| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2024, Eugene Lepshy <fekz115@gmail.com> |
| * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/arm/qcom,ids.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> |
| #include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h> |
| #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include <dt-bindings/sound/qcom,q6afe.h> |
| #include <dt-bindings/sound/qcom,q6asm.h> |
| |
| #include "sm7325.dtsi" |
| #include "pm7325.dtsi" |
| #include "pm8350b.dtsi" /* PM7325B */ |
| #include "pm8350c.dtsi" /* PM7350C */ |
| #include "pmk8350.dtsi" /* PMK7325 */ |
| |
| /delete-node/ &rmtfs_mem; |
| |
| / { |
| model = "Nothing Phone (1)"; |
| compatible = "nothing,spacewar", "qcom,sm7325"; |
| chassis-type = "handset"; |
| |
| aliases { |
| bluetooth0 = &bluetooth; |
| serial0 = &uart5; |
| serial1 = &uart7; |
| wifi0 = &wifi; |
| }; |
| |
| chosen { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| stdout-path = "serial0:115200n8"; |
| |
| framebuffer0: framebuffer@e1000000 { |
| compatible = "simple-framebuffer"; |
| reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>; |
| width = <1080>; |
| height = <2400>; |
| stride = <(1080 * 4)>; |
| format = "a8r8g8b8"; |
| |
| clocks = <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>, |
| <&dispcc DISP_CC_MDSS_BYTE0_CLK>, |
| <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_PCLK0_CLK>, |
| <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| pinctrl-0 = <&kypd_volp_n>; |
| pinctrl-names = "default"; |
| |
| key-volume-up { |
| label = "Volume up"; |
| gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| }; |
| |
| pmic-glink { |
| compatible = "qcom,sm7325-pmic-glink", |
| "qcom,qcm6490-pmic-glink", |
| "qcom,pmic-glink"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>; |
| |
| connector@0 { |
| compatible = "usb-c-connector"; |
| reg = <0>; |
| power-role = "dual"; |
| data-role = "dual"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| pmic_glink_hs_in: endpoint { |
| remote-endpoint = <&usb_1_dwc3_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| pmic_glink_sbu: endpoint { |
| remote-endpoint = <&fsa4480_sbu_mux>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| ramoops_mem: ramoops@83a00000 { |
| compatible = "ramoops"; |
| reg = <0x0 0x83a00000 0x0 0x400000>; |
| pmsg-size = <0x200000>; |
| mem-type = <2>; |
| console-size = <0x200000>; |
| }; |
| |
| cdsp_mem: cdsp@88f00000 { |
| reg = <0x0 0x88f00000 0x0 0x1e00000>; |
| no-map; |
| }; |
| |
| removed_mem: removed@c0000000 { |
| reg = <0x0 0xc0000000 0x0 0x5100000>; |
| no-map; |
| }; |
| |
| cont_splash_mem: cont-splash@e1000000 { |
| reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>; |
| no-map; |
| }; |
| |
| rmtfs_mem: rmtfs@f8500000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0x0 0xf8500000 0x0 0x600000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, |
| <QCOM_SCM_VMID_NAV>; |
| }; |
| }; |
| |
| thermal-zones { |
| camera-thermal { |
| polling-delay-passive = <0>; |
| thermal-sensors = <&pmk8350_adc_tm 2>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| chg-skin-thermal { |
| polling-delay-passive = <0>; |
| thermal-sensors = <&pmk8350_adc_tm 6>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| conn-thermal { |
| polling-delay-passive = <0>; |
| thermal-sensors = <&pmk8350_adc_tm 5>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| quiet-thermal { |
| polling-delay-passive = <0>; |
| thermal-sensors = <&pmk8350_adc_tm 1>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| rear-cam-thermal { |
| polling-delay-passive = <0>; |
| thermal-sensors = <&pmk8350_adc_tm 4>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| sdm-skin-thermal { |
| polling-delay-passive = <0>; |
| thermal-sensors = <&pmk8350_adc_tm 3>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| xo-thermal { |
| polling-delay-passive = <0>; |
| thermal-sensors = <&pmk8350_adc_tm 0>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| }; |
| |
| vph_pwr: vph-pwr-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-min-microvolt = <3700000>; |
| regulator-max-microvolt = <3700000>; |
| }; |
| |
| vreg_cam_vio_1p8: regulator-cam-vio { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_cam_vio_1p8"; |
| |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| /* Always-on prevents CCI bus timeouts */ |
| regulator-always-on; |
| |
| vin-supply = <&vreg_bob>; |
| }; |
| |
| vreg_camf_vana_2p8: regulator-camf-vana { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_camf_vana_2p8"; |
| |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| |
| gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| vin-supply = <&vreg_bob>; |
| }; |
| |
| vreg_camf_vdig_1p1: regulator-camf-vdig { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_camf_vdig_1p1"; |
| |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| |
| gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| vin-supply = <&vreg_s8b_1p256>; |
| }; |
| |
| vreg_camu_vaf_1p8: regulator-camu-vaf { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_camu_vaf_1p8"; |
| |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| gpio = <&tlmm 71 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| vin-supply = <&vreg_bob>; |
| }; |
| |
| vreg_camu_vana_2p8: regulator-camu-vana { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_camu_vana_2p8"; |
| |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| vin-supply = <&vreg_bob>; |
| }; |
| |
| vreg_camu_vdig_1p1: regulator-camu-vdig { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_camu_vdig_1p1"; |
| |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| |
| gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| vin-supply = <&vreg_s8b_1p256>; |
| }; |
| |
| vreg_camw_vaf_1p8: regulator-camw-vaf { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_camw_vaf_1p8"; |
| |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| gpio = <&tlmm 96 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| vin-supply = <&vreg_bob>; |
| }; |
| |
| vreg_camw_vana_2p8: regulator-camw-vana { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_camw_vana_2p8"; |
| |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| |
| gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| vin-supply = <&vreg_bob>; |
| }; |
| |
| vreg_camw_vdig_1p1: regulator-camw-vdig { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_camw_vdig_1p1"; |
| |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| |
| gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| vin-supply = <&vreg_s8b_1p256>; |
| }; |
| |
| // S2B is really ebi.lvl but it's there for supply map completeness sake. |
| vreg_s2b_0p7: smpa3-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_s2b_0p7"; |
| |
| regulator-min-microvolt = <65535>; |
| regulator-max-microvolt = <65535>; |
| regulator-always-on; |
| vin-supply = <&vph_pwr>; |
| }; |
| }; |
| |
| &apps_rsc { |
| regulators-0 { |
| compatible = "qcom,pm7325-rpmh-regulators"; |
| qcom,pmic-id = "b"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s7-supply = <&vph_pwr>; |
| vdd-s8-supply = <&vph_pwr>; |
| |
| vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p952>; |
| vdd-l2-l7-supply = <&vreg_bob>; |
| vdd-l3-supply = <&vreg_s2b_0p7>; |
| vdd-l5-supply = <&vreg_s2b_0p7>; |
| vdd-l6-l9-l10-supply = <&vreg_s8b_1p256>; |
| vdd-l8-supply = <&vreg_s7b_0p952>; |
| vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p856>; |
| vdd-l13-supply = <&vreg_s7b_0p952>; |
| vdd-l14-l16-supply = <&vreg_s8b_1p256>; |
| |
| /* |
| * S2, L4-L5 are ARCs: |
| * S2 - ebi.lvl, |
| * L4 - lmx.lvl, |
| * l5 - lcx.lvl. |
| * |
| * L10 are unused. |
| */ |
| |
| vdd19_pmu_rfa_i: |
| vreg_s1b_1p856: smps1 { |
| regulator-name = "vreg_s1b_1p856"; |
| regulator-min-microvolt = <1840000>; |
| regulator-max-microvolt = <2040000>; |
| }; |
| |
| vdd_pmu_aon_i: |
| vdd09_pmu_rfa_i: |
| vdd095_mx_pmu: |
| vdd095_pmu_1: |
| vdd095_pmu_2: |
| vreg_s7b_0p952: smps7 { |
| regulator-name = "vreg_s7b_0p952"; |
| regulator-min-microvolt = <535000>; |
| regulator-max-microvolt = <1120000>; |
| }; |
| |
| vdd13_pmu_rfa_i: |
| vreg_s8b_1p256: smps8 { |
| regulator-name = "vreg_s8b_1p256"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; |
| }; |
| |
| vreg_l1b_0p912: ldo1 { |
| regulator-name = "vreg_l1b_0p912"; |
| regulator-min-microvolt = <825000>; |
| regulator-max-microvolt = <925000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_a_usbhs_3p1: |
| vreg_l2b_3p072: ldo2 { |
| regulator-name = "vreg_l2b_3p072"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_io_ebi0_1: |
| vdd_io_ebi0_2: |
| vdd_io_ebi0_3: |
| vdd_io_ebi0_4: |
| vdd_io_ebi1_1: |
| vdd_io_ebi1_2: |
| vdd_io_ebi1_3: |
| vdd_io_ebi1_4: |
| vreg_l3b_0p6: ldo3 { |
| regulator-name = "vreg_l3b_0p6"; |
| regulator-min-microvolt = <312000>; |
| regulator-max-microvolt = <910000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_a_csi_01_1p2: |
| vdd_a_csi_23_1p2: |
| vdd_a_csi_4_1p2: |
| vdd_a_dsi_0_1p2: |
| vdd_a_qlink_0_1p2_ck: |
| vdd_a_qlink_1_1p2: |
| vdd_a_ufs_0_1p2: |
| vdd_vref_1p2_1: |
| vdd_vref_1p2_2: |
| vreg_l6b_1p2: ldo6 { |
| regulator-name = "vreg_l6b_1p2"; |
| regulator-min-microvolt = <1140000>; |
| regulator-max-microvolt = <1260000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7b_2p96: ldo7 { |
| regulator-name = "vreg_l7b_2p96"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8b_0p904: ldo8 { |
| regulator-name = "vreg_l8b_0p904"; |
| regulator-min-microvolt = <870000>; |
| regulator-max-microvolt = <970000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_px10: |
| vreg_l9b_1p2: ldo9 { |
| regulator-name = "vreg_l9b_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vddah_0: |
| vddah_1: |
| vddah_fbrx: |
| vddah_tx0: |
| vddah_tx0_1: |
| vddah_tx1: |
| vddah_tx1_1: |
| vreg_l11b_1p776: ldo11 { |
| regulator-name = "vreg_l11b_1p776"; |
| regulator-min-microvolt = <1504000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vddal_dig0: |
| vddal_dig_1: |
| vddal_dig_2: |
| vddal_dig_xo: |
| vddal_gps_l1: |
| vddal_gps_l5: |
| vddal_icon: |
| vddal_rx: |
| vddal_rx0: |
| vddal_rx1: |
| vddal_rx2: |
| vddal_tx0: |
| vddal_tx0_1: |
| vddal_tx1: |
| vddal_tx1_2: |
| vreg_l12b_0p8: ldo12 { |
| regulator-name = "vreg_l12b_0p8"; |
| regulator-min-microvolt = <751000>; |
| regulator-max-microvolt = <824000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_cx1: |
| vdd_cx2: |
| vreg_l13b_0p8: ldo13 { |
| regulator-name = "vreg_l13b_0p8"; |
| regulator-min-microvolt = <530000>; |
| regulator-max-microvolt = <824000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_1p2: |
| vdd_lna: |
| vddam_fbrx: |
| vddam_rx_0: |
| vddam_rx_1: |
| vddam_rx0: |
| vddam_rx1: |
| vddam_rx2: |
| vddam_rxe_a: |
| vddam_rxe_b: |
| vddam_rxe_c: |
| vddam_rxe_d: |
| vddam_rxe_e: |
| vddam_tx0: |
| vddam_tx0_1: |
| vddam_tx1: |
| vddam_tx1_1: |
| vddam_xo: |
| vreg_l14b_1p2: ldo14 { |
| regulator-name = "vreg_l14b_1p2"; |
| regulator-min-microvolt = <1080000>; |
| regulator-max-microvolt = <1304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_mx: |
| vddmx_tx: |
| vdd_phy: |
| vreg_l15b_0p88: ldo15 { |
| regulator-name = "vreg_l15b_0p88"; |
| regulator-min-microvolt = <765000>; |
| regulator-max-microvolt = <1020000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l16b_1p2: ldo16 { |
| regulator-name = "vreg_l16b_1p2"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_buck: |
| vreg_l17b_1p8: ldo17 { |
| regulator-name = "vreg_l17b_1p8"; |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <1900000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_px_wcd9385: |
| vdd_txrx: |
| vdd_px0: |
| vdd_px3: |
| vdd_px7: |
| vreg_l18b_1p8: ldo18 { |
| regulator-name = "vreg_l18b_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_1p8: |
| vdd_px_sdr735: |
| vdd_pxm: |
| vddio_px_1: |
| vddio_px_2: |
| vddio_px_3: |
| vdd18_io: |
| vddpx_ts: |
| vddpx_wl4otp: |
| vreg_l19b_1p8: ldo19 { |
| regulator-name = "vreg_l19b_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-1 { |
| compatible = "qcom,pm8350c-rpmh-regulators"; |
| qcom,pmic-id = "c"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s7-supply = <&vph_pwr>; |
| vdd-s9-supply = <&vph_pwr>; |
| vdd-s10-supply = <&vph_pwr>; |
| |
| vdd-l1-l12-supply = <&vreg_s1b_1p856>; |
| vdd-l2-l8-supply = <&vreg_s1b_1p856>; |
| vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; |
| vdd-l6-l9-l11-supply = <&vreg_bob>; |
| vdd-l10-supply = <&vreg_s7b_0p952>; |
| |
| vdd-bob-supply = <&vph_pwr>; |
| |
| /* |
| * S2, S5, S7, S10 are ARCs: |
| * S2 - cx.lvl, |
| * S5 - mss.lvl, |
| * S7 - gfx.lvl, |
| * S10 - mx.lvl. |
| */ |
| |
| vdd22_wlbtpa_ch0: |
| vdd22_wlbtpa_ch1: |
| vdd22_wlbtppa_ch0: |
| vdd22_wlbtppa_ch1: |
| vdd22_wlpa5g_ch0: |
| vdd22_wlpa5g_ch1: |
| vdd22_wlppa5g_ch0: |
| vdd22_wlppa5g_ch1: |
| vreg_s1c_2p2: smps1 { |
| regulator-name = "vreg_s1c_2p2"; |
| regulator-min-microvolt = <2190000>; |
| regulator-max-microvolt = <2210000>; |
| }; |
| |
| vdd_px1: |
| vreg_s9c_0p676: smps9 { |
| regulator-name = "vreg_s9c_0p676"; |
| regulator-min-microvolt = <1010000>; |
| regulator-max-microvolt = <1170000>; |
| }; |
| |
| vdd_a_apc_cs_1p8: |
| vdd_a_cxo_1p8: |
| vdd_a_gfx_cs_1p8: |
| vdd_a_qrefs_1p8: |
| vdd_a_turing_q6_cs_1p8: |
| vdd_a_usbhs_1p8: |
| vdd_qfprom: |
| vreg_l1c_1p8: ldo1 { |
| regulator-name = "vreg_l1c_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2c_1p8: ldo2 { |
| regulator-name = "vreg_l2c_1p8"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_ts: |
| vreg_l3c_3p0: ldo3 { |
| regulator-name = "vreg_l3c_3p0"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <3540000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_px5: |
| vreg_l4c_1p8_3p0: ldo4 { |
| regulator-name = "vreg_l4c_1p8_3p0"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_px6: |
| vreg_l5c_1p8_3p0: ldo5 { |
| regulator-name = "vreg_l5c_1p8_3p0"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_px2: |
| vreg_l6c_2p96: ldo6 { |
| regulator-name = "vreg_l6c_2p96"; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_sensor_3p3: |
| vreg_l7c_3p0: ldo7 { |
| regulator-name = "vreg_l7c_3p0"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_sensor_1p8: |
| vreg_l8c_1p8: ldo8 { |
| regulator-name = "vreg_l8c_1p8"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9c_2p96: ldo9 { |
| regulator-name = "vreg_l9c_2p96"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_a_csi_01_0p9: |
| vdd_a_csi_23_0p9: |
| vdd_a_csi_4_0p9: |
| vdd_a_dsi_0_0p9: |
| vdd_a_dsi_0_pll_0p9: |
| vdd_a_gnss_0p9: |
| vdd_a_qlink_0_0p9: |
| vdd_a_qlink_0_0p9_ck: |
| vdd_a_qlink_1_0p9: |
| vdd_a_qlink_1_0p9_ck: |
| vdd_a_qrefs_0p875_1: |
| vdd_a_qrefs_0p875_2: |
| vdd_a_qrefs_0p875_3: |
| vdd_a_qrefs_0p875_4: |
| vdd_a_qrefs_0p875_5: |
| vdd_a_qrefs_0p875_6: |
| vdd_a_qrefs_0p875_7: |
| vdd_a_qrefs_0p875_8: |
| vdd_a_qrefs_0p875_9: |
| vdd_a_ufs_0_core: |
| vdd_a_usbhs_core: |
| vdd_vref_0p9: |
| vreg_l10c_0p88: ldo10 { |
| regulator-name = "vreg_l10c_0p88"; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <1050000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_fm: |
| vdd_wlan_fem: |
| vreg_l11c_2p8: ldo11 { |
| regulator-name = "vreg_l11c_2p8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_io_oled: |
| vreg_l12c_1p8: ldo12 { |
| regulator-name = "vreg_l12c_1p8"; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_oled: |
| vreg_l13c_3p0: ldo13 { |
| regulator-name = "vreg_l13c_3p0"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vdd_flash: |
| vdd_mic_bias: |
| vreg_bob: bob { |
| regulator-name = "vreg_bob"; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| }; |
| }; |
| }; |
| |
| &cci0 { |
| /* |
| * cci0_i2c1 bus is unused and GPIO 71&72 are repurposed. |
| * So set only cci0_i2c0 pinctrl here. |
| */ |
| pinctrl-0 = <&cci0_default>; |
| pinctrl-1 = <&cci0_sleep>; |
| |
| status = "okay"; |
| }; |
| |
| &cci0_i2c0 { |
| /* D-PHY sony,imx471 (Front) @ 0x1a */ |
| |
| camf_p24c64f: eeprom@52 { |
| compatible = "puya,p24c64f", |
| "atmel,24c64"; |
| reg = <0x52>; |
| vcc-supply = <&vreg_cam_vio_1p8>; |
| read-only; |
| }; |
| }; |
| |
| &cci1 { |
| status = "okay"; |
| }; |
| |
| &cci1_i2c0 { |
| /* actuator (For Ultra Wide sensor) @ 0xc */ |
| /* D-PHY samsung,s5kjn1 (Ultra Wide) @ 0x2d */ |
| |
| camu_gt24p128e: eeprom@51 { |
| compatible = "giantec,gt24p128e", |
| "atmel,24c128"; |
| reg = <0x51>; |
| vcc-supply = <&vreg_cam_vio_1p8>; |
| read-only; |
| }; |
| }; |
| |
| &cci1_i2c1 { |
| /* actuator (For Wide sensor) @ 0xc */ |
| /* C-PHY sony,imx766 (Wide) @ 0x10 */ |
| |
| camw_gt24p128e: eeprom@50 { |
| compatible = "giantec,gt24p128e", |
| "atmel,24c128"; |
| reg = <0x50>; |
| vcc-supply = <&vreg_cam_vio_1p8>; |
| read-only; |
| }; |
| }; |
| |
| &gcc { |
| protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, |
| <GCC_MSS_CFG_AHB_CLK>, |
| <GCC_MSS_OFFLINE_AXI_CLK>, |
| <GCC_MSS_Q6SS_BOOT_CLK_SRC>, |
| <GCC_MSS_Q6_MEMNOC_AXI_CLK>, |
| <GCC_MSS_SNOC_AXI_CLK>, |
| <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, |
| <GCC_QSPI_CORE_CLK>, |
| <GCC_QSPI_CORE_CLK_SRC>, |
| <GCC_SEC_CTRL_CLK_SRC>, |
| <GCC_WPSS_AHB_BDG_MST_CLK>, |
| <GCC_WPSS_AHB_CLK>, |
| <GCC_WPSS_RSCP_CLK>; |
| }; |
| |
| &gpi_dma0 { |
| status = "okay"; |
| }; |
| |
| &gpi_dma1 { |
| status = "okay"; |
| }; |
| |
| &gpu { |
| status = "okay"; |
| }; |
| |
| &gpu_zap_shader { |
| firmware-name = "qcom/sm7325/nothing/spacewar/a660_zap.mbn"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| /* awinic,aw21018 (Glyph LED) @ 20 */ |
| |
| typec-mux@42 { |
| compatible = "fcs,fsa4480"; |
| reg = <0x42>; |
| |
| vcc-supply = <&vreg_bob>; |
| |
| mode-switch; |
| orientation-switch; |
| |
| port { |
| fsa4480_sbu_mux: endpoint { |
| remote-endpoint = <&pmic_glink_sbu>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| /* nxp,tfa9873 (EAR speaker codec) @ 34 */ |
| /* nxp,tfa9873 (Main speaker codec) @ 35 */ |
| }; |
| |
| &i2c9 { |
| clock-frequency = <1000000>; |
| status = "okay"; |
| |
| nfc@28 { |
| compatible = "nxp,pn553", |
| "nxp,nxp-nci-i2c"; |
| reg = <0x28>; |
| |
| interrupt-parent = <&tlmm>; |
| interrupts = <41 IRQ_TYPE_EDGE_RISING>; |
| |
| enable-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; |
| firmware-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-0 = <&nfc_en>, |
| <&nfc_clk_req>, |
| <&nfc_dwl_req>, |
| <&nfc_int_req>; |
| pinctrl-names = "default"; |
| }; |
| }; |
| |
| &ipa { |
| qcom,gsi-loader = "self"; |
| memory-region = <&ipa_fw_mem>; |
| firmware-name = "qcom/sm7325/nothing/spacewar/ipa_fws.mbn"; |
| |
| status = "okay"; |
| }; |
| |
| &mdss { |
| status = "okay"; |
| }; |
| |
| &mdss_dsi { |
| vdda-supply = <&vdd_a_dsi_0_1p2>; |
| status = "okay"; |
| |
| panel: panel@0 { |
| compatible = "nothing,rm692e5-spacewar", |
| "visionox,rm692e5"; |
| reg = <0>; |
| |
| reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; |
| |
| vdd-supply = <&vdd_oled>; |
| vddio-supply = <&vdd_io_oled>; |
| |
| pinctrl-0 = <&lcd_reset_n>, |
| <&mdp_vsync_p>; |
| pinctrl-names = "default"; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&mdss_dsi0_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &mdss_dsi0_out { |
| data-lanes = <0 1 2 3>; |
| remote-endpoint = <&panel_in>; |
| }; |
| |
| &mdss_dsi_phy { |
| vdds-supply = <&vdd_a_dsi_0_0p9>; |
| status = "okay"; |
| }; |
| |
| &pm7325_gpios { |
| gpio-line-names = "NC", /* GPIO_1 */ |
| "PA_THERM3", |
| "PA_THERM4", |
| "NC", |
| "NC", |
| "KYPD_VOLP_N", |
| "NC", |
| "NC", |
| "NC", |
| "NC"; /* GPIO_10 */ |
| |
| kypd_volp_n: kypd-volp-n-state { |
| pins = "gpio6"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| bias-pull-up; |
| input-enable; |
| power-source = <1>; |
| }; |
| }; |
| |
| &pm8350c_flash { |
| status = "okay"; |
| |
| led-0 { |
| function = LED_FUNCTION_FLASH; |
| color = <LED_COLOR_ID_WHITE>; |
| led-sources = <1>, <4>; |
| led-max-microamp = <500000>; |
| flash-max-microamp = <1500000>; |
| flash-max-timeout-us = <1280000>; |
| }; |
| }; |
| |
| &pmk8350_adc_tm { |
| status = "okay"; |
| |
| /* PMK8350 */ |
| xo-therm@0 { |
| reg = <0>; |
| io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| |
| /* PM7325 */ |
| quiet-therm@1 { |
| reg = <1>; |
| io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| |
| cam-flash-therm@2 { |
| reg = <2>; |
| io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| |
| sdm-skin-therm@3 { |
| reg = <3>; |
| io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| |
| wide-rfc-therm@4 { |
| reg = <4>; |
| io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| |
| /* PM8350B */ |
| usb-conn-therm@5 { |
| reg = <5>; |
| io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| |
| chg-skin-therm@6 { |
| reg = <6>; |
| io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| }; |
| |
| &pmk8350_rtc { |
| status = "okay"; |
| }; |
| |
| &pmk8350_vadc { |
| /* PMK8350 */ |
| channel@44 { |
| reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pmk8350_xo_therm"; |
| }; |
| |
| /* PM7325 */ |
| channel@144 { |
| reg = <PM7325_ADC7_AMUX_THM1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pm7325_quiet_therm"; |
| }; |
| |
| channel@145 { |
| reg = <PM7325_ADC7_AMUX_THM2_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pm7325_cam_flash_therm"; |
| }; |
| |
| channel@146 { |
| reg = <PM7325_ADC7_AMUX_THM3_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pm7325_sdm_skin_therm"; |
| }; |
| |
| channel@147 { |
| reg = <PM7325_ADC7_AMUX_THM4_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pm7325_wide_rfc_therm"; |
| }; |
| |
| channel@14a { |
| reg = <PM7325_ADC7_GPIO1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pm7325_pa3_therm"; |
| }; |
| |
| channel@14b { |
| reg = <PM7325_ADC7_GPIO2_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pm7325_pa4_therm"; |
| }; |
| |
| /* PM8350B */ |
| channel@344 { |
| reg = <PM8350B_ADC7_AMUX_THM1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pm8350b_batt_therm"; |
| }; |
| |
| channel@347 { |
| reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pm8350b_usb_conn_therm"; |
| }; |
| |
| channel@34b { |
| reg = <PM8350B_ADC7_GPIO2_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pm8350b_chg_skin_therm"; |
| }; |
| |
| channel@34c { |
| reg = <PM8350B_ADC7_GPIO3_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "pm8350b_usb_therm2"; |
| }; |
| }; |
| |
| &pon_pwrkey { |
| status = "okay"; |
| }; |
| |
| &pon_resin { |
| linux,code = <KEY_VOLUMEDOWN>; |
| status = "okay"; |
| }; |
| |
| &q6afedai { |
| dai@16 { |
| reg = <PRIMARY_MI2S_RX>; |
| qcom,sd-lines = <1>; |
| }; |
| }; |
| |
| &q6asmdai { |
| dai@0 { |
| reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; |
| }; |
| }; |
| |
| &qfprom { |
| vcc-supply = <&vdd_qfprom>; |
| }; |
| |
| &qup_uart5_rx { |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| &qup_uart5_tx { |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| &qupv3_id_0 { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_1 { |
| status = "okay"; |
| }; |
| |
| &remoteproc_adsp { |
| firmware-name = "qcom/sm7325/nothing/spacewar/adsp.mbn"; |
| status = "okay"; |
| }; |
| |
| &remoteproc_cdsp { |
| firmware-name = "qcom/sm7325/nothing/spacewar/cdsp.mbn"; |
| status = "okay"; |
| }; |
| |
| &remoteproc_mpss { |
| firmware-name = "qcom/sm7325/nothing/spacewar/modem.mbn"; |
| status = "okay"; |
| }; |
| |
| &remoteproc_wpss { |
| firmware-name = "qcom/sm7325/nothing/spacewar/wpss.mbn"; |
| status = "okay"; |
| }; |
| |
| &spi13 { |
| status = "okay"; |
| |
| /* focaltech,ft3680 (Touchscreen) @ 0 */ |
| }; |
| |
| &tlmm { |
| /* 56-59: Fingerprint reader (SPI) */ |
| gpio-reserved-ranges = <56 4>; |
| |
| bt_uart_sleep_cts: bt-uart-sleep-cts-state { |
| pins = "gpio28"; |
| function = "gpio"; |
| bias-bus-hold; |
| }; |
| |
| bt_uart_sleep_rts: bt-uart-sleep-rts-state { |
| pins = "gpio29"; |
| function = "gpio"; |
| bias-pull-down; |
| }; |
| |
| bt_uart_sleep_txd: bt-uart-sleep-txd-state { |
| pins = "gpio30"; |
| function = "gpio"; |
| bias-pull-up; |
| }; |
| |
| bt_uart_sleep_rxd: bt-uart-sleep-rxd-state { |
| pins = "gpio31"; |
| function = "gpio"; |
| bias-pull-up; |
| }; |
| |
| nfc_en: nfc-en-state { |
| pins = "gpio38"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| nfc_clk_req: nfc-clk-req-state { |
| pins = "gpio39"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| nfc_dwl_req: nfc-dwl-req-state { |
| pins = "gpio40"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| nfc_int_req: nfc-int-req-state { |
| pins = "gpio41"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| lcd_reset_n: lcd-reset-n-state { |
| pins = "gpio44"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| mdp_vsync_p: mdp-vsync-p-state { |
| pins = "gpio80"; |
| function = "mdp_vsync"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| hst_bt_en: hst-bt-en-state { |
| pins = "gpio85"; |
| function = "gpio"; |
| output-low; |
| bias-disable; |
| }; |
| |
| hst_sw_ctrl: hst-sw-ctrl-state { |
| pins = "gpio86"; |
| function = "gpio"; |
| bias-pull-down; |
| }; |
| }; |
| |
| &uart5 { |
| status = "okay"; |
| }; |
| |
| &uart7 { |
| /delete-property/interrupts; |
| interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, |
| <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; |
| |
| pinctrl-1 = <&bt_uart_sleep_cts>, |
| <&bt_uart_sleep_rts>, |
| <&bt_uart_sleep_txd>, |
| <&bt_uart_sleep_rxd>; |
| pinctrl-names = "default", "sleep"; |
| |
| status = "okay"; |
| |
| bluetooth: bluetooth { |
| compatible = "qcom,wcn6750-bt"; |
| |
| pinctrl-0 = <&hst_bt_en>, |
| <&hst_sw_ctrl>; |
| pinctrl-names = "default"; |
| |
| enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; |
| swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; |
| |
| vddio-supply = <&vreg_l19b_1p8>; |
| vddaon-supply = <&vreg_s7b_0p952>; |
| vddbtcxmx-supply = <&vreg_s7b_0p952>; |
| vddrfacmn-supply = <&vreg_s7b_0p952>; |
| vddrfa0p8-supply = <&vreg_s7b_0p952>; |
| vddrfa1p7-supply = <&vdd19_pmu_rfa_i>; |
| vddrfa1p2-supply = <&vdd13_pmu_rfa_i>; |
| vddrfa2p2-supply = <&vreg_s1c_2p2>; |
| vddasd-supply = <&vreg_l11c_2p8>; |
| max-speed = <3200000>; |
| |
| qcom,local-bd-address-broken; |
| }; |
| }; |
| |
| &ufs_mem_hc { |
| reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; |
| |
| vcc-supply = <&vreg_l7b_2p96>; |
| vcc-max-microamp = <800000>; |
| /* |
| * Technically l9b enables an eLDO (supplied by s1b) which then powers |
| * VCCQ2 of the UFS. |
| */ |
| vccq-supply = <&vreg_l9b_1p2>; |
| vccq-max-microamp = <900000>; |
| |
| status = "okay"; |
| }; |
| |
| &ufs_mem_phy { |
| vdda-phy-supply = <&vdd_a_ufs_0_core>; |
| vdda-pll-supply = <&vdd_a_ufs_0_1p2>; |
| status = "okay"; |
| }; |
| |
| &usb_1 { |
| /* USB 2.0 only */ |
| qcom,select-utmi-as-pipe-clk; |
| dr_mode = "otg"; |
| usb-role-switch; |
| maximum-speed = "high-speed"; |
| /* Remove USB3 phy */ |
| phys = <&usb_1_hsphy>; |
| phy-names = "usb2-phy"; |
| |
| status = "okay"; |
| }; |
| |
| &usb_1_dwc3_hs { |
| remote-endpoint = <&pmic_glink_hs_in>; |
| }; |
| |
| &usb_1_hsphy { |
| vdda-pll-supply = <&vdd_a_usbhs_core>; |
| vdda18-supply = <&vdd_a_usbhs_1p8>; |
| vdda33-supply = <&vdd_a_usbhs_3p1>; |
| status = "okay"; |
| }; |
| |
| &venus { |
| firmware-name = "qcom/sm7325/nothing/spacewar/vpu20_1v.mbn"; |
| status = "okay"; |
| }; |
| |
| &wifi { |
| status = "okay"; |
| }; |
