| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/serial/brcm,bcm7271-uart.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Broadcom 8250 based serial port | |
| maintainers: | |
| - Al Cooper <alcooperx@gmail.com> | |
| allOf: | |
| - $ref: serial.yaml# | |
| description: |+ | |
| The Broadcom UART is based on the basic 8250 UART but with | |
| enhancements for more accurate high speed baud rates and support | |
| for DMA. | |
| properties: | |
| compatible: | |
| items: | |
| - enum: | |
| - brcm,bcm7271-uart | |
| - brcm,bcm7278-uart | |
| reg: | |
| minItems: 1 | |
| maxItems: 5 | |
| reg-names: | |
| description: The UART register block and optionally the DMA register blocks. | |
| oneOf: | |
| - items: | |
| - const: uart | |
| - items: | |
| - const: uart | |
| - const: dma_arb | |
| - const: dma_rx | |
| - const: dma_tx | |
| - const: dma_intr2 | |
| clocks: | |
| maxItems: 1 | |
| clock-names: | |
| const: sw_baud | |
| interrupts: | |
| minItems: 1 | |
| maxItems: 2 | |
| interrupt-names: | |
| description: The UART interrupt and optionally the DMA interrupt. | |
| minItems: 1 | |
| items: | |
| - const: uart | |
| - const: dma | |
| required: | |
| - compatible | |
| - reg | |
| - reg-names | |
| - clocks | |
| - clock-names | |
| - interrupts | |
| - interrupt-names | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| serial@840d000 { | |
| compatible = "brcm,bcm7271-uart"; | |
| reg = <0x840d000 0x20>; | |
| reg-names = "uart"; | |
| interrupts = <0x0 0x62 0x4>; | |
| interrupt-names = "uart"; | |
| clocks = <&scmi_clk 190>; | |
| clock-names = "sw_baud"; | |
| }; | |
| serial@840e000 { | |
| compatible = "brcm,bcm7271-uart"; | |
| reg = <0x840e000 0x20>, | |
| <0x840e080 0x8>, | |
| <0x840e100 0xa8>, | |
| <0x840e200 0x4c>, | |
| <0x840e300 0x30>; | |
| reg-names = "uart", "dma_arb", "dma_rx", "dma_tx", "dma_intr2"; | |
| interrupts = <0x0 0x62 0x4>, <0x0 0x75 0x4>; | |
| interrupt-names = "uart", "dma"; | |
| clocks = <&scmi_clk 190>; | |
| clock-names = "sw_baud"; | |
| }; |