| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| Mantis PCI bridge driver | |
| Copyright (C) Manu Abraham (abraham.manu@gmail.com) | |
| */ | |
| #include <linux/signal.h> | |
| #include <linux/slab.h> | |
| #include <linux/sched.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/io.h> | |
| #include <media/dmxdev.h> | |
| #include <media/dvbdev.h> | |
| #include <media/dvb_demux.h> | |
| #include <media/dvb_frontend.h> | |
| #include <media/dvb_net.h> | |
| #include "mantis_common.h" | |
| #include "mantis_link.h" | |
| #include "mantis_hif.h" | |
| #include "mantis_reg.h" | |
| #include "mantis_ca.h" | |
| static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr) | |
| { | |
| struct mantis_ca *ca = en50221->data; | |
| struct mantis_pci *mantis = ca->ca_priv; | |
| dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot); | |
| if (slot != 0) | |
| return -EINVAL; | |
| return mantis_hif_read_mem(ca, addr); | |
| } | |
| static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data) | |
| { | |
| struct mantis_ca *ca = en50221->data; | |
| struct mantis_pci *mantis = ca->ca_priv; | |
| dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot); | |
| if (slot != 0) | |
| return -EINVAL; | |
| return mantis_hif_write_mem(ca, addr, data); | |
| } | |
| static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) | |
| { | |
| struct mantis_ca *ca = en50221->data; | |
| struct mantis_pci *mantis = ca->ca_priv; | |
| dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot); | |
| if (slot != 0) | |
| return -EINVAL; | |
| return mantis_hif_read_iom(ca, addr); | |
| } | |
| static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data) | |
| { | |
| struct mantis_ca *ca = en50221->data; | |
| struct mantis_pci *mantis = ca->ca_priv; | |
| dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot); | |
| if (slot != 0) | |
| return -EINVAL; | |
| return mantis_hif_write_iom(ca, addr, data); | |
| } | |
| static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot) | |
| { | |
| struct mantis_ca *ca = en50221->data; | |
| struct mantis_pci *mantis = ca->ca_priv; | |
| dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot); | |
| udelay(500); /* Wait.. */ | |
| mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */ | |
| udelay(500); | |
| mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */ | |
| msleep(1000); | |
| dvb_ca_en50221_camready_irq(&ca->en50221, 0); | |
| return 0; | |
| } | |
| static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) | |
| { | |
| struct mantis_ca *ca = en50221->data; | |
| struct mantis_pci *mantis = ca->ca_priv; | |
| dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot); | |
| return 0; | |
| } | |
| static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) | |
| { | |
| struct mantis_ca *ca = en50221->data; | |
| struct mantis_pci *mantis = ca->ca_priv; | |
| dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); | |
| return 0; | |
| } | |
| static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) | |
| { | |
| struct mantis_ca *ca = en50221->data; | |
| struct mantis_pci *mantis = ca->ca_priv; | |
| dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot); | |
| if (ca->slot_state == MODULE_INSERTED) { | |
| dprintk(MANTIS_DEBUG, 1, "CA Module present and ready"); | |
| return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; | |
| } else { | |
| dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready"); | |
| } | |
| return 0; | |
| } | |
| int mantis_ca_init(struct mantis_pci *mantis) | |
| { | |
| struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter; | |
| struct mantis_ca *ca; | |
| int ca_flags = 0, result; | |
| dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA"); | |
| ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL); | |
| if (!ca) { | |
| dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting .."); | |
| result = -ENOMEM; | |
| goto err; | |
| } | |
| ca->ca_priv = mantis; | |
| mantis->mantis_ca = ca; | |
| ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE; | |
| /* register CA interface */ | |
| ca->en50221.owner = THIS_MODULE; | |
| ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem; | |
| ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem; | |
| ca->en50221.read_cam_control = mantis_ca_read_cam_ctl; | |
| ca->en50221.write_cam_control = mantis_ca_write_cam_ctl; | |
| ca->en50221.slot_reset = mantis_ca_slot_reset; | |
| ca->en50221.slot_shutdown = mantis_ca_slot_shutdown; | |
| ca->en50221.slot_ts_enable = mantis_ts_control; | |
| ca->en50221.poll_slot_status = mantis_slot_status; | |
| ca->en50221.data = ca; | |
| mutex_init(&ca->ca_lock); | |
| init_waitqueue_head(&ca->hif_data_wq); | |
| init_waitqueue_head(&ca->hif_opdone_wq); | |
| init_waitqueue_head(&ca->hif_write_wq); | |
| dprintk(MANTIS_ERROR, 1, "Registering EN50221 device"); | |
| result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1); | |
| if (result != 0) { | |
| dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result); | |
| goto err; | |
| } | |
| dprintk(MANTIS_ERROR, 1, "Registered EN50221 device"); | |
| mantis_evmgr_init(ca); | |
| return 0; | |
| err: | |
| kfree(ca); | |
| return result; | |
| } | |
| EXPORT_SYMBOL_GPL(mantis_ca_init); | |
| void mantis_ca_exit(struct mantis_pci *mantis) | |
| { | |
| struct mantis_ca *ca = mantis->mantis_ca; | |
| dprintk(MANTIS_DEBUG, 1, "Mantis CA exit"); | |
| if (!ca) | |
| return; | |
| mantis_evmgr_exit(ca); | |
| dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device"); | |
| dvb_ca_en50221_release(&ca->en50221); | |
| kfree(ca); | |
| } | |
| EXPORT_SYMBOL_GPL(mantis_ca_exit); |