| # SPDX-License-Identifier: GPL-2.0 | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Synopsys DesignWare ABP UART | |
| maintainers: | |
| - Rob Herring <robh@kernel.org> | |
| allOf: | |
| - $ref: serial.yaml# | |
| - $ref: rs485.yaml# | |
| - if: | |
| properties: | |
| compatible: | |
| items: | |
| - {} | |
| - const: renesas,rzn1-uart | |
| - const: snps,dw-apb-uart | |
| then: | |
| properties: | |
| dmas: false | |
| dma-names: false | |
| - if: | |
| properties: | |
| compatible: | |
| contains: | |
| const: starfive,jh7110-uart | |
| then: | |
| properties: | |
| resets: | |
| minItems: 2 | |
| else: | |
| properties: | |
| resets: | |
| maxItems: 1 | |
| properties: | |
| compatible: | |
| oneOf: | |
| - items: | |
| - const: renesas,r9a06g032-uart | |
| - const: renesas,rzn1-uart | |
| - const: snps,dw-apb-uart | |
| - items: | |
| - const: renesas,r9a06g032-uart | |
| - const: renesas,rzn1-uart | |
| - items: | |
| - enum: | |
| - brcm,bcm11351-dw-apb-uart | |
| - brcm,bcm21664-dw-apb-uart | |
| - rockchip,px30-uart | |
| - rockchip,rk1808-uart | |
| - rockchip,rk3036-uart | |
| - rockchip,rk3066-uart | |
| - rockchip,rk3128-uart | |
| - rockchip,rk3188-uart | |
| - rockchip,rk3288-uart | |
| - rockchip,rk3308-uart | |
| - rockchip,rk3328-uart | |
| - rockchip,rk3368-uart | |
| - rockchip,rk3399-uart | |
| - rockchip,rk3528-uart | |
| - rockchip,rk3562-uart | |
| - rockchip,rk3568-uart | |
| - rockchip,rk3576-uart | |
| - rockchip,rk3588-uart | |
| - rockchip,rv1108-uart | |
| - rockchip,rv1126-uart | |
| - sophgo,sg2044-uart | |
| - starfive,jh7100-hsuart | |
| - starfive,jh7100-uart | |
| - starfive,jh7110-uart | |
| - const: snps,dw-apb-uart | |
| - const: snps,dw-apb-uart | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| clock-frequency: true | |
| clocks: | |
| minItems: 1 | |
| maxItems: 2 | |
| clock-names: | |
| items: | |
| - const: baudclk | |
| - const: apb_pclk | |
| dmas: | |
| maxItems: 2 | |
| dma-names: | |
| items: | |
| - const: tx | |
| - const: rx | |
| snps,uart-16550-compatible: | |
| description: reflects the value of UART_16550_COMPATIBLE configuration | |
| parameter. Define this if your UART does not implement the busy functionality. | |
| type: boolean | |
| power-domains: | |
| maxItems: 1 | |
| resets: | |
| minItems: 1 | |
| maxItems: 2 | |
| reg-shift: true | |
| reg-io-width: true | |
| dcd-override: | |
| description: Override the DCD modem status signal. This signal will | |
| always be reported as active instead of being obtained from the modem | |
| status register. Define this if your serial port does not use this | |
| pin. | |
| type: boolean | |
| dsr-override: | |
| description: Override the DTS modem status signal. This signal will | |
| always be reported as active instead of being obtained from the modem | |
| status register. Define this if your serial port does not use this | |
| pin. | |
| type: boolean | |
| cts-override: | |
| description: Override the CTS modem status signal. This signal will | |
| always be reported as active instead of being obtained from the modem | |
| status register. Define this if your serial port does not use this | |
| pin. | |
| type: boolean | |
| ri-override: | |
| description: Override the RI modem status signal. This signal will always | |
| be reported as inactive instead of being obtained from the modem status | |
| register. Define this if your serial port does not use this pin. | |
| type: boolean | |
| required: | |
| - compatible | |
| - reg | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| serial@80230000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x80230000 0x100>; | |
| clock-frequency = <3686400>; | |
| interrupts = <10>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| dcd-override; | |
| dsr-override; | |
| cts-override; | |
| ri-override; | |
| }; | |
| - | | |
| // Example with one clock: | |
| serial@80230000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x80230000 0x100>; | |
| clocks = <&baudclk>; | |
| interrupts = <10>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| }; | |
| - | | |
| // Example with two clocks: | |
| serial@80230000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x80230000 0x100>; | |
| clocks = <&baudclk>, <&apb_pclk>; | |
| clock-names = "baudclk", "apb_pclk"; | |
| interrupts = <10>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| }; | |
| ... |