| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/display/verisilicon,dc.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Verisilicon DC-series display controllers | |
| maintainers: | |
| - Icenowy Zheng <uwu@icenowy.me> | |
| properties: | |
| $nodename: | |
| pattern: "^display@[0-9a-f]+$" | |
| compatible: | |
| items: | |
| - enum: | |
| - thead,th1520-dc8200 | |
| - const: verisilicon,dc # DC IPs have discoverable ID/revision registers | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| clocks: | |
| items: | |
| - description: DC Core clock | |
| - description: DMA AXI bus clock | |
| - description: Configuration AHB bus clock | |
| - description: Pixel clock of output 0 | |
| - description: Pixel clock of output 1 | |
| clock-names: | |
| items: | |
| - const: core | |
| - const: axi | |
| - const: ahb | |
| - const: pix0 | |
| - const: pix1 | |
| resets: | |
| items: | |
| - description: DC Core reset | |
| - description: DMA AXI bus reset | |
| - description: Configuration AHB bus reset | |
| reset-names: | |
| items: | |
| - const: core | |
| - const: axi | |
| - const: ahb | |
| ports: | |
| $ref: /schemas/graph.yaml#/properties/ports | |
| properties: | |
| port@0: | |
| $ref: /schemas/graph.yaml#/properties/port | |
| description: The first output channel , endpoint 0 should be | |
| used for DPI format output and endpoint 1 should be used | |
| for DP format output. | |
| port@1: | |
| $ref: /schemas/graph.yaml#/properties/port | |
| description: The second output channel if the DC variant | |
| supports. Follow the same endpoint addressing rule with | |
| the first port. | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - clocks | |
| - clock-names | |
| - resets | |
| - reset-names | |
| - ports | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| #include <dt-bindings/clock/thead,th1520-clk-ap.h> | |
| #include <dt-bindings/reset/thead,th1520-reset.h> | |
| soc { | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| display@ffef600000 { | |
| compatible = "thead,th1520-dc8200", "verisilicon,dc"; | |
| reg = <0xff 0xef600000 0x0 0x100000>; | |
| interrupts = <93 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&clk_vo CLK_DPU_CCLK>, | |
| <&clk_vo CLK_DPU_ACLK>, | |
| <&clk_vo CLK_DPU_HCLK>, | |
| <&clk_vo CLK_DPU_PIXELCLK0>, | |
| <&clk_vo CLK_DPU_PIXELCLK1>; | |
| clock-names = "core", "axi", "ahb", "pix0", "pix1"; | |
| resets = <&rst TH1520_RESET_ID_DPU_CORE>, | |
| <&rst TH1520_RESET_ID_DPU_AXI>, | |
| <&rst TH1520_RESET_ID_DPU_AHB>; | |
| reset-names = "core", "axi", "ahb"; | |
| ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| port@1 { | |
| reg = <1>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| dpu_out_dp1: endpoint@1 { | |
| reg = <1>; | |
| remote-endpoint = <&hdmi_in>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; |