash-max-microamp |
| - flash-max-timeout-us |
| |
| required: |
| - compatible |
| - reg |
| - led |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led-controller@33 { |
| compatible = "ti,tps61311", "ti,tps61310"; |
| reg = <0x33>; |
| |
| reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; |
| |
| led { |
| function = LED_FUNCTION_FLASH; |
| color = <LED_COLOR_ID_WHITE>; |
| led-sources = <1>, <2>, <3>; |
| led-max-microamp = <525000>; |
| flash-max-microamp = <1500000>; |
| flash-max-timeout-us = <852000>; |
| }; |
| }; |
| }; |