| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/panel/sharp,lq079l1sx01.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Sharp Microelectronics 7.9" WQXGA TFT LCD panel |
| |
| maintainers: |
| - Svyatoslav Ryhel <clamor95@gmail.com> |
| |
| description: > |
| This panel requires a dual-channel DSI host to operate and it supports |
| only left-right split mode, where each channel drives the left or right |
| half of the screen and only video mode. |
| |
| Each of the DSI channels controls a separate DSI peripheral. |
| The peripheral driven by the first link (DSI-LINK1), left one, is |
| considered the primary peripheral and controls the device. |
| |
| allOf: |
| - $ref: panel-common-dual.yaml# |
| |
| properties: |
| compatible: |
| const: sharp,lq079l1sx01 |
| |
| reg: |
| maxItems: 1 |
| |
| avdd-supply: |
| description: regulator that supplies the analog voltage |
| |
| vddio-supply: |
| description: regulator that supplies the I/O voltage |
| |
| vsp-supply: |
| description: positive boost supply regulator |
| |
| vsn-supply: |
| description: negative boost supply regulator |
| |
| reset-gpios: |
| maxItems: 1 |
| |
| backlight: true |
| ports: true |
| |
| required: |
| - compatible |
| - reg |
| - avdd-supply |
| - vddio-supply |
| - ports |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| dsi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| panel@0 { |
| compatible = "sharp,lq079l1sx01"; |
| reg = <0>; |
| |
| reset-gpios = <&gpio 59 GPIO_ACTIVE_LOW>; |
| |
| avdd-supply = <&avdd_lcd>; |
| vddio-supply = <&vdd_lcd_io>; |
| vsp-supply = <&vsp_5v5_lcd>; |
| vsn-supply = <&vsn_5v5_lcd>; |
| |
| backlight = <&backlight>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| panel_in0: endpoint { |
| remote-endpoint = <&dsi0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| panel_in1: endpoint { |
| remote-endpoint = <&dsi1_out>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| ... |
