| What: /sys/class/accel/accel<n>/device/armcp_kernel_ver | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the Linux kernel running on the device's CPU. | |
| Will be DEPRECATED in Linux kernel version 5.10, and be | |
| replaced with cpucp_kernel_ver | |
| What: /sys/class/accel/accel<n>/device/armcp_ver | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the application running on the device's CPU | |
| Will be DEPRECATED in Linux kernel version 5.10, and be | |
| replaced with cpucp_ver | |
| What: /sys/class/accel/accel<n>/device/clk_max_freq_mhz | |
| Date: Jun 2019 | |
| KernelVersion: 5.7 | |
| Contact: ogabbay@kernel.org | |
| Description: Allows the user to set the maximum clock frequency, in MHz. | |
| The device clock might be set to lower value than the maximum. | |
| The user should read the clk_cur_freq_mhz to see the actual | |
| frequency value of the device clock. This property is valid | |
| only for the Gaudi ASIC family | |
| What: /sys/class/accel/accel<n>/device/clk_cur_freq_mhz | |
| Date: Jun 2019 | |
| KernelVersion: 5.7 | |
| Contact: ogabbay@kernel.org | |
| Description: Displays the current frequency, in MHz, of the device clock. | |
| This property is valid only for the Gaudi ASIC family | |
| What: /sys/class/accel/accel<n>/device/cpld_ver | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the Device's CPLD F/W | |
| What: /sys/class/accel/accel<n>/device/cpucp_kernel_ver | |
| Date: Oct 2020 | |
| KernelVersion: 5.10 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the Linux kernel running on the device's CPU | |
| What: /sys/class/accel/accel<n>/device/cpucp_ver | |
| Date: Oct 2020 | |
| KernelVersion: 5.10 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the application running on the device's CPU | |
| What: /sys/class/accel/accel<n>/device/device_type | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Displays the code name of the device according to its type. | |
| The supported values are: "GOYA" | |
| What: /sys/class/accel/accel<n>/device/eeprom | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: A binary file attribute that contains the contents of the | |
| on-board EEPROM | |
| What: /sys/class/accel/accel<n>/device/fuse_ver | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Displays the device's version from the eFuse | |
| What: /sys/class/accel/accel<n>/device/fw_os_ver | |
| Date: Dec 2021 | |
| KernelVersion: 5.18 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the firmware OS running on the device's CPU | |
| What: /sys/class/accel/accel<n>/device/hard_reset | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Interface to trigger a hard-reset operation for the device. | |
| Hard-reset will reset ALL internal components of the device | |
| except for the PCI interface and the internal PLLs | |
| What: /sys/class/accel/accel<n>/device/hard_reset_cnt | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Displays how many times the device have undergone a hard-reset | |
| operation since the driver was loaded | |
| What: /sys/class/accel/accel<n>/device/high_pll | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Allows the user to set the maximum clock frequency for MME, TPC | |
| and IC when the power management profile is set to "automatic". | |
| This property is valid only for the Goya ASIC family | |
| What: /sys/class/accel/accel<n>/device/ic_clk | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Allows the user to set the maximum clock frequency, in Hz, of | |
| the Interconnect fabric. Writes to this parameter affect the | |
| device only when the power management profile is set to "manual" | |
| mode. The device IC clock might be set to lower value than the | |
| maximum. The user should read the ic_clk_curr to see the actual | |
| frequency value of the IC. This property is valid only for the | |
| Goya ASIC family | |
| What: /sys/class/accel/accel<n>/device/ic_clk_curr | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Displays the current clock frequency, in Hz, of the Interconnect | |
| fabric. This property is valid only for the Goya ASIC family | |
| What: /sys/class/accel/accel<n>/device/infineon_ver | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the Device's power supply F/W code. Relevant only to GOYA and GAUDI | |
| What: /sys/class/accel/accel<n>/device/max_power | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Allows the user to set the maximum power consumption of the | |
| device in milliwatts. | |
| What: /sys/class/accel/accel<n>/device/mme_clk | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Allows the user to set the maximum clock frequency, in Hz, of | |
| the MME compute engine. Writes to this parameter affect the | |
| device only when the power management profile is set to "manual" | |
| mode. The device MME clock might be set to lower value than the | |
| maximum. The user should read the mme_clk_curr to see the actual | |
| frequency value of the MME. This property is valid only for the | |
| Goya ASIC family | |
| What: /sys/class/accel/accel<n>/device/mme_clk_curr | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Displays the current clock frequency, in Hz, of the MME compute | |
| engine. This property is valid only for the Goya ASIC family | |
| What: /sys/class/accel/accel<n>/device/module_id | |
| Date: Nov 2023 | |
| KernelVersion: not yet upstreamed | |
| Contact: ogabbay@kernel.org | |
| Description: Displays the device's module id | |
| What: /sys/class/accel/accel<n>/device/parent_device | |
| Date: Nov 2023 | |
| KernelVersion: 6.8 | |
| Contact: ttayar@habana.ai | |
| Description: Displays the name of the parent device of the accel device | |
| What: /sys/class/accel/accel<n>/device/pci_addr | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Displays the PCI address of the device. This is needed so the | |
| user would be able to open a device based on its PCI address | |
| What: /sys/class/accel/accel<n>/device/pm_mng_profile | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Power management profile. Values are "auto", "manual". In "auto" | |
| mode, the driver will set the maximum clock frequency to a high | |
| value when a user-space process opens the device's file (unless | |
| it was already opened by another process). The driver will set | |
| the max clock frequency to a low value when there are no user | |
| processes that are opened on the device's file. In "manual" | |
| mode, the user sets the maximum clock frequency by writing to | |
| ic_clk, mme_clk and tpc_clk. This property is valid only for | |
| the Goya ASIC family | |
| What: /sys/class/accel/accel<n>/device/preboot_btl_ver | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the device's preboot F/W code | |
| What: /sys/class/accel/accel<n>/device/security_enabled | |
| Date: Oct 2022 | |
| KernelVersion: 6.1 | |
| Contact: obitton@habana.ai | |
| Description: Displays the device's security status | |
| What: /sys/class/accel/accel<n>/device/soft_reset | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Interface to trigger a soft-reset operation for the device. | |
| Soft-reset will reset only the compute and DMA engines of the | |
| device | |
| What: /sys/class/accel/accel<n>/device/soft_reset_cnt | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Displays how many times the device have undergone a soft-reset | |
| operation since the driver was loaded | |
| What: /sys/class/accel/accel<n>/device/status | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Status of the card: | |
| * "operational" - Device is available for work. | |
| * "in reset" - Device is going through reset, will be | |
| available shortly. | |
| * "disabled" - Device is not usable. | |
| * "needs reset" - Device is not usable until a hard reset | |
| is initiated. | |
| * "in device creation" - Device is not available yet, as it | |
| is still initializing. | |
| * "in reset after device release" - Device is going through | |
| a compute-reset which is executed after a device release | |
| (relevant for Gaudi2 only). | |
| What: /sys/class/accel/accel<n>/device/thermal_ver | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the Device's thermal daemon | |
| What: /sys/class/accel/accel<n>/device/tpc_clk | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Allows the user to set the maximum clock frequency, in Hz, of | |
| the TPC compute engines. Writes to this parameter affect the | |
| device only when the power management profile is set to "manual" | |
| mode. The device TPC clock might be set to lower value than the | |
| maximum. The user should read the tpc_clk_curr to see the actual | |
| frequency value of the TPC. This property is valid only for | |
| Goya ASIC family | |
| What: /sys/class/accel/accel<n>/device/tpc_clk_curr | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Displays the current clock frequency, in Hz, of the TPC compute | |
| engines. This property is valid only for the Goya ASIC family | |
| What: /sys/class/accel/accel<n>/device/uboot_ver | |
| Date: Jan 2019 | |
| KernelVersion: 5.1 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the u-boot running on the device's CPU | |
| What: /sys/class/accel/accel<n>/device/vrm_ver | |
| Date: Jan 2022 | |
| KernelVersion: 5.17 | |
| Contact: ogabbay@kernel.org | |
| Description: Version of the Device's Voltage Regulator Monitor F/W code. N/A to GOYA and GAUDI |