| What: /sys/bus/iio/devices/iio:deviceX/out_currentY_toggle_en | |
| KernelVersion: 5.18 | |
| Contact: linux-iio@vger.kernel.org | |
| Description: | |
| Toggle enable. Write 1 to enable toggle or 0 to disable it. This | |
| is useful when one wants to change the DAC output codes. For | |
| autonomous toggling, the way it should be done is: | |
| - disable toggle operation; | |
| - change out_currentY_rawN, where N is the integer value of the symbol; | |
| - enable toggle operation. | |
| What: /sys/bus/iio/devices/iio:deviceX/out_currentY_rawN | |
| KernelVersion: 5.18 | |
| Contact: linux-iio@vger.kernel.org | |
| Description: | |
| This attribute has the same meaning as out_currentY_raw. It is | |
| specific to toggle enabled channels and refers to the DAC output | |
| code in INPUT_N (_rawN), where N is the integer value of the symbol. | |
| The same scale and offset as in out_currentY_raw applies. | |
| What: /sys/bus/iio/devices/iio:deviceX/out_currentY_symbol | |
| KernelVersion: 5.18 | |
| Contact: linux-iio@vger.kernel.org | |
| Description: | |
| Performs a SW switch to a predefined output symbol. This attribute | |
| is specific to toggle enabled channels and allows switching between | |
| multiple predefined symbols. Each symbol corresponds to a different | |
| output, denoted as out_currentY_rawN, where N is the integer value | |
| of the symbol. Writing an integer value N will select out_currentY_rawN. | |
| What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en | |
| KernelVersion: 5.18 | |
| Contact: linux-iio@vger.kernel.org | |
| Description: | |
| Toggle enable. Write 1 to enable toggle or 0 to disable it. This | |
| is useful when one wants to change the DAC output codes. For | |
| autonomous toggling, the way it should be done is: | |
| - disable toggle operation; | |
| - change out_voltageY_rawN, where N is the integer value of the symbol; | |
| - enable toggle operation. | |
| What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_rawN | |
| KernelVersion: 5.18 | |
| Contact: linux-iio@vger.kernel.org | |
| Description: | |
| This attribute has the same meaning as out_currentY_raw. It is | |
| specific to toggle enabled channels and refers to the DAC output | |
| code in INPUT_N (_rawN), where N is the integer value of the symbol. | |
| The same scale and offset as in out_currentY_raw applies. | |
| What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol | |
| KernelVersion: 5.18 | |
| Contact: linux-iio@vger.kernel.org | |
| Description: | |
| Performs a SW switch to a predefined output symbol. This attribute | |
| is specific to toggle enabled channels and allows switching between | |
| multiple predefined symbols. Each symbol corresponds to a different | |
| output, denoted as out_voltageY_rawN, where N is the integer value | |
| of the symbol. Writing an integer value N will select out_voltageY_rawN. |